. ns
. IP "\\$1"
..
-.TH ovs\-ofctl 8 "January 2011" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-ofctl 8 "@VERSION@" "Open vSwitch" "Open vSwitch Manual"
.ds PN ovs\-ofctl
.
.SH NAME
program is a command line tool for monitoring and administering
OpenFlow switches. It can also show the current state of an OpenFlow
switch, including features, configuration, and table entries.
+It should work with any OpenFlow switch, not just Open vSwitch.
.
.SS "OpenFlow Switch Management Commands"
.PP
The following field assignments describe how a flow matches a packet.
If any of these assignments is omitted from the flow syntax, the field
is treated as a wildcard; thus, if all of them are omitted, the
-resulting flow matches all packets. The string \fB*\fR or \fBANY\fR
-may be specified to explicitly mark any of these fields as a wildcard.
+resulting flow matches all packets. The string \fB*\fR may be specified
+to explicitly mark any of these fields as a wildcard.
(\fB*\fR should be quoted to protect it from shell expansion.)
.
.IP \fBin_port=\fIport\fR
\fBar_spa\fR or \fBar_tpa\fR field, respectively, in ARP packets for
IPv4 and Ethernet.
.IP
-When \fBdl_type\fR is wildcarded or set to a value other than 0x0800
-or 0x0806, the values of \fBnw_src\fR and \fBnw_dst\fR are ignored
+When \fBdl_type=0x8035\fR or \fBrarp\fR is specified, matches the
+\fBar_spa\fR or \fBar_tpa\fR field, respectively, in RARP packets for
+IPv4 and Ethernet.
+.IP
+When \fBdl_type\fR is wildcarded or set to a value other than 0x0800,
+0x0806, or 0x8035, the values of \fBnw_src\fR and \fBnw_dst\fR are ignored
(see \fBFlow Syntax\fR above).
.
.IP \fBnw_proto=\fIproto\fR
8 bits of the ARP opcode. ARP opcodes greater than 255 are treated as
0.
.IP
+When \fBrarp\fR or \fBdl_type=0x8035\fR is specified, matches the lower
+8 bits of the ARP opcode. ARP opcodes greater than 255 are treated as
+0.
+.IP
When \fBdl_type\fR is wildcarded or set to a value other than 0x0800,
-0x0806, or 0x86dd, the value of \fBnw_proto\fR is ignored (see \fBFlow
-Syntax\fR above).
+0x0806, 0x8035 or 0x86dd, the value of \fBnw_proto\fR is ignored (see
+\fBFlow Syntax\fR above).
.
.IP \fBnw_tos=\fItos\fR
Matches IP ToS/DSCP or IPv6 traffic class field \fItos\fR, which is
.IP \fBarp\fR
Same as \fBdl_type=0x0806\fR.
.
+.IP \fBrarp\fR
+Same as \fBdl_type=0x8035\fR.
+.
.PP
The following field assignments require support for the NXM (Nicira
Extended Match) extension to OpenFlow. When one of these is specified,
.
.IP \fBarp_sha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
.IQ \fBarp_tha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
-When \fBdl_type\fR specifies ARP, \fBarp_sha\fR and \fBarp_tha\fR match
-the source and target hardware address, respectively. An address is
-specified as 6 pairs of hexadecimal digits delimited by colons.
+When \fBdl_type\fR specifies either ARP or RARP, \fBarp_sha\fR and
+\fBarp_tha\fR match the source and target hardware address, respectively. An
+address is specified as 6 pairs of hexadecimal digits delimited by colons.
.
.IP \fBipv6_src=\fIipv6\fR[\fB/\fInetmask\fR]
.IQ \fBipv6_dst=\fIipv6\fR[\fB/\fInetmask\fR]
allows isn't supported at the moment.)
A priority of zero and the tag of zero are used for the new tag.
.
+.IP \fBpush_mpls\fR:\fIethertype\fR
+If the packet does not already contain any MPLS labels, changes the
+packet's Ethertype to \fIethertype\fR, which must be either the MPLS
+unicast Ethertype \fB0x8847\fR or the MPLS multicast Ethertype
+\fB0x8848\fR, and then pushes an initial label stack entry. The label
+stack entry's default label is 2 if the packet contains IPv6 and 0
+otherwise, its default traffic control value is the low 3 bits of the
+packet's DSCP value (0 if the packet is not IP), and its TTL is copied
+from the IP TTL (64 if the packet is not IP).
+.IP
+If the packet does already contain an MPLS label, pushes a new
+outermost label as a copy of the existing outermost label.
+.IP
+There are some limitations in the implementation. \fBpush_mpls\fR
+followed by another \fBpush_mpls\fR will result in the first
+\fBpush_mpls\fR being discarded.
+.
+.IP \fBpop_mpls\fR:\fIethertype\fR
+Strips the outermost MPLS label stack entry. If the MPLS label
+stripped was the only one, changes the ethertype of a packet to
+\fIethertype\fR, which should not ordinarily be an MPLS Ethertype.
+.
+.IP
+There are some limitations in the implementation. \fBpop_mpls\fR
+followed by another \fBpush_mpls\fR without an intermediate
+\fBpush_mpls\fR will result in the first \fBpush_mpls\fR being
+discarded.
+.
.IP \fBmod_dl_src\fB:\fImac\fR
Sets the source Ethernet address to \fImac\fR.
.
.IP
Refer to \fBnicira\-ext.h\fR for more details.
.
-.IP "\fBautopath(\fIid\fB, \fIdst\fB[\fIstart\fB..\fIend\fB])\fR"
-Deprecated and slated for removal in Feburary 2013.
-.IP
-Given \fIid\fR, chooses an OpenFlow port and populates it in
-\fIdst\fB[\fIstart\fB..\fIend\fB]\fR, which must be an NXM field as
-described above.
-.IP
-Currently, \fIid\fR should be the OpenFlow port number of an interface on the
-bridge. If it isn't then \fIdst\fB[\fIstart\fB..\fIend\fB]\fR will be
-populated with the OpenFlow port "none". If \fIid\fR is a member of a bond,
-the normal bond selection logic will be used to choose the destination port.
-Otherwise, the register will be populated with \fIid\fR itself.
-.IP
-Refer to \fBnicira\-ext.h\fR for more details.
-.
.IP "\fBbundle(\fIfields\fB, \fIbasis\fB, \fIalgorithm\fB, \fIslave_type\fB, slaves:[\fIs1\fB, \fIs2\fB, ...])\fR"
Hashes \fIfields\fR using \fIbasis\fR as a universal hash parameter, then
applies the bundle link selection \fIalgorithm\fR to choose one of the listed
\fB\-\-strict\fR
Uses strict matching when running flow modification commands.
.
+.so lib/ofp-version.man
+.
.IP "\fB\-F \fIformat\fR[\fB,\fIformat\fR...]"
.IQ "\fB\-\-flow\-format=\fIformat\fR[\fB,\fIformat\fR...]"
\fBovs\-ofctl\fR supports the following individual flow formats, any
This combines Nicira Extended match with the ability to place a flow
in a specific table. Open vSwitch 1.2 and later supports this flow
format.
+.
+.IP "\fBOXM-OpenFlow12\fR"
+.IQ "\fBOXM-OpenFlow13\fR"
+These are the standard OXM (OpenFlow Extensible Match) flow format in
+OpenFlow 1.2 and 1.3, respectively.
.RE
.
.IP
\fBOpenFlow10\-table_id\fR or \fBOpenFlow10+table_id\fR.
.IP "\fBNXM\fR"
\fBNXM\-table_id\fR or \fBNXM+table_id\fR.
+.IP "\fBOXM\fR"
+\fBOXM-OpenFlow12\fR or \fBOXM-OpenFlow13\fR.
.RE
.
.IP