Open vSwitch database if it is empty. This command is provided to
initialize the database without executing any other command.
.
+.IP "\fBshow\fR"
+Prints a brief overview of the database contents.
+.
.IP "\fBemer\-reset\fR"
Reset the configuration into a clean state. It deconfigures OpenFlow
controllers, OVSDB servers, and SSL, and deletes port mirroring,
have no ports (other than \fIbridge\fR itself).
.IP
Without \fB\-\-may\-exist\fR, attempting to create a bridge that
-exists is an error. With \fB\-\-may\-exist\fR, \fIbridge\fR may
-already exist (but it must be a real bridge, not a VLAN bridge).
+exists is an error. With \fB\-\-may\-exist\fR, this command does
+nothing if \fIbridge\fR already exists as a real bridge.
.
.IP "[\fB\-\-may\-exist\fR] \fBadd\-br \fIbridge parent vlan\fR"
Creates a ``fake bridge'' named \fIbridge\fR within the existing Open
\fIbridge\fR will have no ports (other than \fIbridge\fR itself).
.IP
Without \fB\-\-may\-exist\fR, attempting to create a bridge that
-exists is an error. With \fB\-\-may\-exist\fR, \fIbridge\fR may
-already exist (but it must have the specified \fIvlan\fR and
-\fIparent\fR).
+exists is an error. With \fB\-\-may\-exist\fR, this command does
+nothing if \fIbridge\fR already exists as a VLAN bridge under
+\fIparent\fR for \fIvlan\fR.
.
.IP "[\fB\-\-if\-exists\fR] \fBdel\-br \fIbridge\fR"
Deletes \fIbridge\fR and all of its ports. If \fIbridge\fR is a real
command (see \fBDatabase Commands\fR below).
.IP
Without \fB\-\-may\-exist\fR, attempting to create a port that exists
-is an error. With \fB\-\-may\-exist\fR, \fIport\fR may already exist
-(but it must be on \fIbridge\fR and not be a bonded port).
+is an error. With \fB\-\-may\-exist\fR, this command does nothing if
+\fIport\fR already exists on \fIbridge\fR and is not a bonded port.
.
.IP "[\fB\-\-fake\-iface\fR] \fBadd\-bond \fIbridge port iface\fR\&... [\fIcolumn\fR[\fB:\fIkey\fR]\fR=\fIvalue\fR]\&...\fR"
Creates on \fIbridge\fR a new port named \fIport\fR that bonds
software that requires it.
.IP
Without \fB\-\-may\-exist\fR, attempting to create a port that exists
-is an error. With \fB\-\-may\-exist\fR, \fIport\fR may already exist
-(but it must be on \fIbridge\fR and bond together exactly the
-specified interface).
+is an error. With \fB\-\-may\-exist\fR, this command does nothing if
+\fIport\fR already exists on \fIbridge\fR and bonds together exactly
+the specified interfaces.
.
.IP "[\fB\-\-if\-exists\fR] \fBdel\-port \fR[\fIbridge\fR] \fIport\fR"
Deletes \fIport\fR. If \fIbridge\fR is omitted, \fIport\fR is removed
.IP "\fBQueue\fR"
Configuration for one queue within a \fBQoS\fR configuration. Records
may only be identified by UUID.
-.IP "\fBMonitor\fR"
-Connectivity Monitoring attached to an \fBInterface\fR. Records may be
-identified by \fBInterface\fR name.
-.IP "\fBMaintenance_Point\fR"
-Maintenance Point managed by a \fBMonitor\fR.
.IP "\fBMirror\fR"
A port mirroring configuration attached to a bridge. Records may be
identified by mirror name.
If \fB@\fIname\fR is specified, then the UUID for \fIrecord\fR may be
referred to by that name later in the same \fBovs\-vsctl\fR
invocation in contexts where a UUID is expected.
+.IP
+Both \fB\-\-id\fR and the \fIcolumn\fR arguments are optional, but
+usually at least one or the other should be specified. If both are
+omitted, then \fBget\fR has no effect except to verify that
+\fIrecord\fR exists in \fItable\fR.
.
.IP "\fBset \fItable record column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
Sets the value of each specified \fIcolumn\fR in the given
Consider specifying \fB\-\-timeout=0\fR along with
\fB\-\-wait\-until\fR, to prevent \fBovs\-vsctl\fR from terminating
after waiting only at most 5 seconds.
+.IP "\fBcomment \fR[\fIarg\fR]..."
+This command has no effect on behavior, but any database log record
+created by the command will include the command and its arguments.
.SH "EXAMPLES"
Create a new bridge named br0 and add port eth0 to it:
.IP
\fIuuid2\fR" to destroy each of them.)
.SS "Connectivity Monitoring"
.PP
-Create a Monitor which manages a couple of remote Maintenance Points on eth0.
-.IP
-.B "ovs\-vsctl \-\- set Interface eth0 Monitor=@newmon \(rs"
-.IP
-.B "\-\- \-\-id=@newmon create Monitor mpid=1 remote_mps=@mp2,@mp3 \(rs"
-.IP
-.B "\-\- \-\-id=@mp2 create Maintenance_Point mpid=2 \(rs"
+Monitor connectivity to a remote maintenance point on eth0.
.IP
-.B "\-\- \-\-id=@mp3 create Maintenance_Point mpid=3"
+.B "ovs\-vsctl set Interface eth0 cfm_mpid=1 cfm_remote_mpid=2"
.PP
-Deconfigure the Monitor record from above:
+Deconfigure connectivity monitoring from above:
.IP
-.B "ovs\-vsctl clear Interface eth0 Monitor"
+.B "ovs\-vsctl clear Interface eth0 cfm_mpid cfm_remote_mpid"
.SS "NetFlow"
.PP
Configure bridge \fBbr0\fR to send NetFlow records to UDP port 5566 on
git://git.onelab.eu / sliver-openvswitch.git / blobdiff