utilites: rename ovs-lib.sh to ovs-lib

[sliver-openvswitch.git] / utilities / ovs-ofctl.8.in

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index 007b54a..17b445d 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -81,6 +81,13 @@ system.
 Disables the interface.  This is equivalent to ``ifconfig down'' on a Unix
 system.
 .
+.IP \fBforward\fR
+Allows forwarding of traffic on this interface.  This is the default posture
+for all ports.
+.
+.IP \fBnoforward\fR
+Disallows forwarding of traffic on this interface.
+.
 .IP \fBflood\fR
 When a \fIflood\fR action is specified, traffic will be sent out this
 interface.  This is the default posture for monitored ports.
@@ -404,9 +411,26 @@ Matches IP ToS/DSCP or IPv6 traffic class field \fItos\fR, which is
 specified as a decimal number between 0 and 255, inclusive.  Note that
 the two lower reserved bits are ignored for matching purposes.
 .IP
-When \fBdl_type\fR is wildcarded or set to a value other than 0x0800,
-0x0806, or 0x86dd, the value of \fBnw_tos\fR is ignored (see \fBFlow
-Syntax\fR above).
+When \fBdl_type\fR is wildcarded or set to a value other than 0x0800 or
+0x86dd, the value of \fBnw_tos\fR is ignored (see \fBFlow Syntax\fR
+above).
+.
+.IP \fBnw_ecn=\fIecn\fR
+Matches \fIecn\fR bits in IP ToS or IPv6 traffic class fields, which is
+specified as a decimal number between 0 and 3, inclusive.
+.IP
+When \fBdl_type\fR is wildcarded or set to a value other than 0x0800 or
+0x86dd, the value of \fBnw_ecn\fR is ignored (see \fBFlow Syntax\fR
+above).
+.
+.IP \fBnw_ttl=\fIttl\fR
+Matches IP TTL or IPv6 hop limit value \fIttl\fR, which is
+specified as a decimal number between 0 and 255, inclusive.
+.IP
+When \fBdl_type\fR is wildcarded or set to a value other than 0x0800 or
+0x86dd, the value of \fBnw_ttl\fR is ignored (see \fBFlow Syntax\fR
+above).
+.IP
 .
 .IP \fBtp_src=\fIport\fR
 .IQ \fBtp_dst=\fIport\fR
@@ -430,10 +454,10 @@ these settings are ignored (see \fBFlow Syntax\fR above).
 .
 .IP \fBtable=\fInumber\fR
 If specified, limits the flow manipulation and flow dump commands to
-only apply to the table with the given \fInumber\fR.
-\fInumber\fR is a number between 0 and 254, inclusive.
+only apply to the table with the given \fInumber\fR between 0 and 254.
 .
-Behavior varies if \fBtable\fR is not specified.  For flow table
+Behavior varies if \fBtable\fR is not specified (equivalent to
+specifying 255 as \fInumber\fR).  For flow table
 modification commands without \fB\-\-strict\fR, the switch will choose
 the table for these commands to operate on.  For flow table
 modification commands with \fB\-\-strict\fR, the command will operate
@@ -548,6 +572,10 @@ groups of 16-bits of zeros.  The optional \fInetmask\fR allows
 restricting a match to an IPv6 address prefix.  A netmask is specified
 as a CIDR block (e.g. \fB2001:db8:3c4d:1::/64\fR).
 .
+.IP \fBipv6_label=\fIlabel\fR
+When \fBdl_type\fR is 0x86dd (possibly via shorthand, e.g., \fBipv6\fR
+or \fBtcp6\fR), matches IPv6 flow label \fIlabel\fR.
+.
 .IP \fBnd_target=\fIipv6\fR
 When \fBdl_type\fR, \fBnw_proto\fR, and \fBicmp_type\fR specify
 IPv6 Neighbor Discovery (ICMPv6 type 135 or 136), matches the target address