Implement IPFIX export

[sliver-openvswitch.git] / utilities / ovs-ofctl.8.in

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index 609df9f..f46b9dc 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -962,9 +962,9 @@ Sets the TCP or UDP source port to \fIport\fR.
 Sets the TCP or UDP destination port to \fIport\fR.
 .
 .IP \fBmod_nw_tos\fB:\fItos\fR
-Sets the IPv4 ToS/DSCP field to \fItos\fR.  Valid values are between 0 and
-255, inclusive.  Note that the two lower reserved bits are never
-modified.
+Sets the IPv4 ToS/DSCP field to \fItos\fR, which must be a multiple of
+4 between 0 and 255.  This action does not modify the two least
+significant bits of the ToS field (the ECN bits).
 .RE
 .IP
 The following actions are Nicira vendor extensions that, as of this writing, are
@@ -1063,6 +1063,23 @@ in field \fIdst\fR.
 Example: \fBload:55\->NXM_NX_REG2[0..5]\fR loads value 55 (bit pattern
 \fB110111\fR) into bits 0 through 5, inclusive, in register 2.
 .
+.IP "\fBpush:\fIsrc\fB[\fIstart\fB..\fIend\fB]"
+Pushes \fIstart\fR to \fIend\fR bits inclusive, in fields
+on top of the stack.
+.IP
+Example: \fBpush:NXM_NX_REG2[0..5]\fR push the value stored in register
+2 bits 0 through 5, inclusive, on to the internal stack.
+.
+.IP "\fBpop:\fIdst\fB[\fIstart\fB..\fIend\fB]"
+Pops from the top of the stack, retrieves the \fIstart\fR to \fIend\fR bits
+inclusive, from the value popped and store them into the corresponding
+bits in \fIdst\fR.
+.
+.IP
+Example: \fBpop:NXM_NX_REG2[0..5]\fR pops the value from top of the stack.
+Set register 2 bits 0 through 5, inclusive, based on bits 0 through 5 from the
+value just popped.
+.
 .IP "\fBset_field:\fIvalue\fB\->\fIdst"
 Writes the literal \fIvalue\fR into the field \fIdst\fR, which should
 be specified as a name used for matching.  (This is similar to
@@ -1224,6 +1241,30 @@ flow's creation, not since the receipt of the FIN or RST.)
 .RE
 .IP
 This action was added in Open vSwitch 1.5.90.
+.
+.IP "\fBsample(\fIargument\fR[\fB,\fIargument\fR]...\fB)\fR"
+Samples packets and sends one sample for every sampled packet.
+.IP
+\fIargument\fR takes the following forms:
+.RS
+.IP "\fBprobability=\fIpackets\fR"
+The number of sampled packets out of 65535.  Must be greater or equal to 1.
+.IP "\fBcollector_set_id=\fIid\fR"
+The unsigned 32-bit integer identifier of the set of sample collectors
+to send sampled packets to.  Defaults to 0.
+.IP "\fBobs_domain_id=\fIid\fR"
+When sending samples to IPFIX collectors, the unsigned 32-bit integer
+Observation Domain ID sent in every IPFIX flow record.  Defaults to 0.
+.IP "\fBobs_point_id=\fIid\fR"
+When sending samples to IPFIX collectors, the unsigned 32-bit integer
+Observation Point ID sent in every IPFIX flow record.  Defaults to 0.
+.RE
+.IP
+Refer to \fBovs\-vswitchd.conf.db\fR(8) for more details on
+configuring sample collector sets.
+.IP
+This action was added in Open vSwitch 1.10.90.
+.
 .IP "\fBexit\fR"
 This action causes Open vSwitch to immediately halt execution of further
 actions.  Those actions which have already been executed are unaffected.  Any
@@ -1538,3 +1579,4 @@ Prints the flow entries in the switch.
 .BR ovs\-appctl (8),
 .BR ovs\-controller (8),
 .BR ovs\-vswitchd (8)
+.BR ovs\-vswitchd.conf.db (8)