. ns
. IP "\\$1"
..
-.TH ovs\-ofctl 8 "January 2011" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-ofctl 8 "@VERSION@" "Open vSwitch" "Open vSwitch Manual"
.ds PN ovs\-ofctl
.
.SH NAME
program is a command line tool for monitoring and administering
OpenFlow switches. It can also show the current state of an OpenFlow
switch, including features, configuration, and table entries.
+It should work with any OpenFlow switch, not just Open vSwitch.
.
.SS "OpenFlow Switch Management Commands"
.PP
The following field assignments describe how a flow matches a packet.
If any of these assignments is omitted from the flow syntax, the field
is treated as a wildcard; thus, if all of them are omitted, the
-resulting flow matches all packets. The string \fB*\fR or \fBANY\fR
-may be specified to explicitly mark any of these fields as a wildcard.
+resulting flow matches all packets. The string \fB*\fR may be specified
+to explicitly mark any of these fields as a wildcard.
(\fB*\fR should be quoted to protect it from shell expansion.)
.
.IP \fBin_port=\fIport\fR
\fBar_spa\fR or \fBar_tpa\fR field, respectively, in ARP packets for
IPv4 and Ethernet.
.IP
-When \fBdl_type\fR is wildcarded or set to a value other than 0x0800
-or 0x0806, the values of \fBnw_src\fR and \fBnw_dst\fR are ignored
+When \fBdl_type=0x8035\fR or \fBrarp\fR is specified, matches the
+\fBar_spa\fR or \fBar_tpa\fR field, respectively, in RARP packets for
+IPv4 and Ethernet.
+.IP
+When \fBdl_type\fR is wildcarded or set to a value other than 0x0800,
+0x0806, or 0x8035, the values of \fBnw_src\fR and \fBnw_dst\fR are ignored
(see \fBFlow Syntax\fR above).
.
.IP \fBnw_proto=\fIproto\fR
8 bits of the ARP opcode. ARP opcodes greater than 255 are treated as
0.
.IP
+When \fBrarp\fR or \fBdl_type=0x8035\fR is specified, matches the lower
+8 bits of the ARP opcode. ARP opcodes greater than 255 are treated as
+0.
+.IP
When \fBdl_type\fR is wildcarded or set to a value other than 0x0800,
-0x0806, or 0x86dd, the value of \fBnw_proto\fR is ignored (see \fBFlow
-Syntax\fR above).
+0x0806, 0x8035 or 0x86dd, the value of \fBnw_proto\fR is ignored (see
+\fBFlow Syntax\fR above).
.
.IP \fBnw_tos=\fItos\fR
Matches IP ToS/DSCP or IPv6 traffic class field \fItos\fR, which is
.IP \fBarp\fR
Same as \fBdl_type=0x0806\fR.
.
+.IP \fBrarp\fR
+Same as \fBdl_type=0x8035\fR.
+.
.PP
The following field assignments require support for the NXM (Nicira
Extended Match) extension to OpenFlow. When one of these is specified,
.
.IP \fBarp_sha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
.IQ \fBarp_tha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
-When \fBdl_type\fR specifies ARP, \fBarp_sha\fR and \fBarp_tha\fR match
-the source and target hardware address, respectively. An address is
-specified as 6 pairs of hexadecimal digits delimited by colons.
+When \fBdl_type\fR specifies either ARP or RARP, \fBarp_sha\fR and
+\fBarp_tha\fR match the source and target hardware address, respectively. An
+address is specified as 6 pairs of hexadecimal digits delimited by colons.
.
.IP \fBipv6_src=\fIipv6\fR[\fB/\fInetmask\fR]
.IQ \fBipv6_dst=\fIipv6\fR[\fB/\fInetmask\fR]
.IP \fBstrip_vlan\fR
Strips the VLAN tag from a packet if it is present.
.
+.IP \fBpush_vlan\fR:\fIethertype\fR
+Push a new VLAN tag onto the packet. Ethertype is used as the the Ethertype
+for the tag. Only ethertype 0x8100 should be used. (0x88a8 which the spec
+allows isn't supported at the moment.)
+A priority of zero and the tag of zero are used for the new tag.
+.
+.IP \fBpush_mpls\fR:\fIethertype\fR
+If the packet does not already contain any MPLS labels, changes the
+packet's Ethertype to \fIethertype\fR, which must be either the MPLS
+unicast Ethertype \fB0x8847\fR or the MPLS multicast Ethertype
+\fB0x8848\fR, and then pushes an initial label stack entry. The label
+stack entry's default label is 2 if the packet contains IPv6 and 0
+otherwise, its default traffic control value is the low 3 bits of the
+packet's DSCP value (0 if the packet is not IP), and its TTL is copied
+from the IP TTL (64 if the packet is not IP).
+.IP
+If the packet does already contain an MPLS label, pushes a new
+outermost label as a copy of the existing outermost label.
+.IP
+There are some limitations in the implementation. \fBpush_mpls\fR
+followed by another \fBpush_mpls\fR will result in the first
+\fBpush_mpls\fR being discarded.
+.
+.IP \fBpop_mpls\fR:\fIethertype\fR
+Strips the outermost MPLS label stack entry. If the MPLS label
+stripped was the only one, changes the ethertype of a packet to
+\fIethertype\fR, which should not ordinarily be an MPLS Ethertype.
+.
+.IP
+There are some limitations in the implementation. \fBpop_mpls\fR
+followed by another \fBpush_mpls\fR without an intermediate
+\fBpush_mpls\fR will result in the first \fBpush_mpls\fR being
+discarded.
+.
.IP \fBmod_dl_src\fB:\fImac\fR
Sets the source Ethernet address to \fImac\fR.
.
Sets the IPv4 ToS/DSCP field to \fItos\fR. Valid values are between 0 and
255, inclusive. Note that the two lower reserved bits are never
modified.
-.
.RE
.IP
The following actions are Nicira vendor extensions that, as of this writing, are
.IP
Refer to \fBnicira\-ext.h\fR for more details.
.
-.IP "\fBautopath(\fIid\fB, \fIdst\fB[\fIstart\fB..\fIend\fB])\fR"
-Deprecated and slated for removal in Feburary 2013.
-.IP
-Given \fIid\fR, chooses an OpenFlow port and populates it in
-\fIdst\fB[\fIstart\fB..\fIend\fB]\fR, which must be an NXM field as
-described above.
-.IP
-Currently, \fIid\fR should be the OpenFlow port number of an interface on the
-bridge. If it isn't then \fIdst\fB[\fIstart\fB..\fIend\fB]\fR will be
-populated with the OpenFlow port "none". If \fIid\fR is a member of a bond,
-the normal bond selection logic will be used to choose the destination port.
-Otherwise, the register will be populated with \fIid\fR itself.
-.IP
-Refer to \fBnicira\-ext.h\fR for more details.
-.
.IP "\fBbundle(\fIfields\fB, \fIbasis\fB, \fIalgorithm\fB, \fIslave_type\fB, slaves:[\fIs1\fB, \fIs2\fB, ...])\fR"
Hashes \fIfields\fR using \fIbasis\fR as a universal hash parameter, then
applies the bundle link selection \fIalgorithm\fR to choose one of the listed
with no match criteria. (This is why the default \fBtable\fR is 1, to
keep the learned flows separate from the primary flow table 0.)
.
+.RS
+.IP \fBapply_actions(\fR[\fIaction\fR][\fB,\fIaction\fR...]\fB)
+Applies the specific action(s) immediately. The syntax of actions are same
+to \fBactions=\fR field.
+.
+.IP \fBclear_actions\fR
+Clears all the actions in the action set immediately.
+.
+.IP \fBwrite_metadata\fB:\fIvalue\fR[/\fImask\fR]
+Updates the metadata field for the flow. If \fImask\fR is omitted, the
+metadata field is set exactly to \fIvalue\fR; if \fImask\fR is specified, then
+a 1-bit in \fImask\fR indicates that the corresponding bit in the metadata
+field will be replaced with the corresponding bit from \fIvalue\fR. Both
+\fIvalue\fR and \fImask\fR are 64-bit values that are decimal by default; use
+a \fB0x\fR prefix to specify them in hexadecimal.
+.
+.IP \fBgoto_table\fR:\fItable\fR
+Indicates the next table in the process pipeline.
+.RE
+.
.IP "\fBfin_timeout(\fIargument\fR[\fB,\fIargument\fR]\fB)"
This action changes the idle timeout or hard timeout, or both, of this
OpenFlow rule when the rule matches a TCP packet with the FIN or RST
\fB\-\-strict\fR
Uses strict matching when running flow modification commands.
.
+.so lib/ofp-version.man
+.
.IP "\fB\-F \fIformat\fR[\fB,\fIformat\fR...]"
.IQ "\fB\-\-flow\-format=\fIformat\fR[\fB,\fIformat\fR...]"
\fBovs\-ofctl\fR supports the following individual flow formats, any
This combines Nicira Extended match with the ability to place a flow
in a specific table. Open vSwitch 1.2 and later supports this flow
format.
+.
+.IP "\fBOXM-OpenFlow12\fR"
+.IQ "\fBOXM-OpenFlow13\fR"
+These are the standard OXM (OpenFlow Extensible Match) flow format in
+OpenFlow 1.2 and 1.3, respectively.
.RE
.
.IP
\fBOpenFlow10\-table_id\fR or \fBOpenFlow10+table_id\fR.
.IP "\fBNXM\fR"
\fBNXM\-table_id\fR or \fBNXM+table_id\fR.
+.IP "\fBOXM\fR"
+\fBOXM-OpenFlow12\fR or \fBOXM-OpenFlow13\fR.
.RE
.
.IP