. IP "\\$1"
..
.TH ovs\-vswitchd 8 "June 2009" "Open vSwitch" "Open vSwitch Manual"
+.\" This program's name:
.ds PN ovs\-vswitchd
+.\" SSL peer program's name:
+.ds SN ovs\-controller
.
.SH NAME
ovs\-vswitchd \- Open vSwitch daemon
\fIdatabase\fR
.
.SH DESCRIPTION
-A daemon that manages and controls any number of Open vSwitch switches
+A daemon that manages and controls any number of Open vSwitch switches
on the local machine.
.PP
-The mandatory \fIdatabase\fR argument specifies the
-\fBovsdb\-server\fR from which \fBovs\-vswitchd\fR's configuration
-should be retrieved. It takes one of the following forms:
+The mandatory \fIdatabase\fR argument normally takes the form
+\fBunix:\fIfile\fR, where \fIfile\fR is the name of a Unix domain
+socket on which \fBovsdb\-server\fR is listening. However, all of the
+following forms are accepted:
.so ovsdb/remote-active.man
+.so ovsdb/remote-passive.man
.PP
\fBovs\-vswitchd\fR retrieves its configuration from \fIdatabase\fR at
startup. It sets up Open vSwitch datapaths and then operates
Upon receipt of a SIGHUP signal, \fBovs\-vswitchd\fR reopens its log
file, if one was specified on the command line.
.PP
-\fBovs\-vswitchd\fR switches may be configured with any of the following
+\fBovs\-vswitchd\fR switches may be configured with any of the following
features:
.
.IP \(bu
A single \fBovs\-vswitchd\fR can manage any number of switch instances, up
to the maximum number of supported Open vSwitch datapaths.
.PP
+\fBovs\-vswitchd\fR provides all the features of \fBovs-openflowd\fR,
+and more. Do not run both daemons at the same time.
+.PP
\fBovs\-vswitchd\fR does all the necessary management of Open vSwitch datapaths
itself. Thus, external tools, such \fBovs\-dpctl\fR(8), are not needed for
managing datapaths in conjunction with \fBovs\-vswitchd\fR, and their use
the Open vSwitch kernel module.
.PP
.SH OPTIONS
-.IP "\fB--fake-proc-net\fR"
+.IP "\fB\-\-mlockall\fR"
+Causes \fBovs\-vswitchd\fR to call the \fBmlockall()\fR function, to
+attempt to lock all of its process memory into physical RAM,
+preventing the kernel from paging any of its memory to disk. This
+helps to avoid networking interruptions due to system memory pressure.
+.IP
+Some systems do not support \fBmlockall()\fR at all, and other systems
+only allow privileged users, such as the superuser, to use it.
+\fBovs\-vswitchd\fR emits a log message if \fBmlockall()\fR is
+unavailable or unsuccessful.
+.
+.IP "\fB\-\-fake\-proc\-net\fR"
Causes \fBovs\-vswitchd\fR to simulate some files in \fB/proc/net/vlan\fR
and \fB/proc/net/bonding\fR that some legacy software expects to
exist. This option should only be used if such legacy software is
actually in use. It requires the \fBbrcompat_mod.ko\fR kernel module
to be loaded.
+.IP
+On non-Linux hosts, this option is accepted but has no effect.
.
.so lib/daemon.man
+.SS "Public Key Infrastructure Options"
.so lib/ssl.man
.so lib/ssl-bootstrap.man
.so lib/vlog.man
\fBovs\-vswitchd\fR process. The currently supported commands are
described below. The command descriptions assume an understanding of
how to configure Open vSwitch.
+.SS "GENERAL COMMANDS"
+.IP "\fBexit\fR"
+Causes \fBovs\-vswitchd\fR to gracefully terminate.
.SS "BRIDGE COMMANDS"
These commands manage bridges.
.IP "\fBfdb/show\fR \fIbridge\fR"
Lists each MAC address/VLAN pair learned by the specified \fIbridge\fR,
along with the port on which it was learned and the age of the entry,
in seconds.
+.IP "\fBbridge/reconnect\fR [\fIbridge\fR]"
+Makes \fIbridge\fR drop all of its OpenFlow controller connections and
+reconnect. If \fIbridge\fR is not specified, then all bridges drop
+their controller connections and reconnect.
+.IP
+This command might be useful for debugging OpenFlow controller issues.
.
-.IP "\fBbridge/dump-flows\fR \fIbridge\fR"
+.IP "\fBbridge/dump\-flows\fR \fIbridge\fR"
Lists all flows in \fIbridge\fR, including those normally hidden to
-commands such as \fBovs-ofctl dump-flows\fR. Flows set up by mechanisms
+commands such as \fBovs\-ofctl dump\-flows\fR. Flows set up by mechanisms
such as in-band control and fail-open are hidden from the controller
since it is not allowed to modify or override them.
.SS "BOND COMMANDS"
the slave, and the MAC learning table entries that hash to each MAC.
.IP "\fBbond/migrate\fR \fIport\fR \fIhash\fR \fIslave\fR"
Assigns a given MAC hash to a new slave. \fIport\fR specifies the
-bond port, \fIhash\fR either the MAC hash to be migrated (as a decimal
-number between 0 and 255) or an Ethernet address to be hashed, and
-\fIslave\fR the new slave to be assigned.
+bond port, \fIhash\fR the MAC hash to be migrated (as a decimal
+number between 0 and 255), and \fIslave\fR the new slave to be
+assigned.
.IP
The reassignment is not permanent: rebalancing or fail-over will
cause the MAC hash to be shifted to a new slave in the usual
manner.
.IP
A MAC hash cannot be migrated to a disabled slave.
-.IP "\fBbond/set-active-slave\fR \fIport\fR \fIslave\fR"
+.IP "\fBbond/set\-active\-slave\fR \fIport\fR \fIslave\fR"
Sets \fIslave\fR as the active slave on \fIport\fR. \fIslave\fR must
currently be enabled.
.IP
The setting is not permanent: a new active slave will be selected
if \fIslave\fR becomes disabled.
-.IP "\fBbond/enable-slave\fR \fIport\fR \fIslave\fR"
-.IQ "\fBbond/disable-slave\fR \fIport\fR \fIslave\fR"
+.IP "\fBbond/enable\-slave\fR \fIport\fR \fIslave\fR"
+.IQ "\fBbond/disable\-slave\fR \fIport\fR \fIslave\fR"
Enables (or disables) \fIslave\fR on the given bond \fIport\fR, skipping any
updelay (or downdelay).
.IP
This setting is not permanent: it persists only until the carrier
status of \fIslave\fR changes.
-.IP "\fBbond/hash\fR \fImac\fR"
-Returns the hash value which would be used for \fImac\fR.
+.IP "\fBbond/hash\fR \fImac\fR [\fIvlan\fR]"
+Returns the hash value which would be used for \fImac\fR with \fIvlan\fR
+if specified.
.
+.so ofproto/ofproto-unixctl.man
.so lib/vlog-unixctl.man
+.so lib/stress-unixctl.man
.SH "SEE ALSO"
.BR ovs\-appctl (8),
.BR ovs\-brcompatd (8),
git://git.onelab.eu / sliver-openvswitch.git / blobdiff