Merge citrix into master.

[sliver-openvswitch.git] / vswitchd / ovs-vswitchd.conf.5.in

diff --git a/vswitchd/ovs-vswitchd.conf.5.in b/vswitchd/ovs-vswitchd.conf.5.in
index 7599355..0dbf94d 100644 (file)
--- a/vswitchd/ovs-vswitchd.conf.5.in
+++ b/vswitchd/ovs-vswitchd.conf.5.in
@@ -71,11 +71,23 @@ in the bridge, by specifying it as one of the values for key
 included, then its MAC address is by default the lowest-numbered MAC
 address among the other bridge ports, ignoring other internal ports
 and bridge ports that are
-used as port mirroring destinations (see \fBPort Mirroring\fR, below).  To
-use a specific MAC address instead, set \fBbridge.\fIname\fB.mac\fR to
-a MAC address in the format
+used as port mirroring destinations (see \fBPort Mirroring\fR, below).
+For this purpose, the MAC of a bonded port (see \fBNetwork Device
+Bonding\fR, below) is by default the MAC of its slave whose name is first in
+alphabetical order.
+There are two ways to modify this algorithm for selecting the MAC
+address of the local port:
+.IP \(bu
+To use a specific MAC address for the local port, set
+\fBbridge.\fIname\fB.mac\fR to a MAC address in the format
 \fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR, where each
-\fIx\fR is a hex digit.  If no valid MAC address can be determined
+\fIx\fR is a hex digit.
+.IP \(bu
+To override the MAC of a port for the purpose of this algorithm, set
+\fBport.\fIport\fB.mac\fR to a MAC address in the format described
+above.
+.PP
+If no valid MAC address can be determined
 either of these ways, then a MAC address is randomly generated.
 .PP
 The following syntax defines a bridge named \fBmybr\fR, configured
@@ -317,8 +329,9 @@ NetFlow is a protocol that exports a number of details about terminating
 IP flows, such as the principals involved and duration.  A bridge may be 
 configured to send NetFlow v5 records to NetFlow collectors when flows 
 end.  To enable, define the key \fBnetflow.\fIbridge\fB.host\fR for each 
-collector in the form \fIhost\fB:\fIport\fR.  Records from \fIbridge\fR 
-will be sent to each \fIhost\fR on UDP \fIport\fR.
+collector in the form \fIip\fB:\fIport\fR.  Records from \fIbridge\fR 
+will be sent to each \fIip\fR on UDP \fIport\fR.  The \fIip\fR must
+be specified numerically, not as a DNS name.
 
 The NetFlow messages will use the datapath index for the engine type and id.  
 This can be overridden with the \fBnetflow.\fIbridge\fB.engine-type\fR and 
@@ -350,20 +363,19 @@ supports the OpenFlow Management Protocol, such as NOX.  This
 functionality is enabled by setting the key \fBmgmt.controller\fR to one 
 of the following values:
 .
-.TP
-\fBssl:\fIhost\fR[\fB:\fIport\fR]
-The specified SSL \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.  SSL must be configured when this form is used (see \fBSSL
+.IP "\fBssl:\fIip\fR[\fB:\fIport\fR]"
+The specified SSL \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
+SSL must be configured when this form is used (see \fBSSL
 Configuration\fR, below).
 .
-.TP
-\fBtcp:\fIhost\fR[\fB:\fIport\fR]
-The specified TCP \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.
+.IP "\fBtcp:\fIip\fR[\fB:\fIport\fR]"
+The specified TCP \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
 .PP
 The maximum time between attempts to connect to the controller may be
 specified in integral seconds with the \fBmgmt.max-backoff\fR key.  The
-default maximum backoff is 15 seconds, and the minimum value is 1
+default maximum backoff is 8 seconds, and the minimum value is 1
 second.
 
 An inactivity probe may be configured with the \fBmgmt.inactivity-probe\fR
@@ -371,7 +383,7 @@ key.  If \fBovs\-vswitchd\fR does not communicate with the controller for the
 specified number of seconds, it will send a probe.  If a response is not
 received for an additional amount of that time, \fBovs\-vswitchd\fR assumes
 the connection has been broken and attempts to reconnect.  The default
-is 15 seconds, and the minimum value is 5 seconds.
+and minimum values are both 5 seconds.
 
 A management id may be specified with the \fBmgmt.id\fR key.  It takes
 an id in the form of exactly 12 hexadecimal digits.  If one is not
@@ -430,15 +442,16 @@ that it receives specifies one or more DNS servers.
 .RE
 .
 .TP
-\fBssl:\fIhost\fR[\fB:\fIport\fR]
-The specified SSL \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.  SSL must be configured when this form is used (see \fBSSL
+\fBssl:\fIip\fR[\fB:\fIport\fR]
+The specified SSL \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
+SSL must be configured when this form is used (see \fBSSL
 Configuration\fR, below).
 .
 .TP
-\fBtcp:\fIhost\fR[\fB:\fIport\fR]
-The specified TCP \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.
+\fBtcp:\fIip\fR[\fB:\fIport\fR]
+The specified TCP \fIport\fR (default: 6633) on the host at the given
+\fIip\fR, which must be expressed as an IP address (not a DNS name).
 .
 .TP
 \fBunix:\fIfile\fR