classifier: Use array for subtables instead of a list.

[sliver-openvswitch.git] / utilities / ovs-ctl.8

diff --git a/utilities/ovs-ctl.8 b/utilities/ovs-ctl.8
index 04c2930..97294af 100644 (file)
--- a/utilities/ovs-ctl.8
+++ b/utilities/ovs-ctl.8
@@ -69,41 +69,30 @@ bridge module and tries loading the Open vSwitch kernel module again.
 (This is because the Open vSwitch kernel module cannot coexist with
 the Linux bridge module before 2.6.37.)
 .
-.IP 2.
-If \fB\-\-brcompat\fR was specified, loads the Open vSwitch bridge
-compatibility module.
-.
 .PP
 The \fBstart\fR command skips the following steps if
 \fBovsdb\-server\fR is already running:
-.IP 3.
+.IP 2.
 If the Open vSwitch database file does not exist, it creates it.
 If the database does exist, but it has an obsolete version, it
 upgrades it to the latest schema.
 .
-.IP 4.
+.IP 3.
 Starts \fBovsdb-server\fR.
 .
-.IP 5.
+.IP 4.
 Initializes a few values inside the database.
 .
-.IP 6.
+.IP 5.
 If the \fB\-\-delete\-bridges\fR option was used, deletes all of the
 bridges from the database.
 .
 .PP
 The \fBstart\fR command skips the following step if
 \fBovs\-vswitchd\fR is already running:
-.IP 7.
+.IP 6.
 Starts \fBovs\-vswitchd\fR.
 .
-.PP
-The \fBstart\fR command skips the following step if
-\fBovs\-brcompatd\fR is already running or if \fB\-\-brcompat\fR is
-not specified:
-.IP 8.
-Starts \fBovs\-brcompatd\fR.
-.
 .SS "Options"
 .PP
 Several command-line options influence the \fBstart\fR command's
@@ -179,13 +168,11 @@ suppresses that behavior.
 .
 .IP "\fB\-\-ovsdb\-server\-priority=\fIniceness\fR"
 .IQ "\fB\-\-ovs\-vswitchd\-priority=\fIniceness\fR"
-.IQ "\fB\-\-ovs\-brcompatd\-priority=\fIniceness\fR"
 Sets the \fBnice\fR(1) level used for each daemon.  All of them
 default to \fB\-10\fR.
 .
 .IP "\fB\-\-ovsdb\-server\-wrapper=\fIwrapper\fR"
 .IQ "\fB\-\-ovs\-vswitchd\-wrapper=\fIwrapper\fR"
-.IQ "\fB\-\-ovs\-brcompatd\-wrapper=\fIwrapper\fR"
 .
 Configures the specified daemon to run under \fIwrapper\fR, which is
 one of the following:
@@ -208,7 +195,7 @@ By default, no wrapper is used.
 .
 .IP
 Each of the wrappers can expose bugs in Open vSwitch that lead to
-incorrect operation, including crashes.  The \fBvalgring\fR and
+incorrect operation, including crashes.  The \fBvalgrind\fR and
 \fBstrace\fR wrappers greatly slow daemon operations so they should
 not be used in production.  They also produce voluminous logs that can
 quickly fill small disk partitions.  The \fBglibc\fR wrapper is less
@@ -238,11 +225,6 @@ taken as relative to \fIdbdir\fR.
 .SH "The ``stop'' command"
 .
 .PP
-The \fBstop\fR command shuts down Open vSwitch.  It kills any running
-\fBovs\-brcompatd\fR, \fBovs\-vswitchd\fR, or \fBovsdb\-server\fR
-daemons and waits for them to terminate.
-.
-.PP
 The \fBstop\fR command does not unload the Open vSwitch kernel
 modules.
 .
@@ -263,16 +245,14 @@ individual bridge.
 .PP
 The \fBstatus\fR command checks whether the OVS daemons
 \fBovs-vswitchd\fR and \fBovsdb\-server\fR are running and prints
-messages with that information.  If \fB\-\-brcompat\fR is specified,
-it also checks for \fBovs\-brcompatd\fR.  It exits with status 0 if
+messages with that information.  It exits with status 0 if
 the daemons are running, 1 otherwise.
 .
 .SH "The ``version'' command"
 .
 .PP
 The \fBversion\fR command runs \fBovsdb\-server \-\-version\fR and
-\fBovs\-vswitchd \-\-version\fR.  If \fB\-\-brcompat\fR is specified,
-it also runs \fBovs\-brcompatd \-\-version\fR.
+\fBovs\-vswitchd \-\-version\fR.
 .
 .SH "The ``force\-reload\-kmod'' command"
 .
@@ -304,8 +284,7 @@ compatibility module if it is loaded).
 .
 .IP 6.
 Starts OVS back up, as if by a call to \fBovs\-ctl start\fR.  This
-reloads the kernel module, restarts the OVS daemons (including
-\fBovs\-brcompatd\fR, if \fB\-\-brcompat\fR is specified) and finally
+reloads the kernel module, restarts the OVS daemons and finally
 restores the saved Openflow flows.
 .
 .IP 7.
@@ -336,8 +315,7 @@ from other errors that may occur when running the \fBstart\fR command.
 .
 .PP
 By default the \fBload\-kmod\fR command attempts to load the
-openvswitch kernel module. If the \fB\-\-brcompat\fR option is
-specified then the brcompat kernel module is also loaded.
+openvswitch kernel module.
 .
 .SH "The ``enable\-protocol'' command"
 .
@@ -390,16 +368,6 @@ Prints a usage message and exits successfully.
 In addition to the options listed for each command above, this option
 controls the behavior of several of \fBovs\-ctl\fR's commands.
 .
-.IP "\fB\-\-brcompat\fR"
-By default, \fBovs\-ctl\fR does not load the Open vSwitch bridge
-compatibility module and does not start or check the status or report
-the version of the \fBovs\-brcompatd\fR daemon.  This option enables
-all of those behaviors.
-.
-.IP
-The \fBstop\fR command always stops \fBovs\-brcompatd\fR, if it is
-running, regardless of this option.
-.
 .SH "EXIT STATUS"
 .
 \fBovs\-ctl\fR exits with status 0 on success and nonzero on failure.
@@ -432,7 +400,7 @@ for the other Open vSwitch programs that it runs.
 .
 \fBovs\-ctl\fR uses the following files:
 .
-.IP "\fBovs\-lib.sh"
+.IP "\fBovs\-lib"
 Shell function library used internally by \fBovs\-ctl\fR.  It must be
 installed in the same directory as \fBovs\-ctl\fR.
 .