the configured controller is disconnected, no traffic is sent, so
monitoring will not show any traffic.
.
-.IP "\fBmonitor \fIswitch\fR [\fImiss-len\fR] [\fIinvalid_ttl\fR]"
+.IP "\fBmonitor \fIswitch\fR [\fImiss-len\fR] [\fBinvalid_ttl\fR]"
Connects to \fIswitch\fR and prints to the console all OpenFlow
messages received. Usually, \fIswitch\fR should specify the name of a
bridge in the \fBovs\-vswitchd\fR database.
.IP
If \fBinvalid_ttl\fR is passed, \fBovs\-ofctl\fR sends an OpenFlow ``set
configuration'' message at connection setup time that requests
-\fIINVALID_TTL_TO_CONTROLLER\fR, so that \fBovs\-ofctl monitor\fR can
-receive ``packets-in'' messages when TTL reaches zero on \fBdec_ttl\fR action.
+\fBINVALID_TTL_TO_CONTROLLER\fR, so that \fBovs\-ofctl monitor\fR can
+receive ``packet-in'' messages when TTL reaches zero on \fBdec_ttl\fR action.
.IP
This command may be useful for debugging switch or controller
\fInetmask\fR allows restricting a match to an IPv4 address prefix.
The netmask may be specified as a dotted quad
(e.g. \fB192.168.1.0/255.255.255.0\fR) or as a CIDR block
-(e.g. \fB192.168.1.0/24\fR).
+(e.g. \fB192.168.1.0/24\fR). Open vSwitch 1.8 and later support
+arbitrary dotted quad masks; earlier versions support only CIDR masks,
+that is, the dotted quads that are equivalent to some CIDR block.
.IP
When \fBdl_type=0x0806\fR or \fBarp\fR is specified, matches the
\fBar_spa\fR or \fBar_tpa\fR field, respectively, in ARP packets for
address. A single instance of \fB::\fR may be used to indicate multiple
groups of 16-bits of zeros. The optional \fInetmask\fR allows
restricting a match to an IPv6 address prefix. A netmask is specified
-as a CIDR block (e.g. \fB2001:db8:3c4d:1::/64\fR).
+as an IPv6 address (e.g. \fB2001:db8:3c4d:1::/ffff:ffff:ffff:ffff::\fR)
+or a CIDR block (e.g. \fB2001:db8:3c4d:1::/64\fR). Open vSwitch 1.8
+and later support arbitrary masks; earlier versions support only CIDR
+masks, that is, CIDR block and IPv6 addresses that are equivalent to
+CIDR blocks.
.
.IP \fBipv6_label=\fIlabel\fR
When \fBdl_type\fR is 0x86dd (possibly via shorthand, e.g., \fBipv6\fR