datapath: Use multicast groups allocated for upcalls.

[sliver-openvswitch.git] / utilities / ovs-vsctl.8.in

diff --git a/utilities/ovs-vsctl.8.in b/utilities/ovs-vsctl.8.in
index 281756c..c550909 100644 (file)
--- a/utilities/ovs-vsctl.8.in
+++ b/utilities/ovs-vsctl.8.in
@@ -148,10 +148,10 @@ initialize the database without executing any other command.
 .IP "\fBemer\-reset\fR"
 Reset the configuration into a clean state.  It deconfigures OpenFlow
 controllers, OVSDB servers, and SSL, and deletes port mirroring,
-NetFlow, and sFlow configuration.  This command also removes all
-\fBother\-config\fR keys from all database records, except that
-\fBother\-config:hwaddr\fR is preserved if it is present in a Bridge
-record.  Other networking configuration is left as-is.
+\fBfail_mode\fR, NetFlow, and sFlow configuration.  This command also
+removes all \fBother\-config\fR keys from all database records, except
+that \fBother\-config:hwaddr\fR is preserved if it is present in a
+Bridge record.  Other networking configuration is left as-is.
 .
 .SS "Bridge Commands"
 These commands examine and manipulate Open vSwitch bridges.
@@ -450,6 +450,9 @@ identified by mirror name.
 .IP "\fBController\fR"
 Configuration for an OpenFlow controller.  A controller attached to a
 particular bridge may be identified by the bridge's name.
+.IP "\fBManager\fR"
+Configuration for an OVSDB connection.  Records may be identified
+by target (e.g. \fBtcp:1.2.3.4\fR).
 .IP "\fBNetFlow\fR"
 A NetFlow configuration attached to a bridge.  Records may be
 identified by bridge name.
@@ -460,6 +463,11 @@ specifying \fB.\fR as the record name.
 .IP "\fBsFlow\fR"
 An sFlow configuration attached to a bridge.  Records may be
 identified by bridge name.
+.IP "\fBMonitor\fR"
+Connectivity Monitoring attached to an interface.  Records may be
+identified by interface name.
+.IP "\fBMaintenance_Point\fR"
+Maintenance Point managed by a Monitor.
 .PP
 Record names must be specified in full and with correct
 capitalization.  Names of tables and columns are not case-sensitive,
@@ -690,6 +698,21 @@ then delete the QoS record:
 database.  To delete them, use "\fBovs\-vsctl list Queue\fR" to find
 their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR
 \fIuuid2\fR" to destroy each of them.)
+.SS "Connectivity Monitoring"
+.PP
+Create a Monitor which manages a couple of remote Maintenance Points on eth0.
+.IP
+.B "ovs\-vsctl \-\- set Interface eth0 Monitor=@newmon \(rs"
+.IP
+.B "\-\- \-\-id=@newmon create Monitor mpid=1 remote_mps=@mp2,@mp3 \(rs"
+.IP
+.B "\-\- \-\-id=@mp2 create Maintenance_Point mpid=2 \(rs"
+.IP
+.B "\-\- \-\-id=@mp3 create Maintenance_Point mpid=3"
+.PP
+Deconfigure the Monitor record from above:
+.IP
+.B "ovs\-vsctl clear Interface eth0 Monitor"
 .SS "NetFlow"
 .PP
 Configure bridge \fBbr0\fR to send NetFlow records to UDP port 5566 on