-.TH ovs\-ofctl 8 "March 2009" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-ofctl 8 "June 2009" "Open vSwitch" "Open vSwitch Manual"
.ds PN ovs\-ofctl
.SH NAME
\fBmonitor \fIswitch\fR [\fImiss-len\fR [\fIsend-exp]]
Connects to \fIswitch\fR and prints to the console all OpenFlow
messages received. Usually, \fIswitch\fR should specify a connection
-named on \fBsecchan\fR(8)'s \fB-l\fR or \fB--listen\fR command line
+named on \fBovs\-openflowd\fR(8)'s \fB-l\fR or \fB--listen\fR command line
option.
If \fImiss-len\fR is provided, \fBovs\-ofctl\fR sends an OpenFlow ``set
This command may be useful for debugging switch or controller
implementations.
-.TP
-\fBexecute \fIswitch command \fR[\fIarg\fR...]
-Sends a request to \fIswitch\fR to execute \fIcommand\fR along with
-each \fIarg\fR, if any, then waits for the command to complete and
-reports its completion status on \fBstderr\fR and its output, if any,
-on \fBstdout\fR. The set of available commands and their argument is
-switch-dependent. (This command uses a Nicira extension to OpenFlow
-that may not be available on all switches.)
-
.SS "OpenFlow Switch and Controller Commands"
The following commands, like those in the previous section, may be
displayed by \fBovs\-ofctl show\fR.
.IP \fBdl_vlan=\fIvlan\fR
-Matches IEEE 802.1q virtual LAN tag \fIvlan\fR. Specify \fB0xffff\fR
-as \fIvlan\fR to match packets that are not tagged with a virtual LAN;
+Matches IEEE 802.1q Virtual LAN tag \fIvlan\fR. Specify \fB0xffff\fR
+as \fIvlan\fR to match packets that are not tagged with a Virtual LAN;
otherwise, specify a number between 0 and 4095, inclusive, as the
12-bit VLAN ID to match.
.IP \fBlocal\fR
Outputs the packet on the ``local port,'' which corresponds to the
\fBof\fIn\fR network device (see \fBCONTACTING THE CONTROLLER\fR in
-\fBsecchan\fR(8) for information on the \fBof\fIn\fR network device).
+\fBovs\-openflowd\fR(8) for information on the \fBof\fIn\fR network device).
.IP \fBdrop\fR
Discards the packet, so no further processing or forwarding takes place.
.IP \fBmod_dl_dst\fB:\fImac\fR
Sets the destination Ethernet address to \fImac\fR.
+
+.IP \fBmod_nw_src\fB:\fIip\fR
+Sets the IPv4 source address to \fIip\fR.
+
+.IP \fBmod_nw_dst\fB:\fIip\fR
+Sets the IPv4 destination address to \fIip\fR.
+
+.IP \fBmod_tp_src\fB:\fIport\fR
+Sets the TCP or UDP source port to \fIport\fR.
+
+.IP \fBmod_tp_dst\fB:\fIport\fR
+Sets the TCP or UDP destination port to \fIport\fR.
.RE
.IP
host has been configured to listen for management connections on a
Unix domain socket named \fB@RUNDIR@/openflow.sock\fR, e.g. by
specifying \fB--listen=punix:@RUNDIR@/openflow.sock\fR on the
-\fBsecchan\fR(8) command line.
+\fBovs\-openflowd\fR(8) command line.
.TP
\fBovs\-ofctl dump-tables unix:@RUNDIR@/openflow.sock\fR