information on its flow tables and ports.
.
.TP
-\fBstatus \fIswitch\fR [\fIkey\fR]
-Prints to the console a series of key-value pairs that report the
-status of \fIswitch\fR. If \fIkey\fR is specified, only the key-value
-pairs whose key names begin with \fIkey\fR are printed. If \fIkey\fR is
-omitted, all key-value pairs are printed.
-.
-.TP
\fBdump\-tables \fIswitch\fR
Prints to the console statistics for each of the flow tables used by
\fIswitch\fR.
queues on \fIport\fR; if only \fIport\fR is omitted, then statistics
are printed for \fIqueue\fR on every port where it exists.
.
-.TP
-\fBadd\-flow \fIswitch flow\fR
-Add the flow entry as described by \fIflow\fR to the \fIswitch\fR's
-tables. The flow entry is in the format described in \fBFlow Syntax\fR,
-below.
-.
-.TP
-\fBadd\-flows \fIswitch file\fR
-Add flow entries as described in \fIfile\fR to \fIswitch\fR's
-tables. Each line in \fIfile\fR is a flow entry in the format
-described in \fBFlow Syntax\fR, below.
-.
-.TP
-\fBmod\-flows \fIswitch flow\fR
-Modify the actions in entries from the \fIswitch\fR's tables
-that match \fIflow\fR. When invoked with the \fB\-\-strict\fR option,
-wildcards are not treated as active for matching purposes. See
-\fBFlow Syntax\fR, below, for the syntax of \fIflows\fR.
+.SS "OpenFlow Switch Flow Table Commands"
+.
+These commands manage the flow table in an OpenFlow switch. In each
+case, \fIflow\fR specifies a flow entry in the format described in
+\fBFlow Syntax\fR, below, and \fIfile\fR is a text file that contains
+zero or more flows in the same syntax, one per line.
+.
+.IP "\fBadd\-flow \fIswitch flow\fR"
+.IQ "\fBadd\-flow \fIswitch \fB\- < \fIfile\fR"
+.IQ "\fBadd\-flows \fIswitch file\fR"
+Add each flow entry to \fIswitch\fR's tables.
+.
+.IP "[\fB\-\-strict\fR] \fBmod\-flows \fIswitch flow\fR"
+.IQ "[\fB\-\-strict\fR] \fBmod\-flows \fIswitch \fB\- < \fIfile\fR"
+Modify the actions in entries from \fIswitch\fR's tables that match
+the specified flows. With \fB\-\-strict\fR, wildcards are not treated
+as active for matching purposes.
+.
+.IP "\fBdel\-flows \fIswitch\fR"
+.IQ "[\fB\-\-strict\fR] \fBdel\-flows \fIswitch \fR[\fIflow\fR]"
+.IQ "[\fB\-\-strict\fR] \fBdel\-flows \fIswitch \fB\- < \fIfile\fR"
+Deletes entries from \fIswitch\fR's flow table. With only a
+\fIswitch\fR argument, deletes all flows. Otherwise, deletes flow
+entries that match the specified flows. With \fB\-\-strict\fR,
+wildcards are not treated as active for matching purposes.
+.
+.IP "\fBreplace\-flows \fIswitch file\fR"
+Reads flow entries from \fIfile\fR (or \fBstdin\fR if \fIfile\fR is
+\fB\-\fR) and queries the flow table from \fIswitch\fR. Then it fixes
+up any differences, adding flows from \fIflow\fR that are missing on
+\fIswitch\fR, deleting flows from \fIswitch\fR that are not in
+\fIfile\fR, and updating flows in \fIswitch\fR whose actions, cookie,
+or timeouts differ in \fIfile\fR.
+.
+.IP "\fBdiff\-flows \fIsource1 source2\fR"
+Reads flow entries from \fIsource1\fR and \fIsource2\fR and prints the
+differences. A flow that is in \fIsource1\fR but not in \fIsource2\fR
+is printed preceded by a \fB\-\fR, and a flow that is in \fIsource2\fR
+but not in \fIsource1\fR is printed preceded by a \fB+\fR. If a flow
+exists in both \fIsource1\fR and \fIsource2\fR with different actions,
+cookie, or timeouts, then both versions are printed preceded by
+\fB\-\fR and \fB+\fR, respectively.
+.IP
+\fIsource1\fR and \fIsource2\fR may each name a file or a switch. If
+a name begins with \fB/\fR or \fB.\fR, then it is considered to be a
+file name. A name that contains \fB:\fR is considered to be a switch.
+Otherwise, it is a file if a file by that name exists, a switch if
+not.
+.IP
+For this command, an exit status of 0 means that no differences were
+found, 1 means that an error occurred, and 2 means that some
+differences were found.
.
-.TP
-\fBdel\-flows \fIswitch \fR[\fIflow\fR]
-Deletes entries from the \fIswitch\fR's tables that match
-\fIflow\fR. When invoked with the \fB\-\-strict\fR option, wildcards are
-not treated as active for matching purposes. If \fIflow\fR is
-omitted and the \fB\-\-strict\fR option is not used, all flows in the
-switch's tables are removed. See \fBFlow Syntax\fR, below, for the
-syntax of \fIflows\fR.
+.SS "OpenFlow Switch Monitoring Commands"
.
.IP "\fBsnoop \fIswitch\fR"
Connects to \fIswitch\fR and prints to the console all OpenFlow
the configured controller is disconnected, no traffic is sent, so
monitoring will not show any traffic.
.
-.IQ "\fBmonitor \fIswitch\fR [\fImiss-len\fR]"
+.IP "\fBmonitor \fIswitch\fR [\fImiss-len\fR]"
Connects to \fIswitch\fR and prints to the console all OpenFlow
messages received. Usually, \fIswitch\fR should specify a connection
named on \fBovs\-openflowd\fR(8)'s \fB\-l\fR or \fB\-\-listen\fR command line
.IP \fBnw_proto=\fIproto\fR
When \fBip\fR or \fBdl_type=0x0800\fR is specified, matches IP
protocol type \fIproto\fR, which is specified as a decimal number
-between 0 and 255, inclusive (e.g. 6 to match TCP packets).
+between 0 and 255, inclusive (e.g. 1 to match ICMP packets or 6 to match
+TCP packets).
+.IP
+When \fBipv6\fR or \fBdl_type=0x86dd\fR is specified, matches IPv6
+header type \fIproto\fR, which is specified as a decimal number between
+0 and 255, inclusive (e.g. 58 to match ICMPv6 packets or 6 to match
+TCP). The header type is the terminal header as described in the
+\fBDESIGN\fR document.
.IP
When \fBarp\fR or \fBdl_type=0x0806\fR is specified, matches the lower
8 bits of the ARP opcode. ARP opcodes greater than 255 are treated as
0.
.IP
-When \fBdl_type\fR is wildcarded or set to a value other than 0x0800
-or 0x0806, the value of \fBnw_proto\fR is ignored (see \fBFlow
+When \fBdl_type\fR is wildcarded or set to a value other than 0x0800,
+0x0806, or 0x86dd, the value of \fBnw_proto\fR is ignored (see \fBFlow
Syntax\fR above).
.
.IP \fBnw_tos=\fItos\fR
-Matches IP ToS/DSCP field \fItos\fR, which is specified as a decimal
-number between 0 and 255, inclusive. Note that the two lower reserved
-bits are ignored for matching purposes.
+Matches IP ToS/DSCP or IPv6 traffic class field \fItos\fR, which is
+specified as a decimal number between 0 and 255, inclusive. Note that
+the two lower reserved bits are ignored for matching purposes.
.IP
-The value of \fBnw_tos\fR is ignored unless \fBdl_type=0x0800\fR,
-\fBip\fR, \fBicmp\fR, \fBtcp\fR, or \fBudp\fR is also specified (see
-\fBFlow Syntax\fR above).
+When \fBdl_type\fR is wildcarded or set to a value other than 0x0800,
+0x0806, or 0x86dd, the value of \fBnw_tos\fR is ignored (see \fBFlow
+Syntax\fR above).
.
.IP \fBtp_src=\fIport\fR
.IQ \fBtp_dst=\fIport\fR
.
.IP \fBicmp_type=\fItype\fR
.IQ \fBicmp_code=\fIcode\fR
-When \fBdl_type\fR and \fBnw_proto\fR specify ICMP, \fItype\fR matches
-the ICMP type and \fIcode\fR matches the ICMP code. Each is specified
-as a decimal number between 0 and 255, inclusive.
+When \fBdl_type\fR and \fBnw_proto\fR specify ICMP or ICMPv6, \fItype\fR
+matches the ICMP type and \fIcode\fR matches the ICMP code. Each is
+specified as a decimal number between 0 and 255, inclusive.
.IP
When \fBdl_type\fR and \fBnw_proto\fR take other values, the values of
these settings are ignored (see \fBFlow Syntax\fR above).
.
+.IP \fBtable=\fInumber\fR
+If specified, limits the flow manipulation and flow dump commands to
+only apply to the table with the given \fInumber\fR.
+\fInumber\fR is a number between 0 and 254, inclusive.
+.
+Behavior varies if \fBtable\fR is not specified. For flow table
+modification commands without \fB\-\-strict\fR, the switch will choose
+the table for these commands to operate on. For flow table
+modification commands with \fB\-\-strict\fR, the command will operate
+on any single matching flow in any table; it will do nothing if there
+are matches in more than one table. The \fBdump-flows\fR and
+\fBdump-aggregate\fR commands will gather statistics about flows from
+all tables.
+.IP
+When this field is specified in \fBadd-flow\fR, \fBadd-flows\fR,
+\fBmod-flows\fR and \fBdel-flows\fR commands, it activates a Nicira
+extension to OpenFlow, which as of this writing is only known to be
+implemented by Open vSwitch.
+.
+.PP
+The following shorthand notations are also available:
+.
+.IP \fBip\fR
+Same as \fBdl_type=0x0800\fR.
+.
+.IP \fBicmp\fR
+Same as \fBdl_type=0x0800,nw_proto=1\fR.
+.
+.IP \fBtcp\fR
+Same as \fBdl_type=0x0800,nw_proto=6\fR.
+.
+.IP \fBudp\fR
+Same as \fBdl_type=0x0800,nw_proto=17\fR.
+.
+.IP \fBarp\fR
+Same as \fBdl_type=0x0806\fR.
+.
.PP
The following field assignments require support for the NXM (Nicira
Extended Match) extension to OpenFlow. When one of these is specified,
the source and target hardware address, respectively. An address is
specified as 6 pairs of hexadecimal digits delimited by colons.
.
+.IP \fBipv6_src=\fIipv6\fR[\fB/\fInetmask\fR]
+.IQ \fBipv6_dst=\fIipv6\fR[\fB/\fInetmask\fR]
+When \fBdl_type\fR is 0x86dd (possibly via shorthand, e.g., \fBipv6\fR
+or \fBtcp6\fR), matches IPv6 source (or destination) address \fIipv6\fR,
+which may be specified as defined in RFC 2373. The preferred format is
+\fIx\fB:\fIx\fB:\fIx\fB:\fIx\fB:\fIx\fB:\fIx\fB:\fIx\fB:\fIx\fR, where
+\fIx\fR are the hexadecimal values of the eight 16-bit pieces of the
+address. A single instance of \fB::\fR may be used to indicate multiple
+groups of 16-bits of zeros. The optional \fInetmask\fR allows
+restricting a match to an IPv6 address prefix. A netmask is specified
+as a CIDR block (e.g. \fB2001:db8:3c4d:1::/64\fR).
+.
+.IP \fBnd_target=\fIipv6\fR
+When \fBdl_type\fR, \fBnw_proto\fR, and \fBicmp_type\fR specify
+IPv6 Neighbor Discovery (ICMPv6 type 135 or 136), matches the target address
+\fIipv6\fR. \fIipv6\fR is in the same format described earlier for the
+\fBipv6_src\fR and \fBipv6_dst\fR fields.
+.
+.IP \fBnd_sll=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
+When \fBdl_type\fR, \fBnw_proto\fR, and \fBicmp_type\fR specify IPv6
+Neighbor Solicitation (ICMPv6 type 135), matches the source link\-layer
+address option. An address is specified as 6 pairs of hexadecimal
+digits delimited by colons.
+.
+.IP \fBnd_tll=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
+When \fBdl_type\fR, \fBnw_proto\fR, and \fBicmp_type\fR specify IPv6
+Neighbor Advertisement (ICMPv6 type 136), matches the target link\-layer
+address option. An address is specified as 6 pairs of hexadecimal
+digits delimited by colons.
+.
.IP \fBtun_id=\fItunnel-id\fR[\fB/\fImask\fR]
Matches tunnel identifier \fItunnel-id\fR. Only packets that arrive
over a tunnel that carries a key (e.g. GRE with the RFC 2890 key
to 0. Only explicit Nicira extension actions change register values.
.
.PP
-The following shorthand notations are also available:
+Defining IPv6 flows (those with \fBdl_type\fR equal to 0x86dd) requires
+support for NXM. The following shorthand notations are available for
+IPv6-related flows:
.
-.IP \fBip\fR
-Same as \fBdl_type=0x0800\fR.
+.IP \fBipv6\fR
+Same as \fBdl_type=0x86dd\fR.
.
-.IP \fBicmp\fR
-Same as \fBdl_type=0x0800,nw_proto=1\fR.
-.
-.IP \fBtcp\fR
-Same as \fBdl_type=0x0800,nw_proto=6\fR.
+.IP \fBtcp6\fR
+Same as \fBdl_type=0x86dd,nw_proto=6\fR.
.
-.IP \fBudp\fR
-Same as \fBdl_type=0x0800,nw_proto=17\fR.
+.IP \fBudp6\fR
+Same as \fBdl_type=0x86dd,nw_proto=17\fR.
.
-.IP \fBarp\fR
-Same as \fBdl_type=0x0806\fR.
+.IP \fBicmp6\fR
+Same as \fBdl_type=0x86dd,nw_proto=58\fR.
.
.PP
The \fBadd\-flow\fR and \fBadd\-flows\fR commands require an additional
the \fBiter_hash\fR algorithm uses \fIarg\fR.
.IP
Refer to \fBnicira\-ext.h\fR for more details.
+.
+.IP "\fBautopath(\fIid\fB, \fIdst\fB[\fIstart\fB..\fIend\fB])\fR"
+Given \fIid\fR, chooses an OpenFlow port and populates it in
+\fIdst\fB[\fIstart\fB..\fIend\fB]\fR, which must be an NXM register as
+described above.
+.IP
+Currently, \fIid\fR should be the OpenFlow port number of an interface on the
+bridge. If it isn't then \fIdst\fB[\fIstart\fB..\fIend\fB]\fR will be
+populated with the OpenFlow port "none". If \fIid\fR is a member of a bond,
+the normal bond selection logic will be used to choose the destination port.
+Otherwise, the register will be populated with \fIid\fR itself.
+.IP
+Refer to \fBnicira\-ext.h\fR for more details.
.RE
.
.IP
The \fBdump\-flows\fR and \fBdump\-aggregate\fR commands support an
additional optional field:
.
-.IP \fBtable=\fInumber\fR
-If specified, limits the flows about which statistics are gathered to
-those in the table with the given \fInumber\fR. Tables are numbered
-as shown by the \fBdump\-tables\fR command.
-.
-If this field is not specified, or if \fInumber\fR is given as
-\fB255\fR, statistics are gathered about flows from all tables.
-.
.SS "Table Entry Output"
.
The \fBdump\-tables\fR and \fBdump\-aggregate\fR commands print information
This is the standard OpenFlow 1.0 flow format. It should be supported
by all OpenFlow switches.
.
-.IP "\fBtun_id_from_cookie\fR"
-This Nicira extension to OpenFlow adds minimal and limited support for
-\fBtun_id\fR, but it does not support any other Nicira flow
-extensions. (This flow format is deprecated.)
-.
.IP "\fBnxm\fR (Nicira Extended Match)"
This Nicira extension to OpenFlow is flexible and extensible. It
supports all of the Nicira flow extensions, such as \fBtun_id\fR and