Disabling learning for the VLAN will cause the switch to correctly
send the packet out all ports configured for that VLAN. If Open
vSwitch is being used as an intermediate switch learning can be disabled
-by setting the key \fBvlan.\fIbrname\fB.learning-disable=\fIvid\fR
+by setting the key \fBvlan.\fIbrname\fB.disable-learning=\fIvid\fR
to the mirrored VLAN.
.ST "Example"
The following \fBovs\-vswitchd\fR configuration copies all frames received
and minimum values are both 5 seconds.
A management id may be specified with the \fBmgmt.id\fR key. It takes
-an id in the form of exactly 12 hexadecimal digits. If one is not
+an id in the form of exactly 16 hexadecimal digits. If one is not
specified, a random id is generated each time \fBovs\-vswitchd\fR is started.
.fi
.RE
.PP
The datapath ID used by the bridge to identify itself to the remote
controller may be specified as \fBbridge.\fIname\fB.datapath-id\fR,
-in the form of exactly 12 hexadecimal digits. If the datapath ID
-is not specified, then it defaults to the bridge's MAC address (see
-\fBBridge Configuration\fR, above, for information on how the bridge's
-MAC address is chosen).
+in the form of exactly 16 hexadecimal digits. If the datapath ID
+is not specified, then it defaults to the bridge's MAC address in
+the lower 48 bits (see \fBBridge Configuration\fR, above, for information
+on how the bridge's MAC address is chosen) and zeros in the upper 16
+bits.
.ST "Local Port Network Configuration"
When an external controller is configured, but controller discovery is
not in use, the following additional settings are honored: