AT_SETUP([ofproto - echo request])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN probe br0])
+AT_CHECK([ovs-ofctl -vwarn probe br0])
OVS_VSWITCHD_STOP
AT_CLEANUP
AT_SETUP([ofproto - feature request, config request])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN show br0], [0], [stdout])
+AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
-OFPT_FEATURES_REPLY: ver:0x1, dpid:fedcba9876543210
+OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:255, n_buffers:256
-features: capabilities:0xc7, actions:0xfff
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
+actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
LOCAL(br0): addr:aa:55:aa:55:00:00
config: PORT_DOWN
state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
OVS_VSWITCHD_STOP
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - port stats])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN dump-ports br0], [0], [stdout])
+AT_CHECK([ovs-ofctl -vwarn dump-ports br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_PORT reply: 1 ports
port 65534: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - port-desc stats])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -vwarn dump-ports-desc br0], [0], [stdout])
+AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+OFPST_PORT_DESC reply:
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - queue stats])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vANY:ANY:WARN queue-stats br0], [0], [stdout])
+AT_CHECK([ovs-ofctl -vwarn queue-stats br0], [0], [stdout])
AT_CHECK([STRIP_XIDS stdout], [0], [dnl
OFPST_QUEUE reply: 0 queues
])
+AT_CHECK([ovs-ofctl -vwarn queue-stats br0 ALL 5], [0],
+ [OFPT_ERROR (xid=0x1): OFPQOFC_BAD_QUEUE
+OFPST_QUEUE request (xid=0x1):port=ALL queue=5
+])
+AT_CHECK([ovs-ofctl -vwarn queue-stats br0 10], [0],
+ [OFPT_ERROR (xid=0x1): OFPQOFC_BAD_PORT
+OFPST_QUEUE request (xid=0x1):port=10 queue=ALL
+])
OVS_VSWITCHD_STOP
AT_CLEANUP
'up 0 0' \
'noflood NO_FLOOD 0' \
'down PORT_DOWN,NO_FLOOD LINK_DOWN' \
- 'flood PORT_DOWN LINK_DOWN'
+ 'flood PORT_DOWN LINK_DOWN' \
+ 'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
+ 'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
+ 'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
+ 'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'up NO_RECV 0' \
+ 'receive 0 0'
do
set $command_config_state
command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
- AT_CHECK([ovs-ofctl -vANY:ANY:WARN mod-port br0 br0 $command])
- AT_CHECK([ovs-ofctl -vANY:ANY:WARN show br0], [0], [stdout])
+ AT_CHECK([ovs-ofctl -vwarn mod-port br0 br0 $command])
+ AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
-OFPT_FEATURES_REPLY: ver:0x1, dpid:fedcba9876543210
+OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:255, n_buffers:256
-features: capabilities:0xc7, actions:0xfff
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
+actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
LOCAL(br0): addr:aa:55:aa:55:00:00
config: $config
state: $state
+ speed: 100 Mbps now, 100 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
done
AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=3
])
-AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3 | ofctl_strip | sort], [0], [dnl
+AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3/-1 | ofctl_strip | sort], [0], [dnl
cookie=0x3, in_port=3 actions=output:0
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3 | STRIP_XIDS], [0], [dnl
+AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3/-1 | STRIP_XIDS], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=1
])
OVS_VSWITCHD_STOP
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - del flows with cookie])
+AT_SETUP([ofproto - mod flow with cookie change (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+OFPST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl -F openflow10 mod-flows br0 cookie=0x2,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=1 actions=output:0
+OFPST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie change (NXM)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F nxm add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=0x2,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=1 actions=output:0
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flows based on cookie mask])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=2,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x1, in_port=2 actions=output:0
+ cookie=0x2, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=0x1/0xff,actions=4])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:4
+ cookie=0x1, in_port=2 actions=output:4
+ cookie=0x2, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flows based on cookie mask with cookie change])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=2,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x1, in_port=2 actions=output:0
+ cookie=0x2, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=1/-1,cookie=4,actions=4])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x2, in_port=3 actions=output:0
+ cookie=0x4, in_port=1 actions=output:4
+ cookie=0x4, in_port=2 actions=output:4
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask==0)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 in_port=1,actions=0])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ in_port=1 actions=output:0
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - mod flow with cookie miss (mask!=0)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=1/1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows with cookies])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3])
+AT_CHECK([ovs-ofctl del-flows br0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+NXST_FLOW reply:
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - del flows based on cookie])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
+AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=0])
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ cookie=0x1, in_port=1 actions=output:0
+ cookie=0x2, in_port=2 actions=output:0
+ cookie=0x3, in_port=3 actions=output:0
+NXST_FLOW reply:
+])
+
+AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3/-1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
cookie=0x1, in_port=1 actions=output:0
cookie=0x2, in_port=2 actions=output:0
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - del flows with cookie mask])
+AT_SETUP([ofproto - del flows based on cookie mask])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=0])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=0])
0: classifier: wild=0x3fffff, max=1000000, active=0
lookup=0, matched=0"
x=1
- while test $x -lt 255; do
+ while test $x -lt 254; do
printf " %d: %-8s: wild=0x3fffff, max=1000000, active=0
lookup=0, matched=0
" $x table$x
x=`expr $x + 1`
- done) > expout
+ done
+ echo " 254: table254: wild=0x3fffff, max=1000000, active=2
+ lookup=0, matched=0") > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
# Change the configuration.
AT_CHECK(
])
# Adding another flow will be refused.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop], [1], [], [stderr])
-AT_CHECK([head -n 1 stderr], [0],
- [OFPT_ERROR (xid=0x1): OFPFMFC_ALL_TABLES_FULL
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
])
# Also a mod-flow that would add a flow will be refused.
AT_CHECK([ovs-ofctl mod-flows br0 in_port=5,actions=drop], [1], [], [stderr])
-AT_CHECK([head -n 1 stderr], [0],
- [OFPT_ERROR (xid=0x1): OFPFMFC_ALL_TABLES_FULL
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
])
# Replacing or modifying an existing flow is allowed.
AT_CHECK([ovs-ofctl add-flow br0 in_port=4,actions=normal])
ovs-ofctl add-flow br0 idle_timeout=${in_port}0,in_port=$in_port,actions=drop
done
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=10,in_port=1 actions=drop
- idle_timeout=20,in_port=2 actions=drop
- idle_timeout=30,in_port=3 actions=drop
- idle_timeout=40,in_port=4 actions=drop
+ idle_timeout=10, in_port=1 actions=drop
+ idle_timeout=20, in_port=2 actions=drop
+ idle_timeout=30, in_port=3 actions=drop
+ idle_timeout=40, in_port=4 actions=drop
NXST_FLOW reply:
])
# Adding another flow will cause the one that expires soonest to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=20,in_port=2 actions=drop
- idle_timeout=30,in_port=3 actions=drop
- idle_timeout=40,in_port=4 actions=drop
+ idle_timeout=20, in_port=2 actions=drop
+ idle_timeout=30, in_port=3 actions=drop
+ idle_timeout=40, in_port=4 actions=drop
in_port=5 actions=drop
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl add-flow br0 in_port=4,actions=normal])
AT_CHECK([ovs-ofctl mod-flows br0 in_port=3,actions=output:1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=30,in_port=3 actions=output:1
+ idle_timeout=30, in_port=3 actions=output:1
in_port=4 actions=NORMAL
in_port=5 actions=drop
in_port=6 actions=drop
# Flows with no timeouts at all cannot be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=7,actions=normal])
AT_CHECK([ovs-ofctl add-flow br0 in_port=8,actions=drop], [1], [], [stderr])
-AT_CHECK([head -n 1 stderr], [0],
- [OFPT_ERROR (xid=0x1): OFPFMFC_ALL_TABLES_FULL
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_ALL_TABLES_FULL
])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
in_port=4 actions=NORMAL
idle_timeout=40 in_port=1 dl_src=00:33:44:55:66:77 actions=drop
EOF
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=10,in_port=2,dl_src=00:44:55:66:77:88 actions=drop
- idle_timeout=20,in_port=1,dl_src=00:11:22:33:44:55 actions=drop
- idle_timeout=30,in_port=1,dl_src=00:22:33:44:55:66 actions=drop
- idle_timeout=40,in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=20, in_port=1,dl_src=00:11:22:33:44:55 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
NXST_FLOW reply:
])
# Adding another flow will cause the one that expires soonest within
# (which is what makes the test interesting):
AT_CHECK([ovs-ofctl add-flow br0 in_port=2,dl_src=00:55:66:77:88:99,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=10,in_port=2,dl_src=00:44:55:66:77:88 actions=drop
- idle_timeout=30,in_port=1,dl_src=00:22:33:44:55:66 actions=drop
- idle_timeout=40,in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=drop
EOF
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=10,in_port=2,dl_src=00:44:55:66:77:88 actions=drop
- idle_timeout=30,in_port=1,dl_src=00:22:33:44:55:66 actions=drop
- idle_timeout=40,in_port=1,dl_src=00:33:44:55:66:77 actions=drop
- idle_timeout=50,in_port=2,dl_src=00:66:77:88:99:aa actions=drop
- idle_timeout=60,in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
- idle_timeout=70,in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
# to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 'idle_timeout=80 in_port=2 dl_src=00:99:aa:bb:cc:dd actions=drop'])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=30,in_port=1,dl_src=00:22:33:44:55:66 actions=drop
- idle_timeout=40,in_port=1,dl_src=00:33:44:55:66:77 actions=drop
- idle_timeout=50,in_port=2,dl_src=00:66:77:88:99:aa actions=drop
- idle_timeout=60,in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
- idle_timeout=70,in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
- idle_timeout=80,in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
+ idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
+ idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
# overall to be evicted.
AT_CHECK([ovs-vsctl set Flow_Table evict flow-limit=4])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
- idle_timeout=60,in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
- idle_timeout=70,in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
- idle_timeout=80,in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+ idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
printf '\n\n--- check_async %d ---\n\n\n' $1
shift
+ ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
: > expout
- # OFPT_PACKET_IN, OFPR_ACTION
+ # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
ovs-ofctl -v packet-out br0 none controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=NONE (via action) data_len=14 (unbuffered)
-priority:0,tunnel:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)"
+priority:0,tunnel:0,metadata:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
+ ovs-ofctl -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_NO_MATCH"; then shift;
+ echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=NONE (via no_match) data_len=14 (unbuffered)
+priority:0,tunnel:0,metadata:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)"
fi
- # OFPT_PACKET_IN, OFPR_INVALID_TTL
+ # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
ovs-ofctl packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=76 in_port=NONE (via invalid_ttl) data_len=76 (unbuffered)
-priority:0,tunnel:0,in_port:0000,tci(0) mac(00:26:b9:8c:b0:f9->00:25:83:df:b4:00) type:0800 proto:17 tos:0 ttl:0 ip(172.17.55.13->172.16.0.2) port(55155->53) udp_csum:8f6d"
+priority:0,tunnel:0,metadata:0,in_port:0000,tci(0) mac(00:26:b9:8c:b0:f9->00:25:83:df:b4:00) type:0800 proto:17 tos:0 ttl:0 ip(172.17.55.13->172.16.0.2) port(55155->53) udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
if test X"$1" = X"OFPPR_ADD"; then shift;
echo >>expout "OFPT_PORT_STATUS: ADD: 1(test): addr:aa:55:aa:55:00:0x
config: PORT_DOWN
- state: LINK_DOWN"
+ state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max"
fi
# OFPT_PORT_STATUS, OFPPR_DELETE
if test X"$1" = X"OFPPR_DELETE"; then shift;
echo >>expout "OFPT_PORT_STATUS: DEL: 1(test): addr:aa:55:aa:55:00:0x
config: PORT_DOWN
- state: LINK_DOWN"
+ state: LINK_DOWN
+ speed: 100 Mbps now, 100 Mbps max"
fi
# OFPT_FLOW_REMOVED, OFPRR_DELETE
AT_FAIL_IF([test X"$1" != X])
ovs-appctl -t ovs-ofctl ofctl/barrier
- echo >>expout "send: OFPT_BARRIER_REQUEST:
-OFPT_BARRIER_REPLY:"
+ echo >>expout "OFPT_BARRIER_REPLY:"
AT_CHECK(
[[sed '
# It's a service connection so initially there should be no async messages.
check_async 1
-# Set miss_send_len to 128, turning on packet-outs for our service connection.
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE
ovs-appctl -t ovs-ofctl ofctl/send 01040028000000020000232000000013000000020000000500000005000000020000000200000005
check_async 5 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE
+# Set controller ID 123.
+ovs-appctl -t ovs-ofctl ofctl/send 01040018000000030000232000000014000000000000007b
+check_async 6 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE
+
+# Restore controller ID 0.
+ovs-appctl -t ovs-ofctl ofctl/send 010400180000000300002320000000140000000000000000
+
# Become master.
ovs-appctl -t ovs-ofctl ofctl/send 0104001400000002000023200000000a00000001
-check_async 6 OFPR_ACTION OFPPR_ADD
+check_async 7 OFPR_ACTION OFPPR_ADD
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
+dnl specified by OpenFlow 1.0) and OFPP_CONTROLLER (used by some
+dnl controllers despite the spec) as meaning a packet that was generated
+dnl by the controller.
+AT_SETUP([ofproto - packet-out from controller])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
+AT_CHECK([ovs-ofctl packet-out br0 none controller '0001020304050010203040501234'])
+AT_CHECK([ovs-ofctl packet-out br0 65533 controller '0001020304050010203040505678'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN: total_len=14 in_port=NONE (via action) data_len=14 (unbuffered)
+priority:0,tunnel:0,metadata:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)
+OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+priority:0,tunnel:0,metadata:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:5678 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks that metadata is encoded in packet_in structures,
+dnl supported by NXAST.
+AT_SETUP([ofproto - packet-out with metadata (NXM)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -P nxm monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with a load action to set some metadata, and forward to controller
+AT_CHECK([ovs-ofctl packet-out br0 none 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), controller' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+NXT_PACKET_IN: total_len=14 in_port=NONE metadata=0xfafafafa5a5a5a5a (via action) data_len=14 (unbuffered)
+priority:0,tunnel:0,metadata:0,in_port:0000,tci(0) mac(00:10:20:30:40:50->00:01:02:03:04:05) type:1234 proto:0 tos:0 ttl:0 ip(0.0.0.0->0.0.0.0)
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow monitoring])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:1
+
+# Start a monitor watching the flow table and check the initial reply.
+ovs-ofctl monitor br0 watch: --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/barrier
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
+ [NXST_FLOW_MONITOR reply:
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:1
+OFPT_BARRIER_REPLY:
+])
+
+# Add, delete, and modify some flows and check the updates.
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=124,actions=output:2
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:5
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,dl_vlan_pcp=0,actions=output:6
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,dl_vlan_pcp=1,actions=output:7
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:8
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,dl_vlan_pcp=0,actions=output:9
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,dl_vlan_pcp=1,actions=output:10
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,actions=output:11
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,dl_vlan_pcp=0,actions=output:12
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,dl_vlan_pcp=1,actions=output:13
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,actions=output:14
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=0,actions=output:15
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=1,actions=output:16
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,actions=output:17
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=0,actions=output:18
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=1,actions=output:19
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,actions=output:20
+ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=0,actions=output:21
+ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=1,actions=output:22
+ovs-ofctl add-flow br0 in_port=0,actions=output:23
+ovs-ofctl mod-flows br0 cookie=5,dl_vlan=123,actions=output:3
+ovs-ofctl del-flows br0 dl_vlan=123
+ovs-ofctl del-flows br0
+ovs-appctl -t ovs-ofctl ofctl/barrier
+sort='
+ # Sorts groups of lines that start with a space, without moving them
+ # past the nearest line that does not start with a space.
+ use warnings;
+ use strict;
+ my @buffer = ();
+ while (<STDIN>) {
+ if (/^ /) {
+ push(@buffer, $_);
+ } else {
+ print $_ foreach sort(@buffer);
+ print $_;
+ @buffer = ();
+ }
+ }
+ print $_ foreach sort(@buffer);
+'
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | perl -e "$sort"], [0],
+[NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:5
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:6
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:7
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:8
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:9
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:10
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,vlan_tci=0x0000 actions=output:11
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=0 actions=output:12
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=1 actions=output:13
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095 actions=output:14
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:15
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:16
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:17
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:18
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:19
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:20
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=0 actions=output:21
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=0 actions=output:23
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
+ event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
+ event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
+ event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
+ event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=DELETED reason=delete table=0 cookie=0 in_port=0 actions=output:23
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:20
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:18
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:19
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095 actions=output:14
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=0 actions=output:12
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=1 actions=output:13
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan_pcp=0 actions=output:21
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
+ event=DELETED reason=delete table=0 cookie=0 in_port=0,vlan_tci=0x0000 actions=output:11
+OFPT_BARRIER_REPLY:
+])
+
+# Check that our own changes are reported as abbreviations.
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ovs-ofctl add-flow br0 in_port=1,actions=output:2
+ovs-ofctl add-flow br0 in_port=2,actions=output:1
+ovs-appctl -t ovs-ofctl ofctl/send 010e004812345678003fffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003000000000000ffffffffffff0000
+ovs-appctl -t ovs-ofctl ofctl/barrier
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
+])
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
+[NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=1 actions=output:2
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=2 actions=output:1
+send: OFPT_FLOW_MOD: DEL priority=0 actions=drop
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ABBREV xid=0x12345678
+OFPT_BARRIER_REPLY:
+])
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow monitoring pause and resume])
+AT_KEYWORDS([monitor])
+
+# The maximum socket receive buffer size is important for this test, which
+# tests behavior when the receive buffer overflows.
+if test -e /proc/sys/net/core/rmem_max; then
+ # Linux
+ rmem_max=`cat /proc/sys/net/core/rmem_max`
+elif rmem_max=`sysctl -n net.inet.tcp.recvbuf_max 2>/dev/null`; then
+ : # FreeBSD
+else
+ # Don't know how to get maximum socket receive buffer on this OS
+ AT_SKIP_IF([:])
+fi
+# Calculate the total amount of queuing: rmem_max in the kernel, 128 kB
+# in ofproto sending userspace (see ofmonitor_flush() in connmgr.c).
+queue_size=`expr $rmem_max + 128 \* 1024`
+echo rmem_max=$rmem_max queue_size=$queue_size
+
+# Each flow update message takes up at least 48 bytes of space in queues
+# and in practice more than that.
+n_msgs=`expr $queue_size / 48`
+echo n_msgs=$n_msgs
+
+OVS_VSWITCHD_START
+
+# Start a monitor watching the flow table, then make it block.
+trap 'kill `cat ovsdb-server.pid ovs-vswitchd.pid ovs-ofctl.pid`' 0
+ovs-ofctl monitor br0 watch: --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/block
+
+# Add $n_msgs flows.
+(echo "in_port=2,actions=output:2"
+perl -e '
+ for ($i = 0; $i < '$n_msgs'; $i++) {
+ print "cookie=1,reg1=$i,actions=drop\n";
+ }
+') > flows.txt
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+# Check that multipart flow dumps work properly:
+AT_CHECK([ovs-ofctl diff-flows br0 flows.txt])
+AT_CHECK([ovs-ofctl add-flow br0 in_port=1,cookie=3,actions=drop])
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=2,cookie=2,actions=output:2])
+AT_CHECK([ovs-ofctl del-flows br0 cookie=1/-1])
+
+ovs-appctl -t ovs-ofctl ofctl/unblock
+ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
+
+# Check that the flow monitor reported the same number of flows
+# added and deleted, but fewer than we actually added and deleted.
+adds=`grep -c 'ADDED.*reg1=' monitor.log`
+deletes=`grep -c 'DELETED.*reg1=' monitor.log`
+echo adds=$adds deletes=$deletes
+AT_CHECK([test $adds -gt 100 && test $adds -lt $n_msgs])
+AT_CHECK([test $adds = $deletes])
+
+# Check that the flow monitor reported everything in the expected order:
+#
+# event=ADDED table=0 cookie=0x1 reg1=0x22
+# ...
+# NXT_FLOW_MONITOR_PAUSED:
+# ...
+# event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
+# ...
+# event=ADDED table=0 cookie=0x3 in_port=1
+# event=MODIFIED table=0 cookie=0x2 in_port=2 actions=output:2
+# NXT_FLOW_MONITOR_RESUMED:
+#
+# except that, between the PAUSED and RESUMED, the order of the ADDED
+# and MODIFIED lines lines depends on hash order, that is, it varies
+# as we change the hash function or change architecture. Therefore,
+# we use a couple of tests below to accept both orders.
+AT_CHECK([ofctl_strip < monitor.log | sed -n -e '
+/reg1=0x22$/p
+/cookie=0x[[23]]/p
+/NXT_FLOW_MONITOR_PAUSED:/p
+/NXT_FLOW_MONITOR_RESUMED:/p
+' > monitor.log.subset])
+AT_CHECK([grep -v MODIFIED monitor.log.subset], [0], [dnl
+ event=ADDED table=0 cookie=0x1 reg1=0x22
+NXT_FLOW_MONITOR_PAUSED:
+ event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
+ event=ADDED table=0 cookie=0x3 in_port=1
+NXT_FLOW_MONITOR_RESUMED:
+])
+AT_CHECK([grep -v ADDED monitor.log.subset], [0], [dnl
+NXT_FLOW_MONITOR_PAUSED:
+ event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
+ event=MODIFIED table=0 cookie=0x2 in_port=2 actions=output:2
+NXT_FLOW_MONITOR_RESUMED:
+])
+
+OVS_VSWITCHD_STOP
AT_CLEANUP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff