Prepare Open vSwitch 1.1.2 release.

[sliver-openvswitch.git] / utilities / ovs-vlan-test.8.in

diff --git a/utilities/ovs-vlan-test.8.in b/utilities/ovs-vlan-test.8.in
index 82b4cf7..602d785 100644 (file)
--- a/utilities/ovs-vlan-test.8.in
+++ b/utilities/ovs-vlan-test.8.in
@@ -18,23 +18,7 @@ client mode connecting to an \fBovs\-vlan\-test\fR server.
 \fBovs\-vlan\-test\fR will display "OK" if it did not detect problems.
 .PP
 Some examples of the types of problems that may be encountered are:
-.IP \(bu
-When NICs use vlan stripping on receive they must pass a pointer to
-a vlan group when reporting the stripped tag to the networking core.
-If there is no vlan group in use then some drivers just drop the
-extracted tag.  Drivers are supposed to only enable stripping if a
-vlan group is registered but not all of them do that.
-.
-.IP \(bu
-Some drivers size their receive buffers based on whether a vlan
-group is enabled, meaning that a maximum size packet with a vlan tag
-will not fit if a vlan group is not configured.
-.
-.IP \(bu
-On transmit some drivers expect that vlan acceleration will be used
-if it is available (which can only be done if a vlan group is
-configured).  In these cases, the driver may fail to parse the packet
-and correctly setup checksum offloading and/or TSO.
+.so utilities/ovs-vlan-bugs.man
 .
 .SS "Client Mode"
 An \fBovs\-vlan\-test\fR client may be run on a host to check for VLAN
@@ -77,19 +61,19 @@ Set up a bridge which forwards traffic originating from \fB1.2.3.4\fR out
 .IP
 .B \-\- set Interface vlan\-br\-tag type=internal
 .IP
-.B ifconfig vlan\-br\-tag up 5.6.7.8
+.B ifconfig vlan\-br\-tag up 1.2.3.4
 .
 .PP
 Run an \fBovs\-vlan\-test\fR server listening for client control traffic on
-5.6.7.8 port 80 and VLAN traffic on the default port of 1.2.3.0.
+172.16.0.142 port 8080 and VLAN traffic on the default port of 1.2.3.3.
 .IP
-.B ovs\-vlan\-test \-s 5.6.7.8:80 1.2.3.0
+.B ovs\-vlan\-test \-s 172.16.0.142:8080 1.2.3.3
 .
 .PP
-Run an \fBovs\-vlan\-test\fR client with a control server located at 5.6.7.8
-port 80 and a local VLAN ip of 1.2.3.4.
+Run an \fBovs\-vlan\-test\fR client with a control server located at
+172.16.0.142 port 8080 and a local VLAN ip of 1.2.3.4.
 .IP
-.B ovs\-vlan\-test 5.6.7.8:80 1.2.3.4
+.B ovs\-vlan\-test 172.16.0.142:8080 1.2.3.4
 .
 .TP