AT_BANNER([ofproto])
AT_SETUP([ofproto - echo request])
-OFPROTO_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN probe br0])
-OFPROTO_STOP
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -vwarn probe br0])
+OVS_VSWITCHD_STOP
AT_CLEANUP
AT_SETUP([ofproto - feature request, config request])
-OFPROTO_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN show br0], [0], [stdout])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
-OFPT_FEATURES_REPLY: ver:0x1, dpid:fedcba9876543210
-n_tables:2, n_buffers:256
-features: capabilities:0x87, actions:0xfff
- LOCAL(br0): addr:aa:55:aa:55:00:00, config: 0x1, state:0x1
+OFPT_FEATURES_REPLY: dpid:fedcba9876543210
+n_tables:255, n_buffers:256
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
+actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
-OFPROTO_STOP
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - port stats])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -vwarn dump-ports br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_PORT reply: 1 ports
+ port 65534: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=0, bytes=0, drop=0, errs=0, coll=0
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - port-desc stats])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -vwarn dump-ports-desc br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_PORT_DESC reply:
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - queue stats])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -vwarn queue-stats br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_QUEUE reply: 0 queues
+])
+OVS_VSWITCHD_STOP
AT_CLEANUP
AT_SETUP([ofproto - mod-port])
-OFPROTO_START
+OVS_VSWITCHD_START
for command_config_state in \
'up 0 0' \
- 'noflood 0x10 0' \
- 'down 0x11 0x1' \
- 'flood 0x1 0x1'
+ 'noflood NO_FLOOD 0' \
+ 'down PORT_DOWN,NO_FLOOD LINK_DOWN' \
+ 'flood PORT_DOWN LINK_DOWN'
do
set $command_config_state
- command=$[1] config=$[2] state=$[3]
- AT_CHECK([ovs-ofctl -vANY:ANY:WARN mod-port br0 br0 $command])
- AT_CHECK([ovs-ofctl -vANY:ANY:WARN show br0], [0], [stdout])
+ command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
+ AT_CHECK([ovs-ofctl -vwarn mod-port br0 br0 $command])
+ AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
-OFPT_FEATURES_REPLY: ver:0x1, dpid:fedcba9876543210
-n_tables:2, n_buffers:256
-features: capabilities:0x87, actions:0xfff
- LOCAL(br0): addr:aa:55:aa:55:00:00, config: $config, state:$state
+OFPT_FEATURES_REPLY: dpid:fedcba9876543210
+n_tables:255, n_buffers:256
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
+actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: $config
+ state: $state
+ speed: 100 Mbps now, 100 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
done
-OFPROTO_STOP
+OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - basic flow_mod commands])
-OFPROTO_START
-AT_CHECK([ovs-ofctl dump-flows br0 | STRIP_XIDS], [0], [NXST_FLOW reply:
+AT_SETUP([ofproto - basic flow_mod commands (NXM)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
])
AT_CHECK([echo 'in_port=1,actions=0' | ovs-ofctl add-flows br0 -])
AT_CHECK([ovs-ofctl add-flow br0 in_port=0,actions=1])
-dnl Tests for a bug in which ofproto ignored tun_id in tun_id_from_cookie
-dnl flow_mod commands.
-AT_CHECK([ovs-ofctl add-flow -F tun_id_from_cookie br0 tun_id=1,actions=mod_vlan_vid:4])
-AT_CHECK([ovs-ofctl dump-flows br0 | STRIP_XIDS | STRIP_DURATION | sort], [0], [dnl
- cookie=0x0, duration=?s, table_id=0, n_packets=0, n_bytes=0, in_port=0 actions=output:1
- cookie=0x0, duration=?s, table_id=0, n_packets=0, n_bytes=0, in_port=1 actions=output:0
- cookie=0x100000000, duration=?s, table_id=0, n_packets=0, n_bytes=0, tun_id=0x1 actions=mod_vlan_vid:4
+AT_CHECK([ovs-ofctl -F nxm add-flow br0 table=1,in_port=3,actions=2])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=0 actions=output:1
+ in_port=1 actions=output:0
+ table=1, in_port=3 actions=output:2
NXST_FLOW reply:
])
+AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
+])
AT_CHECK([ovs-ofctl del-flows br0])
-AT_CHECK([ovs-ofctl dump-flows br0 | STRIP_XIDS], [0], [NXST_FLOW reply:
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply:
+])
+AT_CHECK([echo 'in_port=1,actions=0' | ovs-ofctl -F openflow10 add-flows br0 -])
+AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 in_port=0,actions=1])
+AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 table=1,in_port=3,actions=2])
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=0 actions=output:1
+ in_port=1 actions=output:0
+ table=1, in_port=3 actions=output:2
+OFPST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl -F openflow10 dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+OFPST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
+])
+AT_CHECK([ovs-ofctl -F openflow10 del-flows br0])
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - dump flows with cookie])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x2, in_port=2 actions=output:0
+ cookie=0x3, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=3
+])
+AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3 | ofctl_strip | sort], [0], [dnl
+ cookie=0x3, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3 | STRIP_XIDS], [0], [dnl
+NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=1
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - dump flows with cookie mask])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x2, in_port=2 actions=output:0
+ cookie=0x3, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=3
+])
+AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3/0x1 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x3, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3/0x1 | STRIP_XIDS], [0], [dnl
+NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows with cookie])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x2, in_port=2 actions=output:0
+ cookie=0x3, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x2, in_port=2 actions=output:0
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows with cookie mask])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x2, in_port=2 actions=output:0
+ cookie=0x3, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3/0x1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=2 actions=output:0
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow table configuration])
+OVS_VSWITCHD_START
+# Check the default configuration.
+(echo "OFPST_TABLE reply (xid=0x1): 255 tables
+ 0: classifier: wild=0x3fffff, max=1000000, active=0
+ lookup=0, matched=0"
+ x=1
+ while test $x -lt 254; do
+ printf " %d: %-8s: wild=0x3fffff, max=1000000, active=0
+ lookup=0, matched=0
+" $x table$x
+ x=`expr $x + 1`
+ done
+ echo " 254: table254: wild=0x3fffff, max=1000000, active=2
+ lookup=0, matched=0") > expout
+AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
+# Change the configuration.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=main \
+ -- --id=@t1 create Flow_Table flow-limit=1024 \
+ -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
+ | perl $srcdir/uuidfilt.pl],
+ [0], [<0>
+<1>
+])
+# Check that the configuration was updated.
+mv expout orig-expout
+(echo "OFPST_TABLE reply (xid=0x1): 255 tables
+ 0: main : wild=0x3fffff, max=1000000, active=0
+ lookup=0, matched=0
+ 1: table1 : wild=0x3fffff, max= 1024, active=0
+ lookup=0, matched=0"
+ tail -n +6 orig-expout) > expout
+AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - hard limits on flow table size])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | perl $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+for in_port in 1 2 3 4; do
+ ovs-ofctl add-flow br0 in_port=$in_port,actions=drop
+done
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=drop
+ in_port=2 actions=drop
+ in_port=3 actions=drop
+ in_port=4 actions=drop
+NXST_FLOW reply:
+])
+# Adding another flow will be refused.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
])
-OFPROTO_STOP
+# Also a mod-flow that would add a flow will be refused.
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=5,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
+])
+# Replacing or modifying an existing flow is allowed.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=4,actions=normal])
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=3,actions=output:1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=drop
+ in_port=2 actions=drop
+ in_port=3 actions=output:1
+ in_port=4 actions=NORMAL
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - eviction upon table overflow])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | perl $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+for in_port in 4 3 2 1; do
+ ovs-ofctl add-flow br0 idle_timeout=${in_port}0,in_port=$in_port,actions=drop
+done
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=1 actions=drop
+ idle_timeout=20, in_port=2 actions=drop
+ idle_timeout=30, in_port=3 actions=drop
+ idle_timeout=40, in_port=4 actions=drop
+NXST_FLOW reply:
+])
+# Adding another flow will cause the one that expires soonest to be evicted.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=20, in_port=2 actions=drop
+ idle_timeout=30, in_port=3 actions=drop
+ idle_timeout=40, in_port=4 actions=drop
+ in_port=5 actions=drop
+NXST_FLOW reply:
+])
+# A mod-flow that adds a flow also causes eviction, but replacing or
+# modifying an existing flow doesn't.
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=6,actions=drop])
+AT_CHECK([ovs-ofctl add-flow br0 in_port=4,actions=normal])
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=3,actions=output:1])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=30, in_port=3 actions=output:1
+ in_port=4 actions=NORMAL
+ in_port=5 actions=drop
+ in_port=6 actions=drop
+NXST_FLOW reply:
+])
+# Flows with no timeouts at all cannot be evicted.
+AT_CHECK([ovs-ofctl add-flow br0 in_port=7,actions=normal])
+AT_CHECK([ovs-ofctl add-flow br0 in_port=8,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
+])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=4 actions=NORMAL
+ in_port=5 actions=drop
+ in_port=6 actions=drop
+ in_port=7 actions=NORMAL
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - eviction upon table overflow, with fairness])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
+ overflow-policy=evict \
+ groups='"NXM_OF_IN_PORT[[]]"' \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | perl $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Add 4 flows.
+ovs-ofctl add-flows br0 - <<EOF
+idle_timeout=10 in_port=2 dl_src=00:44:55:66:77:88 actions=drop
+idle_timeout=20 in_port=1 dl_src=00:11:22:33:44:55 actions=drop
+idle_timeout=30 in_port=1 dl_src=00:22:33:44:55:66 actions=drop
+idle_timeout=40 in_port=1 dl_src=00:33:44:55:66:77 actions=drop
+EOF
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=20, in_port=1,dl_src=00:11:22:33:44:55 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+NXST_FLOW reply:
+])
+# Adding another flow will cause the one that expires soonest within
+# the largest group (those with in_port=1) to be evicted. In this
+# case this is not the same as the one that expires soonest overall
+# (which is what makes the test interesting):
+AT_CHECK([ovs-ofctl add-flow br0 in_port=2,dl_src=00:55:66:77:88:99,actions=drop])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+NXST_FLOW reply:
+])
+# Enlarge the flow limit, change the eviction policy back to strictly
+# based on expiration, and and add some flows.
+AT_CHECK([ovs-vsctl set Flow_Table evict groups='[[]]' flow-limit=7])
+ovs-ofctl add-flows br0 - <<EOF
+idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=drop
+idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=drop
+idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=drop
+EOF
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+NXST_FLOW reply:
+])
+# Adding another flow will cause the one that expires soonest overall
+# to be evicted.
+AT_CHECK([ovs-ofctl add-flow br0 'idle_timeout=80 in_port=2 dl_src=00:99:aa:bb:cc:dd actions=drop'])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+NXST_FLOW reply:
+])
+# Reducing the flow limit also causes the flows that expire soonest
+# overall to be evicted.
+AT_CHECK([ovs-vsctl set Flow_Table evict flow-limit=4])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
+ in_port=2,dl_src=00:55:66:77:88:99 actions=drop
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - asynchronous message control])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+check_async () {
+ printf '\n\n--- check_async %d ---\n\n\n' $1
+ shift
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ : > expout
+
+ # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
+ ovs-ofctl -v packet-out br0 none controller '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_ACTION"; then shift;
+ echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=NONE (via action) data_len=14 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
+ ovs-ofctl -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_NO_MATCH"; then shift;
+ echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=NONE (via no_match) data_len=14 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
+ ovs-ofctl packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
+ echo >>expout "OFPT_PACKET_IN: total_len=76 in_port=NONE (via invalid_ttl) data_len=76 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(00:26:b9:8c:b0:f9->00:25:83:df:b4:00) type:0800 proto:17 tos:0 ttl:0 ip(172.17.55.13->172.16.0.2) port(55155->53) udp_csum:8f6d"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_ADD
+ ovs-vsctl add-port br0 test -- set Interface test type=dummy
+ if test X"$1" = X"OFPPR_ADD"; then shift;
+ echo >>expout "OFPT_PORT_STATUS: ADD: 1(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_DELETE
+ ovs-vsctl del-port br0 test
+ if test X"$1" = X"OFPPR_DELETE"; then shift;
+ echo >>expout "OFPT_PORT_STATUS: DEL: 1(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max"
+ fi
+
+ # OFPT_FLOW_REMOVED, OFPRR_DELETE
+ ovs-ofctl add-flow br0 send_flow_rem,actions=drop
+ ovs-ofctl --strict del-flows br0 ''
+ if test X"$1" = X"OFPRR_DELETE"; then shift;
+ echo >>expout "OFPT_FLOW_REMOVED: reason=delete"
+ fi
+ AT_FAIL_IF([test X"$1" != X])
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ echo >>expout "OFPT_BARRIER_REPLY:"
+
+ AT_CHECK(
+ [[sed '
+s/ (xid=0x[0-9a-fA-F]*)//
+s/ *duration.*//
+s/00:0.$/00:0x/' < monitor.log]],
+ [0], [expout])
+}
+
+# It's a service connection so initially there should be no async messages.
+check_async 1
+
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
+check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE
+
+# Set miss_send_len to 128 and enable invalid_ttl.
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700040080
+check_async 3 OFPR_ACTION OFPR_INVALID_TTL OFPPR_ADD OFPPR_DELETE OFPRR_DELETE
+
+# Become slave, which should disable everything except port status.
+ovs-appctl -t ovs-ofctl ofctl/send 0104001400000002000023200000000a00000002
+check_async 4 OFPPR_ADD OFPPR_DELETE
+
+# Use NXT_SET_ASYNC_CONFIG to enable a patchwork of asynchronous messages.
+ovs-appctl -t ovs-ofctl ofctl/send 01040028000000020000232000000013000000020000000500000005000000020000000200000005
+check_async 5 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE
+
+# Set controller ID 123.
+ovs-appctl -t ovs-ofctl ofctl/send 01040018000000030000232000000014000000000000007b
+check_async 6 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE
+
+# Restore controller ID 0.
+ovs-appctl -t ovs-ofctl ofctl/send 010400180000000300002320000000140000000000000000
+
+# Become master.
+ovs-appctl -t ovs-ofctl ofctl/send 0104001400000002000023200000000a00000001
+check_async 7 OFPR_ACTION OFPPR_ADD
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
+dnl specified by OpenFlow 1.0) and OFPP_CONTROLLER (used by some
+dnl controllers despite the spec) as meaning a packet that was generated
+dnl by the controller.
+AT_SETUP([ofproto - packet-out from controller])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
+AT_CHECK([ovs-ofctl packet-out br0 none controller '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl packet-out br0 65533 controller '0001020304050010203040505678'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN: total_len=14 in_port=NONE (via action) data_len=14 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)
+OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:5678 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP
AT_CLEANUP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff