\fBnx\-match\fR mode. See the description of the \fBset\-frags\fR
command, above, for more details.
.
+.IP \fBarp_spa=\fIip\fR[\fB/\fInetmask\fR]
+.IQ \fBarp_tpa=\fIip\fR[\fB/\fInetmask\fR]
+When \fBdl_type\fR specifies either ARP or RARP, \fBarp_spa\fR and
+\fBarp_tha\fR match the source and target IPv4 address, respectively.
+An address may be specified as an IP address or host name
+(e.g. \fB192.168.1.1\fR or \fBwww.example.com\fR). The optional
+\fInetmask\fR allows restricting a match to an IPv4 address prefix.
+The netmask may be specified as a dotted quad
+(e.g. \fB192.168.1.0/255.255.255.0\fR) or as a CIDR block
+(e.g. \fB192.168.1.0/24\fR).
+.
.IP \fBarp_sha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
.IQ \fBarp_tha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
When \fBdl_type\fR specifies either ARP or RARP, \fBarp_sha\fR and
``packet_in'' message will be sent only to the controllers having
controller id zero which have registered for the invalid ttl packets.
.
+.IP \fBset_mpls_label\fR:\fIlabel\fR
+Set the label of the outer MPLS label stack entry of a packet.
+\fIlabel\fR should be a 20-bit value that is decimal by default;
+use a \fB0x\fR prefix to specify them in hexadecimal.
+.
+.IP \fBset_mpls_tc\fR:\fItc\fR
+Set the traffic-class of the outer MPLS label stack entry of a packet.
+\fItc\fR should be a in the range 0 to 7 inclusive.
+.
.IP \fBset_mpls_ttl\fR:\fIttl\fR
Set the TTL of the outer MPLS label stack entry of a packet.
\fIttl\fR should be in the range 0 to 255 inclusive.