ofproto: Add selective Flow Removed messages and flow deletes (OpenFlow 0.9)

[sliver-openvswitch.git] / utilities / ovs-ofctl.8.in

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index 0b4856e..d7f3ad2 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -26,16 +26,15 @@ connecting to an OpenFlow switch.  The following connection methods
 are supported:
 
 .RS
-.TP
-\fBssl:\fIhost\fR[\fB:\fIport\fR]
-The specified SSL \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.  The \fB--private-key\fR, \fB--certificate\fR, and
-\fB--ca-cert\fR options are mandatory when this form is used.
+.IP "\fBssl:\fIip\fR[\fB:\fIport\fR]"
+The specified SSL \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
+The \fB--private-key\fR, \fB--certificate\fR, and \fB--ca-cert\fR
+options are mandatory when this form is used.
 
-.TP
-\fBtcp:\fIhost\fR[\fB:\fIport\fR]
-The specified TCP \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.
+.IP "\fBtcp:\fIip\fR[\fB:\fIport\fR]"
+The specified TCP \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
 
 .TP
 \fBunix:\fIfile\fR
@@ -144,7 +143,7 @@ switch's tables are removed.  See \fBFlow Syntax\fR, below, for the
 syntax of \fIflows\fR.
 
 .TP
-\fBmonitor \fIswitch\fR [\fImiss-len\fR [\fIsend-exp]]
+\fBmonitor \fIswitch\fR [\fImiss-len\fR]
 Connects to \fIswitch\fR and prints to the console all OpenFlow
 messages received.  Usually, \fIswitch\fR should specify a connection
 named on \fBovs\-openflowd\fR(8)'s \fB-l\fR or \fB--listen\fR command line
@@ -157,11 +156,6 @@ OpenFlow reference implementation does not send these messages to the
 \fBovs\-ofctl monitor\fR client connection unless a nonzero value is
 specified on this argument.
 
-If \fIsend-exp\fR is specified as \fB1\fR, \fBovs\-ofctl\fR will also
-request to be sent flow expiration messages.  If this argument is
-omitted, or \fB0\fR is specified, then \fRovs\-ofctl\fR will not request
-flow expirations.
-
 This command may be useful for debugging switch or controller
 implementations.
 
@@ -229,6 +223,11 @@ as \fIvlan\fR to match packets that are not tagged with a Virtual LAN;
 otherwise, specify a number between 0 and 4095, inclusive, as the
 12-bit VLAN ID to match.
 
+.IP \fBdl_vlan_pcp=\fIpriority\fR
+Matches IEEE 802.1q Priority Code Point (PCP) \fIpriority\fR, which is
+specified as a value between 0 and 7, inclusive.  A higher value
+indicates a higher frame priority level.
+
 .IP \fBdl_src=\fImac\fR
 Matches Ethernet source address \fImac\fR, which is specified as 6 pairs 
 of hexadecimal digits delimited by colons (e.g. \fB00:0A:E4:25:6B:B0\fR).
@@ -353,6 +352,24 @@ Sets the source Ethernet address to \fImac\fR.
 
 .IP \fBmod_dl_dst\fB:\fImac\fR
 Sets the destination Ethernet address to \fImac\fR.
+
+.IP \fBmod_nw_src\fB:\fIip\fR
+Sets the IPv4 source address to \fIip\fR.
+
+.IP \fBmod_nw_dst\fB:\fIip\fR
+Sets the IPv4 destination address to \fIip\fR.
+
+.IP \fBmod_tp_src\fB:\fIport\fR
+Sets the TCP or UDP source port to \fIport\fR.
+
+.IP \fBmod_tp_dst\fB:\fIport\fR
+Sets the TCP or UDP destination port to \fIport\fR.
+
+.IP \fBmod_nw_tos\fB:\fItos\fR
+Sets the IP ToS/DSCP field to \fItos\fR.  Valid values are between 0 and
+255, inclusive.  Note that the two lower reserved bits are never
+modified.
+
 .RE
 
 .IP