-.\" Creator: Graphviz version 2.20.2 (Sun Oct 12 22:28:10 UTC 2008)
-.\" For: (blp) Ben Pfaff,,,
-.\" Title: Open_vSwitch
-.\" save point size and font
-.nr .S \n(.s
-.nr DF \n(.f
-.PS 6.50000 3.59722
-# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
-.nr SF 6500
-scalethickness = 6500
-# don't change anything below this line in this drawing
-# non-fatal run-time pic version determination, version 2
-boxrad=2.0 # will be reset to 0.0 by gpic only
-scale=1.0 # required for comparisons
-# boxrad is now 0.0 in gpic, else it remains 2.0
-# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
-# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
-# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
-# DWB 2 doesn't use fill and doesn't define fillval
-# reset works in gpic and 10th edition, but isn't defined in DWB 2
-# DWB 2 compatibility definitions
-if boxrad > 1.0 && dashwid < 0.075 then X
- fillval = 1;
- define fill Y Y;
- define solid Y Y;
- define reset Y scale=1.0 Y;
-X
-reset # set to known state
-# GNU pic vs. 10th Edition d\(e'tente
-if fillval > 0.4 then X
- define setfillval Y fillval = 1 - Y;
- define bold Y thickness 2 Y;
- # if you use gpic and it barfs on encountering "solid",
- # install a more recent version of gpic or switch to DWB or 10th Edition pic;
- # sorry, the groff folks changed gpic; send any complaint to them;
-X else Z
- define setfillval Y fillval = Y;
- define bold Y Y;
- define filled Y fill Y;
-Z
-# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
-# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
-arrowhead = 7 # not used by graphviz
-# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
-boxrad = 0 # no rounded corners in graphviz
-# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
-linethick = 1; oldlinethick = linethick
-# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
-# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
-# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
-maxpsht = 3.597222
-maxpswid = 6.500000
-Dot: [
-define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
-setfillval 0.000000
-setfillval 0.827451
-.ft R
-.ps 8*\n(SFu/6500u
-setfillval 1.000000
-setfillval 1.000000
-setfillval 1.000000
-{
-define attrs1 % %
-# Bridge
-setfillval 0.000000
-box attrs1 wid 0.53352 ht 0.32011 at (2.19631,2.56088);
-{
-define attrs2 % %
-setfillval 0.000000
-"Bridge" at (2.19631,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# sFlow
-setfillval 0.000000
-box attrs1 wid 0.49795 ht 0.32011 at (0.24897,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"sFlow" at (0.24897,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> sFlow
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.92955,2.52531)
-P1: (1.84522,2.51062)
-P2: (1.75320,2.49315)
-P3: (1.65489,2.47281)
-P4: (1.55168,2.44948)
-P5: (1.44494,2.42305)
-P6: (1.33607,2.39342)
-P7: (1.22645,2.36049)
-P8: (1.11747,2.32414)
-P9: (1.01051,2.28427)
-P10: (0.90698,2.24077)
-P11: (0.86432,2.21866)
-P12: (0.82183,2.19517)
-P13: (0.77965,2.17050)
-P14: (0.73796,2.14488)
-P15: (0.69690,2.11850)
-P16: (0.65665,2.09160)
-P17: (0.61736,2.06437)
-P18: (0.57918,2.03703)
-P19: (0.54229,2.00981)
-P20: (0.50684,1.98290)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (0.52462,1.95622)
-P1: (0.43570,1.92066)
-P2: (0.48016,2.00068)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"sflow" at (1.12483,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror
-setfillval 0.000000
-box attrs1 wid 0.51573 ht 0.32011 at (1.73393,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"Mirror" at (1.73393,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> Mirror
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.09850,2.40082)
-P1: (2.08807,2.38482)
-P2: (2.07808,2.36881)
-P3: (2.06840,2.35280)
-P4: (2.05894,2.33680)
-P5: (2.04959,2.32079)
-P6: (2.04024,2.30479)
-P7: (2.03077,2.28878)
-P8: (2.02110,2.27278)
-P9: (2.01111,2.25677)
-P10: (2.00068,2.24077)
-P11: (1.98735,2.21676)
-P12: (1.97401,2.19275)
-P13: (1.96067,2.16874)
-P14: (1.94733,2.14473)
-P15: (1.93399,2.12073)
-P16: (1.92066,2.09672)
-P17: (1.90732,2.07271)
-P18: (1.89398,2.04870)
-P19: (1.88064,2.02469)
-P20: (1.86731,2.00068)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (1.89398,1.98290)
-P1: (1.82285,1.92066)
-P2: (1.84063,2.00958)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"mirrors" at (2.24966,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Port
-setfillval 0.000000
-box attrs1 wid 0.48016 ht 0.32011 at (3.31669,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"Port" at (3.31224,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.37415,2.40082)
-P1: (2.40743,2.37073)
-P2: (2.44300,2.33936)
-P3: (2.48050,2.30703)
-P4: (2.51955,2.27406)
-P5: (2.55976,2.24077)
-P6: (2.60078,2.20747)
-P7: (2.64223,2.17450)
-P8: (2.68373,2.14217)
-P9: (2.72490,2.11080)
-P10: (2.76539,2.08071)
-P11: (2.78699,2.06471)
-P12: (2.80907,2.04877)
-P13: (2.83157,2.03294)
-P14: (2.85445,2.01726)
-P15: (2.87765,2.00180)
-P16: (2.90112,1.98660)
-P17: (2.92480,1.97172)
-P18: (2.94863,1.95722)
-P19: (2.97258,1.94314)
-P20: (2.99658,1.92955)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.01436,1.95622)
-P1: (3.07661,1.88509)
-P2: (2.98769,1.90287)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"ports" at (2.92100,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Controller
-setfillval 0.000000
-box attrs1 wid 0.74692 ht 0.32011 at (4.09029,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"Controller" at (4.08584,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> Controller
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.46306,2.48085)
-P1: (2.51818,2.46164)
-P2: (2.57638,2.44137)
-P3: (2.63704,2.42003)
-P4: (2.69952,2.39762)
-P5: (2.76317,2.37415)
-P6: (2.82735,2.34960)
-P7: (2.89142,2.32399)
-P8: (2.95475,2.29732)
-P9: (3.01669,2.26958)
-P10: (3.07661,2.24077)
-P11: (3.11337,2.22284)
-P12: (3.14447,2.20619)
-P13: (3.17120,2.19051)
-P14: (3.19483,2.17546)
-P15: (3.21666,2.16074)
-P16: (3.23794,2.14601)
-P17: (3.25998,2.13097)
-P18: (3.28404,2.11528)
-P19: (3.31141,2.09864)
-P20: (3.34337,2.08071)
-P21: (3.37271,2.06713)
-P22: (3.40205,2.05318)
-P23: (3.43140,2.03902)
-P24: (3.46074,2.02480)
-P25: (3.49008,2.01069)
-P26: (3.51943,1.99684)
-P27: (3.54877,1.98342)
-P28: (3.57811,1.97059)
-P29: (3.60746,1.95851)
-P30: (3.63680,1.94733)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-move to P20; line attrs1 to P21 then to P22
-move to P22; line attrs1 to P23 then to P24
-move to P24; line attrs1 to P25 then to P26
-move to P26; line attrs1 to P27 then to P28
-move to P28; line attrs1 to P29 then to P30
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.64569,1.97401)
-P1: (3.71683,1.91176)
-P2: (3.61902,1.92066)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"controller" at (3.63680,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# NetFlow
-setfillval 0.000000
-box attrs1 wid 0.65800 ht 0.32011 at (0.98700,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"NetFlow" at (0.98700,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> NetFlow
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.92955,2.48085)
-P1: (1.88055,2.46404)
-P2: (1.82989,2.44564)
-P3: (1.77806,2.42563)
-P4: (1.72553,2.40402)
-P5: (1.67279,2.38081)
-P6: (1.62032,2.35601)
-P7: (1.56860,2.32960)
-P8: (1.51810,2.30159)
-P9: (1.46931,2.27198)
-P10: (1.42271,2.24077)
-P11: (1.39363,2.21891)
-P12: (1.36509,2.19609)
-P13: (1.33708,2.17242)
-P14: (1.30960,2.14801)
-P15: (1.28266,2.12295)
-P16: (1.25625,2.09736)
-P17: (1.23038,2.07134)
-P18: (1.20503,2.04500)
-P19: (1.18023,2.01845)
-P20: (1.15595,1.99179)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (1.18263,1.97401)
-P1: (1.10260,1.92066)
-P2: (1.12927,2.00958)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"netflow" at (1.71170,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.79617,1.60055)
-P1: (1.81565,1.56758)
-P2: (1.83679,1.53318)
-P3: (1.85963,1.49803)
-P4: (1.88424,1.46283)
-P5: (1.91065,1.42827)
-P6: (1.93894,1.39504)
-P7: (1.96914,1.36384)
-P8: (2.00132,1.33535)
-P9: (2.03553,1.31029)
-P10: (2.07182,1.28933)
-P11: (2.17646,1.23651)
-P12: (2.27299,1.19543)
-P13: (2.36344,1.16609)
-P14: (2.44983,1.14848)
-P15: (2.53420,1.14261)
-P16: (2.61857,1.14848)
-P17: (2.70496,1.16609)
-P18: (2.79541,1.19543)
-P19: (2.89194,1.23651)
-P20: (2.99658,1.28933)
-P21: (3.02512,1.30421)
-P22: (3.05207,1.32191)
-P23: (3.07741,1.34207)
-P24: (3.10115,1.36431)
-P25: (3.12329,1.38825)
-P26: (3.14383,1.41353)
-P27: (3.16277,1.43977)
-P28: (3.18011,1.46660)
-P29: (3.19585,1.49364)
-P30: (3.20999,1.52052)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-move to P20; line attrs1 to P21 then to P22
-move to P22; line attrs1 to P23 then to P24
-move to P24; line attrs1 to P25 then to P26
-move to P26; line attrs1 to P27 then to P28
-move to P28; line attrs1 to P29 then to P30
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.18331,1.53830)
-P1: (3.25445,1.60055)
-P2: (3.23666,1.51163)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"select_src_port" at (2.52975,1.35750);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.99179,1.76060)
-P1: (2.07850,1.76060)
-P2: (2.17219,1.76060)
-P3: (2.27133,1.76060)
-P4: (2.37436,1.76060)
-P5: (2.47974,1.76060)
-P6: (2.58592,1.76060)
-P7: (2.69135,1.76060)
-P8: (2.79448,1.76060)
-P9: (2.89378,1.76060)
-P10: (2.98769,1.76060)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.98769,1.79617)
-P1: (3.07661,1.76060)
-P2: (2.98769,1.73393)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"output_port" at (2.52975,1.82877);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.99179,1.60055)
-P1: (1.99979,1.59788)
-P2: (2.00780,1.59521)
-P3: (2.01580,1.59254)
-P4: (2.02380,1.58988)
-P5: (2.03181,1.58721)
-P6: (2.03981,1.58454)
-P7: (2.04781,1.58187)
-P8: (2.05581,1.57921)
-P9: (2.06382,1.57654)
-P10: (2.07182,1.57387)
-P11: (2.17501,1.54698)
-P12: (2.26780,1.52521)
-P13: (2.35312,1.50889)
-P14: (2.43390,1.49833)
-P15: (2.51308,1.49384)
-P16: (2.59360,1.49576)
-P17: (2.67838,1.50441)
-P18: (2.77037,1.52009)
-P19: (2.87249,1.54314)
-P20: (2.98769,1.57387)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.97880,1.60055)
-P1: (3.07661,1.60055)
-P2: (2.99658,1.54720)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"select_dst_port" at (2.53420,1.64204);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# QoS
-setfillval 0.000000
-box attrs1 wid 0.48016 ht 0.32011 at (2.77428,0.96033);
-{
-define attrs2 % %
-setfillval 0.000000
-"QoS" at (2.76984,0.95736);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Port -> QoS
-setfillval 0.000000
-setfillval 0.000000
-P0: (3.20999,1.60055)
-P1: (3.18522,1.56461)
-P2: (3.15912,1.52642)
-P3: (3.13196,1.48643)
-P4: (3.10399,1.44505)
-P5: (3.07550,1.40270)
-P6: (3.04673,1.35982)
-P7: (3.01797,1.31684)
-P8: (2.98947,1.27418)
-P9: (2.96150,1.23226)
-P10: (2.93434,1.19152)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.96101,1.17373)
-P1: (2.88098,1.12038)
-P2: (2.90766,1.20930)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"qos" at (3.20554,1.35750);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Interface
-setfillval 0.000000
-box attrs1 wid 0.69357 ht 0.32011 at (3.52120,0.96033);
-{
-define attrs2 % %
-setfillval 0.000000
-"Interface" at (3.52120,0.95736);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Port -> Interface
-setfillval 0.000000
-setfillval 0.000000
-P0: (3.36115,1.60055)
-P1: (3.36941,1.56486)
-P2: (3.37815,1.52742)
-P3: (3.38732,1.48859)
-P4: (3.39686,1.44874)
-P5: (3.40672,1.40826)
-P6: (3.41685,1.36751)
-P7: (3.42719,1.32686)
-P8: (3.43769,1.28670)
-P9: (3.44830,1.24739)
-P10: (3.45896,1.20930)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.48564,1.20930)
-P1: (3.47674,1.12038)
-P2: (3.43228,1.20041)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"interfaces" at (3.75239,1.35750);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Queue
-setfillval 0.000000
-box attrs1 wid 0.55130 ht 0.32011 at (2.77428,0.16005);
-{
-define attrs2 % %
-setfillval 0.000000
-"Queue" at (2.77428,0.15709);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# QoS -> Queue
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.77428,0.80027)
-P1: (2.77428,0.76483)
-P2: (2.77428,0.72800)
-P3: (2.77428,0.69000)
-P4: (2.77428,0.65103)
-P5: (2.77428,0.61132)
-P6: (2.77428,0.57108)
-P7: (2.77428,0.53051)
-P8: (2.77428,0.48984)
-P9: (2.77428,0.44927)
-P10: (2.77428,0.40903)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.80985,0.40903)
-P1: (2.77428,0.32011)
-P2: (2.74761,0.40903)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"queues value" at (3.18331,0.55723);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch
-setfillval 0.000000
-box attrs1 wid 1.03146 ht 0.32011 at (4.49042,3.36115);
-{
-define attrs2 % %
-setfillval 0.000000
-"Open_vSwitch" at (4.49042,3.35819);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> Bridge
-setfillval 0.000000
-setfillval 0.000000
-P0: (3.97469,3.20109)
-P1: (3.92643,3.18509)
-P2: (3.87773,3.16908)
-P3: (3.82872,3.15308)
-P4: (3.77950,3.13707)
-P5: (3.73016,3.12107)
-P6: (3.68083,3.10506)
-P7: (3.63161,3.08906)
-P8: (3.58259,3.07305)
-P9: (3.53390,3.05705)
-P10: (3.48564,3.04104)
-P11: (3.38867,3.00613)
-P12: (3.29037,2.97090)
-P13: (3.19154,2.93556)
-P14: (3.09297,2.90033)
-P15: (2.99547,2.86542)
-P16: (2.89984,2.83105)
-P17: (2.80687,2.79742)
-P18: (2.71737,2.76475)
-P19: (2.63214,2.73325)
-P20: (2.55198,2.70315)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.56088,2.66758)
-P1: (2.46306,2.66758)
-P2: (2.53420,2.72982)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"bridges" at (3.76129,2.95805);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> Controller
-setfillval 0.000000
-setfillval 0.000000
-P0: (4.36594,3.20109)
-P1: (4.34122,3.16220)
-P2: (4.31543,3.12043)
-P3: (4.28911,3.07609)
-P4: (4.26279,3.02952)
-P5: (4.23700,2.98102)
-P6: (4.21228,2.93092)
-P7: (4.18917,2.87954)
-P8: (4.16818,2.82721)
-P9: (4.14986,2.77423)
-P10: (4.13475,2.72093)
-P11: (4.11548,2.64795)
-P12: (4.10010,2.57354)
-P13: (4.08825,2.49837)
-P14: (4.07955,2.42316)
-P15: (4.07361,2.34858)
-P16: (4.07008,2.27534)
-P17: (4.06858,2.20412)
-P18: (4.06873,2.13563)
-P19: (4.07016,2.07055)
-P20: (4.07250,2.00958)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (4.10807,2.00958)
-P1: (4.07250,1.92066)
-P2: (4.04583,2.00958)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"controller" at (4.42818,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Capability
-setfillval 0.000000
-box attrs1 wid 0.74692 ht 0.32011 at (5.17510,2.56088);
-{
-define attrs2 % %
-setfillval 0.000000
-"Capability" at (5.17510,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> Capability
-setfillval 0.000000
-setfillval 0.000000
-P0: (4.63269,3.20109)
-P1: (4.66305,3.16515)
-P2: (4.69522,3.12697)
-P3: (4.72889,3.08698)
-P4: (4.76373,3.04559)
-P5: (4.79942,3.00325)
-P6: (4.83564,2.96037)
-P7: (4.87208,2.91739)
-P8: (4.90842,2.87473)
-P9: (4.94432,2.83281)
-P10: (4.97948,2.79207)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (5.00616,2.80985)
-P1: (5.03283,2.72093)
-P2: (4.95280,2.77428)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"capabilities value" at (5.41518,2.95805);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# SSL
-setfillval 0.000000
-box attrs1 wid 0.48016 ht 0.32011 at (6.18878,2.56088);
-{
-define attrs2 % %
-setfillval 0.000000
-"SSL" at (6.18878,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> SSL
-setfillval 0.000000
-setfillval 0.000000
-P0: (5.00616,3.29891)
-P1: (5.11780,3.28184)
-P2: (5.23244,3.26270)
-P3: (5.34771,3.24153)
-P4: (5.46128,3.21838)
-P5: (5.57079,3.19331)
-P6: (5.67390,3.16638)
-P7: (5.76827,3.13763)
-P8: (5.85153,3.10712)
-P9: (5.92135,3.07491)
-P10: (5.97538,3.04104)
-P11: (5.99617,3.02160)
-P12: (6.01585,3.00078)
-P13: (6.03436,2.97878)
-P14: (6.05163,2.95582)
-P15: (6.06763,2.93211)
-P16: (6.08229,2.90787)
-P17: (6.09557,2.88331)
-P18: (6.10740,2.85865)
-P19: (6.11774,2.83409)
-P20: (6.12654,2.80985)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (6.15321,2.81874)
-P1: (6.15321,2.72093)
-P2: (6.09986,2.80096)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"ssl" at (6.14877,2.95805);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-]
+.\" Generated from vswitch.gv with cksum "2412173910 1224"
+.PS
+linethick = 1;
+linethick = 1;
+box at 1.639964024,1.91216 wid 0.4050050488 height 0.23902 "Bridge"
+linethick = 1;
+box at 5.72978744,1.31461 wid 0.3718099512 height 0.23902 "sFlow"
+linethick = 1;
+box at 6.22790512,1.31461 wid 0.3917250976 height 0.23902 "Mirror"
+linethick = 1;
+box at 0.2589399268,1.31461 wid 0.35853 height 0.23902 "IPFIX"
+linethick = 1;
+box at 0.736994268,1.31461 wid 0.35853 height 0.23902 "Port"
+linethick = 1;
+box at 1.321254756,1.31461 wid 0.570970976 height 0.23902 "Controller"
+linethick = 1;
+box at 2.03167,1.31461 wid 0.610839512 height 0.23902 "Flow_Table"
+linethick = 1;
+box at 5.17191476,1.31461 wid 0.491329512 height 0.23902 "NetFlow"
+linethick = 0.5;
+box at 0.35853,0.71706 wid 0.35853 height 0.23902 "QoS"
+box at 0.35853,0.71706 wid 0.302974444444444 height 0.183464444444444
+linethick = 0.5;
+box at 0.35853,0.11951 wid 0.4116450244 height 0.23902 "Queue"
+box at 0.35853,0.11951 wid 0.356089468844444 height 0.183464444444444
+linethick = 0.5;
+box at 0.683884024,2.50971 wid 1.367720244 height 0.23902 "Flow_Sample_Collector_Set"
+box at 0.683884024,2.50971 wid 1.31216468844444 height 0.183464444444444
+linethick = 0.5;
+box at 2.177759024,2.50971 wid 0.770170244 height 0.23902 "Open_vSwitch"
+box at 2.177759024,2.50971 wid 0.714614688444444 height 0.183464444444444
+linethick = 1;
+box at 2.177759024,1.91216 wid 0.35853 height 0.23902 "SSL"
+linethick = 1;
+box at 2.728795732,1.91216 wid 0.511215976 height 0.23902 "Manager"
+linethick = 1;
+box at 0.916259268,0.71706 wid 0.517860732 height 0.23902 "Interface"
+linethick = 1;
+spline -> from 1.83949792,1.821380204 to 1.83949792,1.821380204 to 1.872052444,1.809763832 to 1.905897676,1.799533776 to 1.938739024,1.79265 to 2.331687904,1.7101881 to 5.21254816,1.889883336 to 5.55052244,1.67314 to 5.63322336,1.620173168 to 5.6791152,1.516773116 to 5.70397328,1.43459804
+"sflow?" at 5.80627384,1.613385
+linethick = 1;
+spline -> from 1.839450116,1.821284596 to 1.839450116,1.821284596 to 1.872052444,1.809668224 to 1.905897676,1.799485972 to 1.938739024,1.79265 to 2.378774844,1.701153144 to 5.58780956,1.888544824 to 5.98219256,1.67314 to 6.07541036,1.622133132 to 6.1404238,1.518541864 to 6.18010112,1.43579314
+"mirrors*" at 6.30725976,1.613385
+linethick = 1;
+spline -> from 1.44033452,1.898966096 to 1.44033452,1.898966096 to 1.223830204,1.877406492 to 0.873952728,1.820806556 to 0.610839512,1.67314 to 0.505861928,1.614245472 to 0.4118171188,1.51466974 to 0.3474107896,1.435362904
+"ipfix?" at 0.733647988,1.613385
+linethick = 1;
+spline -> from 1.439569656,1.871861228 to 1.439569656,1.871861228 to 1.302372176,1.836725288 to 1.12195988,1.775010324 to 0.989255976,1.67314 to 0.907176508,1.610086524 to 0.84111138,1.512853188 to 0.797179504,1.43555412
+"ports*" at 1.132046524,1.613385
+linethick = 1;
+spline -> from 1.43842236,1.800203032 to 1.43842236,1.800203032 to 1.39420366,1.765545132 to 1.353140024,1.72309518 to 1.327899512,1.67314 to 1.291090432,1.600334508 to 1.29022996,1.508168396 to 1.298165424,1.435506316
+"controller*" at 1.573564268,1.613385
+linethick = 1;
+spline -> from 1.733755472,1.79241098 to 1.733755472,1.79241098 to 1.76205544,1.754837036 to 1.792697804,1.71281732 to 1.819229024,1.67314 to 1.870666128,1.596127756 to 1.923776372,1.506495256 to 1.96402734,1.436127768
+"flow_tables value*" at 2.327146524,1.613385
+linethick = 1;
+spline -> from 1.83949792,1.821523616 to 1.83949792,1.821523616 to 1.872100248,1.809907244 to 1.90594548,1.799629384 to 1.938739024,1.79265 to 2.27451432,1.721230824 to 4.744929432,1.870188088 to 5.02611256,1.67314 to 5.103077,1.61912148 to 5.13940804,1.516964332 to 5.15661748,1.435458512
+"netflow?" at 5.32154128,1.613385
+linethick = 0.5;
+spline -> from 6.03429892,1.412082356 to 6.03429892,1.412082356 to 6.01469928,1.420209036 to 5.9946216,1.427714264 to 5.9755,1.43412 to 5.56247344,1.571030656 to 5.44869992,1.583650912 to 5.01607372,1.626674512 to 4.690146048,1.65903782 to 4.606536852,1.636187508 to 4.279127256,1.626674512 to 2.80920206,1.583842128 to 2.396749148,1.813492544 to 0.976014268,1.43412 to 0.956271216,1.42886156 to 0.936289144,1.421882176 to 0.916689504,1.413898908
+"select_src_port*" at 4.647600488,1.613385
+linethick = 0.5;
+spline -> from 6.03429892,1.412082356 to 6.03429892,1.412082356 to 6.01469928,1.420209036 to 5.9946216,1.427714264 to 5.9755,1.43412 to 5.56247344,1.571030656 to 5.44869992,1.583650912 to 5.01607372,1.626674512 to 4.690146048,1.65903782 to 4.606536852,1.636187508 to 4.279127256,1.626674512 to 2.80920206,1.583842128 to 2.396749148,1.813492544 to 0.976014268,1.43412 to 0.956271216,1.42886156 to 0.936289144,1.421882176 to 0.916689504,1.413898908
+"output_port?" at 4.647600488,1.613385
+linethick = 0.5;
+spline -> from 6.03429892,1.412082356 to 6.03429892,1.412082356 to 6.01469928,1.420209036 to 5.9946216,1.427714264 to 5.9755,1.43412 to 5.56247344,1.571030656 to 5.44869992,1.583650912 to 5.01607372,1.626674512 to 4.690146048,1.65903782 to 4.606536852,1.636187508 to 4.279127256,1.626674512 to 2.80920206,1.583842128 to 2.396749148,1.813492544 to 0.976014268,1.43412 to 0.956271216,1.42886156 to 0.936289144,1.421882176 to 0.916689504,1.413898908
+"select_dst_port*" at 4.647600488,1.613385
+linethick = 1;
+spline -> from 0.659121552,1.193092232 to 0.659121552,1.193092232 to 0.63507614,1.155470484 to 0.60854492,1.1138332 to 0.584260488,1.07559 to 0.533827268,0.996091948 to 0.4774089872,0.906459448 to 0.43358228,0.836713412
+"qos?" at 0.6871825,1.015835
+linethick = 1;
+spline -> from 0.773277504,1.19366588 to 0.773277504,1.19366588 to 0.804350104,1.090026808 to 0.848951236,0.941404172 to 0.880023836,0.837812904
+"interfaces+" at 1.108765976,1.015835
+linethick = 1;
+spline -> from 0.35853,0.59611588 to 0.35853,0.59611588 to 0.35853,0.492476808 to 0.35853,0.3438732936 to 0.35853,0.2402533432
+"queues value*" at 0.690480976,0.418285
+linethick = 1;
+spline -> from 0.877346812,2.38876588 to 0.877346812,2.38876588 to 1.043226692,2.285126808 to 1.280955984,2.136504172 to 1.446740256,2.032912904
+"bridge" at 1.390952988,2.210935
+linethick = 1;
+spline -> from 0.640764816,2.38852686 to 0.640764816,2.38852686 to 0.559115584,2.158876444 to 0.3827570672,1.66286214 to 0.3015046084,1.434311216
+"ipfix?" at 0.640717012,1.91216
+linethick = 1;
+spline -> from 1.906375716,2.389148312 to 1.906375716,2.389148312 to 1.85455618,2.356545984 to 1.804553196,2.317155488 to 1.766070976,2.27069 to 1.70971006,2.2025693 to 1.677776988,2.107534948 to 1.660185116,2.032434864
+"bridges*" at 1.958625488,2.210935
+linethick = 1;
+spline -> from 2.177759024,2.38876588 to 2.177759024,2.38876588 to 2.177759024,2.285126808 to 2.177759024,2.136504172 to 2.177759024,2.032912904
+"ssl?" at 2.260746768,2.210935
+linethick = 1;
+spline -> from 2.289237952,2.38876588 to 2.289237952,2.38876588 to 2.384845952,2.285126808 to 2.52190002,2.136504172 to 2.617460216,2.032912904
+"manager_options*" at 2.924696524,2.210935
.PE
-.\" restore point size and font
-.ps \n(.S
-.ft \n(DF
git://git.onelab.eu / sliver-openvswitch.git / blobdiff