.SS "Bridge Configuration"
A bridge (switch) with a given \fIname\fR is configured by specifying
the names of its network devices as values for key
-\fBbridge.\fIname\fB.port\fR. (The specified \fIname\fR may not begin
-with \fBdp\fR or \fBnl:\fR followed by a digit.)
+\fBbridge.\fIname\fB.port\fR.
.PP
The names given on \fBbridge.\fIname\fB.port\fR must be the names of
existing network devices, except for ``internal ports.'' An internal
.TP
\fBdiscover\fR
Use controller discovery to find the local OpenFlow controller.
-Refer to \fBsecchan\fR(8) for information on how to configure a DHCP
+Refer to \fB\ovs\-openflowd\fR(8) for information on how to configure a DHCP
server to support controller discovery. The following additional
options control the discovery process:
.
By default, or if this is set to \fBtrue\fR, \fBovs\-vswitchd\fR connects
to the controller in-band. If this is set to \fBfalse\fR,
\fBovs\-vswitchd\fR connects to the controller out-of-band. Refer to
-\fBsecchan\fR(8) for a description of in-band and out-of-band control.
+\fBovs\-openflowd\fR(8) for a description of in-band and out-of-band control.
.IP "\fBbridge.\fIname\fB.controller.ip=\fIip\fR"
If specified, the IP address to configure on the bridge's local port.
.IP "\fBbridge.\fIname\fB.controller.netmask=\fInetmask\fR"
message to be received from the controller for \fIsecs\fR seconds
before it sends a inactivity probe to the controller. After sending
the inactivity probe, if no response is received for an additional
-\fIsecs\fR seconds, the secure channel assumes that the connection has
+\fIsecs\fR seconds, \fBovs-vswitchd\fR assumes that the connection has
been broken and attempts to reconnect.
.IP
Changing the inactivity probe interval also changes the interval