ovs\-vswitchd \- Open vSwitch daemon
.
.SH SYNOPSIS
-.B ovs\-vswitchd
-\fIdatabase\fR
+\fBovs\-vswitchd \fR[\fIdatabase\fR]
.
.SH DESCRIPTION
A daemon that manages and controls any number of Open vSwitch switches
on the local machine.
.PP
-The mandatory \fIdatabase\fR argument normally takes the form
-\fBunix:\fIfile\fR, where \fIfile\fR is the name of a Unix domain
-socket on which \fBovsdb\-server\fR is listening. However, all of the
-following forms are accepted:
+The \fIdatabase\fR argument specifies how \fBovs\-vswitchd\fR connects
+to \fBovsdb\-server\fR. The default is \fBunix:@RUNDIR@/db.sock\fR.
+The following forms are accepted:
.so ovsdb/remote-active.man
.so ovsdb/remote-passive.man
.PP
A single \fBovs\-vswitchd\fR can manage any number of switch instances, up
to the maximum number of supported Open vSwitch datapaths.
.PP
-\fBovs\-vswitchd\fR provides all the features of \fBovs-openflowd\fR,
-and more. Do not run both daemons at the same time.
-.PP
\fBovs\-vswitchd\fR does all the necessary management of Open vSwitch datapaths
itself. Thus, external tools, such \fBovs\-dpctl\fR(8), are not needed for
managing datapaths in conjunction with \fBovs\-vswitchd\fR, and their use
.IP "\fBqos/show\fR \fIinterface\fR"
Queries the kernel for Quality of Service configuration and statistics
associated with the given \fIinterface\fR.
-.IP "\fBcfm/show\fR \fIinterface\fR"
+.IP "\fBcfm/show\fR [\fIinterface\fR]"
Displays detailed information about Connectivity Fault Management
-configured on \fIinterface\fR.
+configured on \fIinterface\fR. If \fIinterface\fR is not specified,
+then displays detailed information about all interfaces with CFM
+enabled.
+.IP "\fBcfm/set-fault\fR [\fIinterface\fR] \fIstatus\fR"
+Force the fault status of the CFM module on \fIinterface\fR (or all
+interfaces if none is given) to be \fIstatus\fR. \fIstatus\fR can be
+"true", "false", or "normal" which reverts to the standard behavior.
+.IP "\fBstp/tcn\fR [\fIbridge\fR]"
+Forces a topology change event on \fIbridge\fR if it's running STP. This
+may cause it to send Topology Change Notifications to its peers and flush
+its MAC table.. If no \fIbridge\fR is given, forces a topology change
+event on all bridges.
.SS "BRIDGE COMMANDS"
These commands manage bridges.
+.IP "\fBfdb/flush\fR [\fIbridge\fR]"
+Flushes \fIbridge\fR MAC address learning table, or all learning tables
+if no \fIbridge\fR is given.
.IP "\fBfdb/show\fR \fIbridge\fR"
Lists each MAC address/VLAN pair learned by the specified \fIbridge\fR,
along with the port on which it was learned and the age of the entry,
.IP "\fBbond/list\fR"
Lists all of the bonds, and their slaves, on each bridge.
.
-.IP "\fBbond/show\fR \fIport\fR"
-Lists all of the bond-specific information about the given bonded
-\fIport\fR: updelay, downdelay, time until the next rebalance. Also
-lists information about each slave: whether it is enabled or disabled,
-the time to completion of an updelay or downdelay if one is in
-progress, whether it is the active slave, the MAC hashes assigned to
-the slave, and the MAC learning table entries that hash to each MAC.
-Any LACP information related to this bond may be found using the
-\fBlacp/show\fR command.
+.IP "\fBbond/show\fR [\fIport\fR]"
+Lists all of the bond-specific information (updelay, downdelay, time
+until the next rebalance) about the given bonded \fIport\fR, or all
+bonded ports if no \fIport\fR is given. Also lists information about
+each slave: whether it is enabled or disabled, the time to completion
+of an updelay or downdelay if one is in progress, whether it is the
+active slave, the hashes assigned to the slave. Any LACP information
+related to this bond may be found using the \fBlacp/show\fR command.
+.
.IP "\fBbond/migrate\fR \fIport\fR \fIhash\fR \fIslave\fR"
Only valid for SLB bonds. Assigns a given MAC hash to a new slave.
\fIport\fR specifies the bond port, \fIhash\fR the MAC hash to be
Returns the hash value which would be used for \fImac\fR with \fIvlan\fR
and \fIbasis\fR if specified.
.
-.IP "\fBlacp/show\fR \fIport\fR"
+.IP "\fBlacp/show\fR [\fIport\fR]"
Lists all of the LACP related information about the given \fIport\fR:
active or passive, aggregation key, system id, and system priority. Also
lists information about each slave: whether it is enabled or disabled,
whether it is attached or detached, port id and priority, actor
-information, and partner information.
+information, and partner information. If \fIport\fR is not specified,
+then displays detailed information about all interfaces with CFM
+enabled.
.
+.so ofproto/ofproto-dpif-unixctl.man
.so ofproto/ofproto-unixctl.man
.so lib/vlog-unixctl.man
+.so lib/memory-unixctl.man
.so lib/stress-unixctl.man
+.
+.SH "LIMITS"
+.
+.PP
+We believe these limits to be accurate as of this writing. These
+limits assume the use of the Linux kernel datapath.
+.
+.IP \(bu
+Approximately 256 bridges given the allowance of 5,000 file
+descriptors that \fBovs\-ctl\fR(8) configures. (\fBovs\-vswitchd\fR
+requires 17 file descriptors per datapath.)
+.
+.IP \(bu
+65,280 ports per bridge. Performance will degrade beyond 1,024 ports
+per bridge due to fixed hash table sizing.
+.
+.IP \(bu
+2,048 MAC learning entries per bridge.
+.
+.IP \(bu
+Kernel flows are limited only by memory available to the kernel.
+Performance will degrade beyond 1,048,576 kernel flows per bridge with
+a 32-bit kernel, beyond 262,144 with a 64-bit kernel.
+(\fBovs\-vswitchd\fR should never install anywhere near that many
+flows.)
+.
+.IP \(bu
+OpenFlow flows are limited only by available memory. Performance is
+linear in the number of unique wildcard patterns. That is, an
+OpenFlow table that contains many flows that all match on the same
+fields in the same way has a constant-time lookup, but a table that
+contains many flows that match on different fields requires lookup
+time linear in the number of flows.
+.
+.IP \(bu
+255 ports per bridge participating in 802.1D Spanning Tree Protocol.
+.
+.IP \(bu
+32 mirrors per bridge.
+.
+.IP \(bu
+15 bytes for the name of a port. (This is a Linux kernel limitation.)
+.
.SH "SEE ALSO"
.BR ovs\-appctl (8),
-.BR ovs\-brcompatd (8),
.BR ovsdb\-server (1),
\fBINSTALL.Linux\fR in the Open vSwitch distribution.
git://git.onelab.eu / sliver-openvswitch.git / blobdiff