Merge "master" into "wdp".
[sliver-openvswitch.git] / utilities / ovs-ofctl.8.in
index c12b5f1..0048851 100644 (file)
@@ -338,6 +338,22 @@ as a decimal number between 0 and 255, inclusive.
 When \fBdl_type\fR and \fBnw_proto\fR take other values, the values of
 these settings are ignored (see \fBFlow Syntax\fR above).
 .
+.IP \fBtable=\fInumber\fR
+If specified, limits the flow manipulation and flow dump commands to 
+only apply to the table with the given \fInumber\fR.  
+\fInumber\fR is a number between 0 and 31, inclusive.
+.
+If this field is not specified, for \fBadd-flow\fR, \fBadd-flows\fR, 
+\fBmod-flows\fR and \fBdel-flows\fR commands, the switch will choose
+the table for these commands to operate on; for \fBdump-flows\fR and
+\fBdump-aggregate\fR commands, statistics are gathered about flows 
+from all tables.
+.IP
+When this field is specified in \fBadd-flow\fR, \fBadd-flows\fR, 
+\fBmod-flows\fR and \fBdel-flows\fR commands, it will activate a 
+Nicira extension to OpenFlow, which as of this writing is only 
+known to be implemented by Open vSwitch.
+.
 .PP
 The following shorthand notations are also available:
 .
@@ -469,6 +485,16 @@ Ethernet header.
 This is useful because OpenFlow does not provide a way to match on the
 Ethernet addresses inside ARP packets, so there is no other way to
 drop spoofed ARPs other than sending every ARP packet to a controller.
+.
+.IP \fBset_queue\fB:\fIqueue\fR
+Sets the queue that should be used to \fIqueue\fR when packets are
+output.  The number of supported queues depends on the switch; some
+OpenFlow implementations do not support queuing at all.
+.
+.IP \fBpop_queue\fR
+Restores the queue to the value it was before any \fBset_queue\fR
+actions were applied.
+.
 .RE
 .
 .IP
@@ -520,17 +546,6 @@ and \fBdel\-flows\fR commands support one additional optional field:
 \fBout_port=\fIport\fR
 If set, a matching flow must include an output action to \fIport\fR.
 .
-.PP
-The \fBdump\-flows\fR and \fBdump\-aggregate\fR commands support an
-additional optional field:
-.
-.IP \fBtable=\fInumber\fR
-If specified, limits the flows about which statistics are gathered to
-those in the table with the given \fInumber\fR.  Tables are numbered
-as shown by the \fBdump\-tables\fR command.
-.
-If this field is not specified, or if \fInumber\fR is given as
-\fB255\fR, statistics are gathered about flows from all tables.
 .
 .SS "Table Entry Output"
 .