ofp-actions: Make ofpacts_check() report consistency for all protocols.

[sliver-openvswitch.git] / utilities / ovs-ofctl.8.in

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index 992e2fc..e5e488a 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -923,6 +923,17 @@ The \fBip_frag\fR match type is likely to be most useful in
 \fBnx\-match\fR mode.  See the description of the \fBset\-frags\fR
 command, above, for more details.
 .
+.IP \fBarp_spa=\fIip\fR[\fB/\fInetmask\fR]
+.IQ \fBarp_tpa=\fIip\fR[\fB/\fInetmask\fR]
+When \fBdl_type\fR specifies either ARP or RARP, \fBarp_spa\fR and
+\fBarp_tha\fR match the source and target IPv4 address, respectively.
+An address may be specified as an IP address or host name
+(e.g. \fB192.168.1.1\fR or \fBwww.example.com\fR).  The optional
+\fInetmask\fR allows restricting a match to an IPv4 address prefix.
+The netmask may be specified as a dotted quad
+(e.g. \fB192.168.1.0/255.255.255.0\fR) or as a CIDR block
+(e.g. \fB192.168.1.0/24\fR).
+.
 .IP \fBarp_sha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
 .IQ \fBarp_tha=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
 When \fBdl_type\fR specifies either ARP or RARP, \fBarp_sha\fR and
@@ -976,6 +987,30 @@ Neighbor Advertisement (ICMPv6 type 136), matches the target link\-layer
 address option.  An address is specified as 6 pairs of hexadecimal
 digits delimited by colons.
 .
+.IP \fBmpls_bos=\fIbos\fR
+When \fBdl_type\fR is 0x8847 or 0x8848 (possibly via shorthand e.g.,
+\fBmpls\fR or \fBmplsm\fR), matches the bottom-of-stack bit of the
+outer-most MPLS label stack entry. Valid values are 0 and 1.
+.IP
+If 1 then for a packet with a well-formed MPLS label stack the
+bottom-of-stack bit indicates that the outer label stack entry is also
+the inner-most label stack entry and thus that is that there is only one
+label stack entry present.  Conversely, if 0 then for a packet with a
+well-formed MPLS label stack the bottom-of-stack bit indicates that the
+outer label stack entry is not the inner-most label stack entry and
+thus there is more than one label stack entry present.
+.
+.IP \fBmpls_label=\fIlabel\fR
+When \fBdl_type\fR is 0x8847 or 0x8848 (possibly via shorthand e.g.,
+\fBmpls\fR or \fBmplsm\fR), matches the label of the outer
+MPLS label stack entry. The label is a 20-bit value that is decimal by default;
+use a \fB0x\fR prefix to specify them in hexadecimal.
+.
+.IP \fBmpls_tc=\fItc\fR
+When \fBdl_type\fR is 0x8847 or 0x8848 (possibly via shorthand e.g.,
+\fBmpls\fR or \fBmplsm\fR), matches the traffic-class of the outer
+MPLS label stack entry. Valid values are between 0 (lowest) and 7 (highest).
+.
 .IP \fBtun_id=\fItunnel-id\fR[\fB/\fImask\fR]
 .IQ \fBtunnel_id=\fItunnel-id\fR[\fB/\fImask\fR]
 Matches tunnel identifier \fItunnel-id\fR.  Only packets that arrive
@@ -1266,6 +1301,15 @@ invalid ttl packets.  If controller ids are not specified, the
 ``packet_in'' message will be sent only to the controllers having
 controller id zero which have registered for the invalid ttl packets.
 .
+.IP \fBset_mpls_label\fR:\fIlabel\fR
+Set the label of the outer MPLS label stack entry of a packet.
+\fIlabel\fR should be a 20-bit value that is decimal by default;
+use a \fB0x\fR prefix to specify them in hexadecimal.
+.
+.IP \fBset_mpls_tc\fR:\fItc\fR
+Set the traffic-class of the outer MPLS label stack entry of a packet.
+\fItc\fR should be a in the range 0 to 7 inclusive.
+.
 .IP \fBset_mpls_ttl\fR:\fIttl\fR
 Set the TTL of the outer MPLS label stack entry of a packet.
 \fIttl\fR should be in the range 0 to 255 inclusive.