-.\" Creator: Graphviz version 2.20.2 (Sun Oct 12 22:28:10 UTC 2008)
-.\" For: (blp) Ben Pfaff,,,
-.\" Title: Open_vSwitch
-.\" save point size and font
-.nr .S \n(.s
-.nr DF \n(.f
-.PS 6.50000 3.59722
-# to change drawing size, multiply the width and height on the .PS line above and the number on the two lines below (rounded to the nearest integer) by a scale factor
-.nr SF 6500
-scalethickness = 6500
-# don't change anything below this line in this drawing
-# non-fatal run-time pic version determination, version 2
-boxrad=2.0 # will be reset to 0.0 by gpic only
-scale=1.0 # required for comparisons
-# boxrad is now 0.0 in gpic, else it remains 2.0
-# dashwid is 0.1 in 10th Edition, 0.05 in DWB 2 and in gpic
-# fillval is 0.3 in 10th Edition (fill 0 means black), 0.5 in gpic (fill 0 means white), undefined in DWB 2
-# fill has no meaning in DWB 2, gpic can use fill or filled, 10th Edition uses fill only
-# DWB 2 doesn't use fill and doesn't define fillval
-# reset works in gpic and 10th edition, but isn't defined in DWB 2
-# DWB 2 compatibility definitions
-if boxrad > 1.0 && dashwid < 0.075 then X
- fillval = 1;
- define fill Y Y;
- define solid Y Y;
- define reset Y scale=1.0 Y;
-X
-reset # set to known state
-# GNU pic vs. 10th Edition d\(e'tente
-if fillval > 0.4 then X
- define setfillval Y fillval = 1 - Y;
- define bold Y thickness 2 Y;
- # if you use gpic and it barfs on encountering "solid",
- # install a more recent version of gpic or switch to DWB or 10th Edition pic;
- # sorry, the groff folks changed gpic; send any complaint to them;
-X else Z
- define setfillval Y fillval = Y;
- define bold Y Y;
- define filled Y fill Y;
-Z
-# arrowhead has no meaning in DWB 2, arrowhead = 7 makes filled arrowheads in gpic and in 10th Edition
-# arrowhead is undefined in DWB 2, initially 1 in gpic, 2 in 10th Edition
-arrowhead = 7 # not used by graphviz
-# GNU pic supports a boxrad variable to draw boxes with rounded corners; DWB and 10th Ed. do not
-boxrad = 0 # no rounded corners in graphviz
-# GNU pic supports a linethick variable to set line thickness; DWB and 10th Ed. do not
-linethick = 1; oldlinethick = linethick
-# .PS w/o args causes GNU pic to scale drawing to fit 8.5x11 paper; DWB does not
-# maxpsht and maxpswid have no meaning in DWB 2.0, set page boundaries in gpic and in 10th Edition
-# maxpsht and maxpswid are predefined to 11.0 and 8.5 in gpic
-maxpsht = 3.597222
-maxpswid = 6.500000
-Dot: [
-define attrs0 % %; define unfilled % %; define rounded % %; define diagonals % %
-setfillval 0.000000
-setfillval 0.827451
-.ft R
-.ps 8*\n(SFu/6500u
-setfillval 1.000000
-setfillval 1.000000
-setfillval 1.000000
-{
-define attrs1 % %
-# Bridge
-setfillval 0.000000
-box attrs1 wid 0.53352 ht 0.32011 at (2.19631,2.56088);
-{
-define attrs2 % %
-setfillval 0.000000
-"Bridge" at (2.19631,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# sFlow
-setfillval 0.000000
-box attrs1 wid 0.49795 ht 0.32011 at (0.24897,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"sFlow" at (0.24897,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> sFlow
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.92955,2.52531)
-P1: (1.84522,2.51062)
-P2: (1.75320,2.49315)
-P3: (1.65489,2.47281)
-P4: (1.55168,2.44948)
-P5: (1.44494,2.42305)
-P6: (1.33607,2.39342)
-P7: (1.22645,2.36049)
-P8: (1.11747,2.32414)
-P9: (1.01051,2.28427)
-P10: (0.90698,2.24077)
-P11: (0.86432,2.21866)
-P12: (0.82183,2.19517)
-P13: (0.77965,2.17050)
-P14: (0.73796,2.14488)
-P15: (0.69690,2.11850)
-P16: (0.65665,2.09160)
-P17: (0.61736,2.06437)
-P18: (0.57918,2.03703)
-P19: (0.54229,2.00981)
-P20: (0.50684,1.98290)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (0.52462,1.95622)
-P1: (0.43570,1.92066)
-P2: (0.48016,2.00068)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"sflow" at (1.12483,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror
-setfillval 0.000000
-box attrs1 wid 0.51573 ht 0.32011 at (1.73393,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"Mirror" at (1.73393,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> Mirror
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.09850,2.40082)
-P1: (2.08807,2.38482)
-P2: (2.07808,2.36881)
-P3: (2.06840,2.35280)
-P4: (2.05894,2.33680)
-P5: (2.04959,2.32079)
-P6: (2.04024,2.30479)
-P7: (2.03077,2.28878)
-P8: (2.02110,2.27278)
-P9: (2.01111,2.25677)
-P10: (2.00068,2.24077)
-P11: (1.98735,2.21676)
-P12: (1.97401,2.19275)
-P13: (1.96067,2.16874)
-P14: (1.94733,2.14473)
-P15: (1.93399,2.12073)
-P16: (1.92066,2.09672)
-P17: (1.90732,2.07271)
-P18: (1.89398,2.04870)
-P19: (1.88064,2.02469)
-P20: (1.86731,2.00068)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (1.89398,1.98290)
-P1: (1.82285,1.92066)
-P2: (1.84063,2.00958)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"mirrors" at (2.24966,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Port
-setfillval 0.000000
-box attrs1 wid 0.48016 ht 0.32011 at (3.31669,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"Port" at (3.31224,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.37415,2.40082)
-P1: (2.40743,2.37073)
-P2: (2.44300,2.33936)
-P3: (2.48050,2.30703)
-P4: (2.51955,2.27406)
-P5: (2.55976,2.24077)
-P6: (2.60078,2.20747)
-P7: (2.64223,2.17450)
-P8: (2.68373,2.14217)
-P9: (2.72490,2.11080)
-P10: (2.76539,2.08071)
-P11: (2.78699,2.06471)
-P12: (2.80907,2.04877)
-P13: (2.83157,2.03294)
-P14: (2.85445,2.01726)
-P15: (2.87765,2.00180)
-P16: (2.90112,1.98660)
-P17: (2.92480,1.97172)
-P18: (2.94863,1.95722)
-P19: (2.97258,1.94314)
-P20: (2.99658,1.92955)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.01436,1.95622)
-P1: (3.07661,1.88509)
-P2: (2.98769,1.90287)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"ports" at (2.92100,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Controller
-setfillval 0.000000
-box attrs1 wid 0.74692 ht 0.32011 at (4.09029,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"Controller" at (4.08584,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> Controller
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.46306,2.48085)
-P1: (2.51818,2.46164)
-P2: (2.57638,2.44137)
-P3: (2.63704,2.42003)
-P4: (2.69952,2.39762)
-P5: (2.76317,2.37415)
-P6: (2.82735,2.34960)
-P7: (2.89142,2.32399)
-P8: (2.95475,2.29732)
-P9: (3.01669,2.26958)
-P10: (3.07661,2.24077)
-P11: (3.11337,2.22284)
-P12: (3.14447,2.20619)
-P13: (3.17120,2.19051)
-P14: (3.19483,2.17546)
-P15: (3.21666,2.16074)
-P16: (3.23794,2.14601)
-P17: (3.25998,2.13097)
-P18: (3.28404,2.11528)
-P19: (3.31141,2.09864)
-P20: (3.34337,2.08071)
-P21: (3.37271,2.06713)
-P22: (3.40205,2.05318)
-P23: (3.43140,2.03902)
-P24: (3.46074,2.02480)
-P25: (3.49008,2.01069)
-P26: (3.51943,1.99684)
-P27: (3.54877,1.98342)
-P28: (3.57811,1.97059)
-P29: (3.60746,1.95851)
-P30: (3.63680,1.94733)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-move to P20; line attrs1 to P21 then to P22
-move to P22; line attrs1 to P23 then to P24
-move to P24; line attrs1 to P25 then to P26
-move to P26; line attrs1 to P27 then to P28
-move to P28; line attrs1 to P29 then to P30
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.64569,1.97401)
-P1: (3.71683,1.91176)
-P2: (3.61902,1.92066)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"controller" at (3.63680,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# NetFlow
-setfillval 0.000000
-box attrs1 wid 0.65800 ht 0.32011 at (0.98700,1.76060);
-{
-define attrs2 % %
-setfillval 0.000000
-"NetFlow" at (0.98700,1.75764);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Bridge -> NetFlow
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.92955,2.48085)
-P1: (1.88055,2.46404)
-P2: (1.82989,2.44564)
-P3: (1.77806,2.42563)
-P4: (1.72553,2.40402)
-P5: (1.67279,2.38081)
-P6: (1.62032,2.35601)
-P7: (1.56860,2.32960)
-P8: (1.51810,2.30159)
-P9: (1.46931,2.27198)
-P10: (1.42271,2.24077)
-P11: (1.39363,2.21891)
-P12: (1.36509,2.19609)
-P13: (1.33708,2.17242)
-P14: (1.30960,2.14801)
-P15: (1.28266,2.12295)
-P16: (1.25625,2.09736)
-P17: (1.23038,2.07134)
-P18: (1.20503,2.04500)
-P19: (1.18023,2.01845)
-P20: (1.15595,1.99179)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (1.18263,1.97401)
-P1: (1.10260,1.92066)
-P2: (1.12927,2.00958)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"netflow" at (1.71170,2.15777);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.79617,1.60055)
-P1: (1.81565,1.56758)
-P2: (1.83679,1.53318)
-P3: (1.85963,1.49803)
-P4: (1.88424,1.46283)
-P5: (1.91065,1.42827)
-P6: (1.93894,1.39504)
-P7: (1.96914,1.36384)
-P8: (2.00132,1.33535)
-P9: (2.03553,1.31029)
-P10: (2.07182,1.28933)
-P11: (2.17646,1.23651)
-P12: (2.27299,1.19543)
-P13: (2.36344,1.16609)
-P14: (2.44983,1.14848)
-P15: (2.53420,1.14261)
-P16: (2.61857,1.14848)
-P17: (2.70496,1.16609)
-P18: (2.79541,1.19543)
-P19: (2.89194,1.23651)
-P20: (2.99658,1.28933)
-P21: (3.02512,1.30421)
-P22: (3.05207,1.32191)
-P23: (3.07741,1.34207)
-P24: (3.10115,1.36431)
-P25: (3.12329,1.38825)
-P26: (3.14383,1.41353)
-P27: (3.16277,1.43977)
-P28: (3.18011,1.46660)
-P29: (3.19585,1.49364)
-P30: (3.20999,1.52052)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-move to P20; line attrs1 to P21 then to P22
-move to P22; line attrs1 to P23 then to P24
-move to P24; line attrs1 to P25 then to P26
-move to P26; line attrs1 to P27 then to P28
-move to P28; line attrs1 to P29 then to P30
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.18331,1.53830)
-P1: (3.25445,1.60055)
-P2: (3.23666,1.51163)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"select_src_port" at (2.52975,1.35750);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.99179,1.76060)
-P1: (2.07850,1.76060)
-P2: (2.17219,1.76060)
-P3: (2.27133,1.76060)
-P4: (2.37436,1.76060)
-P5: (2.47974,1.76060)
-P6: (2.58592,1.76060)
-P7: (2.69135,1.76060)
-P8: (2.79448,1.76060)
-P9: (2.89378,1.76060)
-P10: (2.98769,1.76060)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.98769,1.79617)
-P1: (3.07661,1.76060)
-P2: (2.98769,1.73393)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"output_port" at (2.52975,1.82877);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Mirror -> Port
-setfillval 0.000000
-setfillval 0.000000
-P0: (1.99179,1.60055)
-P1: (1.99979,1.59788)
-P2: (2.00780,1.59521)
-P3: (2.01580,1.59254)
-P4: (2.02380,1.58988)
-P5: (2.03181,1.58721)
-P6: (2.03981,1.58454)
-P7: (2.04781,1.58187)
-P8: (2.05581,1.57921)
-P9: (2.06382,1.57654)
-P10: (2.07182,1.57387)
-P11: (2.17501,1.54698)
-P12: (2.26780,1.52521)
-P13: (2.35312,1.50889)
-P14: (2.43390,1.49833)
-P15: (2.51308,1.49384)
-P16: (2.59360,1.49576)
-P17: (2.67838,1.50441)
-P18: (2.77037,1.52009)
-P19: (2.87249,1.54314)
-P20: (2.98769,1.57387)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.97880,1.60055)
-P1: (3.07661,1.60055)
-P2: (2.99658,1.54720)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"select_dst_port" at (2.53420,1.64204);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# QoS
-setfillval 0.000000
-box attrs1 wid 0.48016 ht 0.32011 at (2.77428,0.96033);
-{
-define attrs2 % %
-setfillval 0.000000
-"QoS" at (2.76984,0.95736);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Port -> QoS
-setfillval 0.000000
-setfillval 0.000000
-P0: (3.20999,1.60055)
-P1: (3.18522,1.56461)
-P2: (3.15912,1.52642)
-P3: (3.13196,1.48643)
-P4: (3.10399,1.44505)
-P5: (3.07550,1.40270)
-P6: (3.04673,1.35982)
-P7: (3.01797,1.31684)
-P8: (2.98947,1.27418)
-P9: (2.96150,1.23226)
-P10: (2.93434,1.19152)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.96101,1.17373)
-P1: (2.88098,1.12038)
-P2: (2.90766,1.20930)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"qos" at (3.20554,1.35750);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Interface
-setfillval 0.000000
-box attrs1 wid 0.69357 ht 0.32011 at (3.52120,0.96033);
-{
-define attrs2 % %
-setfillval 0.000000
-"Interface" at (3.52120,0.95736);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Port -> Interface
-setfillval 0.000000
-setfillval 0.000000
-P0: (3.36115,1.60055)
-P1: (3.36941,1.56486)
-P2: (3.37815,1.52742)
-P3: (3.38732,1.48859)
-P4: (3.39686,1.44874)
-P5: (3.40672,1.40826)
-P6: (3.41685,1.36751)
-P7: (3.42719,1.32686)
-P8: (3.43769,1.28670)
-P9: (3.44830,1.24739)
-P10: (3.45896,1.20930)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (3.48564,1.20930)
-P1: (3.47674,1.12038)
-P2: (3.43228,1.20041)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"interfaces" at (3.75239,1.35750);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Queue
-setfillval 0.000000
-box attrs1 wid 0.55130 ht 0.32011 at (2.77428,0.16005);
-{
-define attrs2 % %
-setfillval 0.000000
-"Queue" at (2.77428,0.15709);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# QoS -> Queue
-setfillval 0.000000
-setfillval 0.000000
-P0: (2.77428,0.80027)
-P1: (2.77428,0.76483)
-P2: (2.77428,0.72800)
-P3: (2.77428,0.69000)
-P4: (2.77428,0.65103)
-P5: (2.77428,0.61132)
-P6: (2.77428,0.57108)
-P7: (2.77428,0.53051)
-P8: (2.77428,0.48984)
-P9: (2.77428,0.44927)
-P10: (2.77428,0.40903)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.80985,0.40903)
-P1: (2.77428,0.32011)
-P2: (2.74761,0.40903)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"queues value" at (3.18331,0.55723);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch
-setfillval 0.000000
-box attrs1 wid 1.03146 ht 0.32011 at (4.49042,3.36115);
-{
-define attrs2 % %
-setfillval 0.000000
-"Open_vSwitch" at (4.49042,3.35819);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> Bridge
-setfillval 0.000000
-setfillval 0.000000
-P0: (3.97469,3.20109)
-P1: (3.92643,3.18509)
-P2: (3.87773,3.16908)
-P3: (3.82872,3.15308)
-P4: (3.77950,3.13707)
-P5: (3.73016,3.12107)
-P6: (3.68083,3.10506)
-P7: (3.63161,3.08906)
-P8: (3.58259,3.07305)
-P9: (3.53390,3.05705)
-P10: (3.48564,3.04104)
-P11: (3.38867,3.00613)
-P12: (3.29037,2.97090)
-P13: (3.19154,2.93556)
-P14: (3.09297,2.90033)
-P15: (2.99547,2.86542)
-P16: (2.89984,2.83105)
-P17: (2.80687,2.79742)
-P18: (2.71737,2.76475)
-P19: (2.63214,2.73325)
-P20: (2.55198,2.70315)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (2.56088,2.66758)
-P1: (2.46306,2.66758)
-P2: (2.53420,2.72982)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"bridges" at (3.76129,2.95805);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> Controller
-setfillval 0.000000
-setfillval 0.000000
-P0: (4.36594,3.20109)
-P1: (4.34122,3.16220)
-P2: (4.31543,3.12043)
-P3: (4.28911,3.07609)
-P4: (4.26279,3.02952)
-P5: (4.23700,2.98102)
-P6: (4.21228,2.93092)
-P7: (4.18917,2.87954)
-P8: (4.16818,2.82721)
-P9: (4.14986,2.77423)
-P10: (4.13475,2.72093)
-P11: (4.11548,2.64795)
-P12: (4.10010,2.57354)
-P13: (4.08825,2.49837)
-P14: (4.07955,2.42316)
-P15: (4.07361,2.34858)
-P16: (4.07008,2.27534)
-P17: (4.06858,2.20412)
-P18: (4.06873,2.13563)
-P19: (4.07016,2.07055)
-P20: (4.07250,2.00958)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (4.10807,2.00958)
-P1: (4.07250,1.92066)
-P2: (4.04583,2.00958)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"controller" at (4.42818,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Capability
-setfillval 0.000000
-box attrs1 wid 0.74692 ht 0.32011 at (5.17510,2.56088);
-{
-define attrs2 % %
-setfillval 0.000000
-"Capability" at (5.17510,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> Capability
-setfillval 0.000000
-setfillval 0.000000
-P0: (4.63269,3.20109)
-P1: (4.66305,3.16515)
-P2: (4.69522,3.12697)
-P3: (4.72889,3.08698)
-P4: (4.76373,3.04559)
-P5: (4.79942,3.00325)
-P6: (4.83564,2.96037)
-P7: (4.87208,2.91739)
-P8: (4.90842,2.87473)
-P9: (4.94432,2.83281)
-P10: (4.97948,2.79207)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (5.00616,2.80985)
-P1: (5.03283,2.72093)
-P2: (4.95280,2.77428)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"capabilities value" at (5.41518,2.95805);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# SSL
-setfillval 0.000000
-box attrs1 wid 0.48016 ht 0.32011 at (6.18878,2.56088);
-{
-define attrs2 % %
-setfillval 0.000000
-"SSL" at (6.18878,2.55791);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-{
-define attrs1 % %
-# Open_vSwitch -> SSL
-setfillval 0.000000
-setfillval 0.000000
-P0: (5.00616,3.29891)
-P1: (5.11780,3.28184)
-P2: (5.23244,3.26270)
-P3: (5.34771,3.24153)
-P4: (5.46128,3.21838)
-P5: (5.57079,3.19331)
-P6: (5.67390,3.16638)
-P7: (5.76827,3.13763)
-P8: (5.85153,3.10712)
-P9: (5.92135,3.07491)
-P10: (5.97538,3.04104)
-P11: (5.99617,3.02160)
-P12: (6.01585,3.00078)
-P13: (6.03436,2.97878)
-P14: (6.05163,2.95582)
-P15: (6.06763,2.93211)
-P16: (6.08229,2.90787)
-P17: (6.09557,2.88331)
-P18: (6.10740,2.85865)
-P19: (6.11774,2.83409)
-P20: (6.12654,2.80985)
-move to P0; line attrs1 to P1 then to P2
-move to P2; line attrs1 to P3 then to P4
-move to P4; line attrs1 to P5 then to P6
-move to P6; line attrs1 to P7 then to P8
-move to P8; line attrs1 to P9 then to P10
-move to P10; line attrs1 to P11 then to P12
-move to P12; line attrs1 to P13 then to P14
-move to P14; line attrs1 to P15 then to P16
-move to P16; line attrs1 to P17 then to P18
-move to P18; line attrs1 to P19 then to P20
-{
-define attrs2 % %
-define attrs2 % solid %
-oldlinethick = linethick;linethick = 1 * scalethickness / 10153
-P0: (6.15321,2.81874)
-P1: (6.15321,2.72093)
-P2: (6.09986,2.80096)
-move to P0; line attrs2 to P1
-move to P1; line attrs2 to P2
-move to P2; line attrs2 to P0
-}
-linethick = oldlinethick
-{
-define attrs2 % %
-setfillval 0.000000
-"ssl" at (6.14877,2.95805);
-}
-linethick = oldlinethick
-}
-linethick = oldlinethick
-]
+.\" Generated from vswitch.gv with cksum "2197927206 1028"
+.PS
+linethick = 1;
+linethick = 1;
+box at 3.269320992,2.78572 wid 0.5900294246 height 0.348215 "Bridge"
+linethick = 1;
+box at 0.2708346627,1.9151825 wid 0.5416693254 height 0.348215 "sFlow"
+linethick = 1;
+box at 0.996312758,1.9151825 wid 0.5706825992 height 0.348215 "Mirror"
+linethick = 1;
+box at 2.795400377,1.9151825 wid 0.5223225 height 0.348215 "Port"
+linethick = 1;
+box at 3.646577123,1.9151825 wid 0.831815992 height 0.348215 "Controller"
+linethick = 1;
+box at 4.681541746,1.9151825 wid 0.889898254 height 0.348215 "Flow_Table"
+linethick = 1;
+box at 6.103442877,1.9151825 wid 0.715790754 height 0.348215 "NetFlow"
+linethick = 0.5;
+box at 2.244036746,1.044645 wid 0.5223225 height 0.348215 "QoS"
+box at 2.244036746,1.044645 wid 0.466766944444444 height 0.292659444444444
+linethick = 0.5;
+box at 2.244036746,0.1741075 wid 0.5997028373 height 0.348215 "Queue"
+box at 2.244036746,0.1741075 wid 0.544147281744444 height 0.292659444444444
+linethick = 0.5;
+box at 4.052804742,3.6562575 wid 1.122018373 height 0.348215 "Open_vSwitch"
+box at 4.052804742,3.6562575 wid 1.06646281744444 height 0.292659444444444
+linethick = 1;
+box at 4.052804742,2.78572 wid 0.5223225 height 0.348215 "SSL"
+linethick = 1;
+box at 4.855649246,2.78572 wid 0.744762242 height 0.348215 "Manager"
+linethick = 1;
+box at 3.056561627,1.044645 wid 0.754442619 height 0.348215 "Interface"
+linethick = 1;
+spline -> from 2.976332891,2.75298779 to 2.976332891,2.75298779 to 2.604160699,2.706535909 to 1.945268276,2.607573206 to 1.402540377,2.437505 to 1.042625353,2.324752983 to 0.970266276,2.249190328 to 0.6287230754,2.08929 to 0.6011862332,2.076406045 to 0.5725420673,2.06282566 to 0.5439884373,2.049105989
+"sflow?" at 1.620174752,2.35045125
+linethick = 1;
+spline -> from 2.97514896,2.6812555 to 2.97514896,2.6812555 to 2.785302142,2.613214289 to 2.533333768,2.52177303 to 2.311729742,2.437505 to 1.95348615,2.301283292 to 1.543358523,2.137134741 to 1.277600835,2.029675592
+"mirrors*" at 2.592251746,2.35045125
+linethick = 1;
+spline -> from 3.102665293,2.610428569 to 3.102665293,2.610428569 to 3.058372345,2.557708818 to 3.013382967,2.497746195 to 2.979188254,2.437505 to 2.917484556,2.32886192 to 2.871032675,2.19584379 to 2.840250469,2.091240004
+"ports*" at 3.187142252,2.35045125
+linethick = 1;
+spline -> from 3.345719363,2.60952321 to 3.345719363,2.60952321 to 3.41111414,2.458537186 to 3.504923261,2.242017099 to 3.570387681,2.091100718
+"controller*" at 3.849725754,2.35045125
+linethick = 1;
+spline -> from 3.563284095,2.664959038 to 3.563284095,2.664959038 to 3.610362763,2.646503643 to 3.658695005,2.628187534 to 3.704589742,2.6116125 to 3.942559873,2.525881967 to 4.036647566,2.578949933 to 4.246272996,2.437505 to 4.380335771,2.347038743 to 4.495594936,2.203852735 to 4.573734382,2.090195359
+"flow_tables value*" at 5.063603244,2.35045125
+linethick = 1;
+spline -> from 3.560568018,2.655696519 to 3.560568018,2.655696519 to 3.607925258,2.638425055 to 3.657093216,2.622894666 to 3.704589742,2.6116125 to 4.143340642,2.507426572 to 5.333887727,2.659805456 to 5.726186746,2.437505 to 5.863383456,2.359713769 to 5.963947948,2.209215246 to 6.026557005,2.089638215
+"netflow?" at 6.204982371,2.35045125
+linethick = 0.5;
+spline -> from 1.285331208,1.9151825 to 1.285331208,1.9151825 to 1.629994415,1.9151825 to 2.201067015,1.9151825 to 2.533403411,1.9151825
+"select_src_port*" at 1.905502123,2.00223625
+linethick = 0.5;
+spline -> from 1.262209732,1.740239284 to 1.262209732,1.740239284 to 1.2953598,1.724778538 to 1.329693799,1.711546368 to 1.363818869,1.702353492 to 1.82882518,1.577483593 to 1.983711212,1.571981796 to 2.447185377,1.702353492 to 2.479917587,1.711616011 to 2.512649797,1.724848181 to 2.544128433,1.740239284
+"output_port?" at 1.905502123,1.789407242
+linethick = 0.5;
+spline -> from 1.066861117,1.739821426 to 1.066861117,1.739821426 to 1.126266596,1.618155105 to 1.224115011,1.465428006 to 1.363818869,1.39286 to 1.791148317,1.171047045 to 2.022641649,1.165684534 to 2.447185377,1.39286 to 2.583616014,1.465915507 to 2.675823346,1.618572963 to 2.730910959,1.740169641
+"select_dst_port*" at 1.905502123,1.47991375
+linethick = 1;
+spline -> from 2.682021573,1.738149994 to 2.682021573,1.738149994 to 2.646921501,1.683340953 to 2.608269636,1.6226819 to 2.572890992,1.5669675 to 2.49948727,1.451151191 to 2.417238887,1.320570566 to 2.353376256,1.218961429
+"qos?" at 2.722832371,1.47991375
+linethick = 1;
+spline -> from 2.848259414,1.73898571 to 2.848259414,1.73898571 to 2.893527364,1.587999686 to 2.958504283,1.371479599 to 3.003772233,1.220563218
+"interfaces+" at 3.337083631,1.47991375
+linethick = 1;
+spline -> from 2.244036746,0.86844821 to 2.244036746,0.86844821 to 2.244036746,0.717462186 to 2.244036746,0.5009699562 to 2.244036746,0.3500117894
+"queues value*" at 2.727707381,0.60937625
+linethick = 1;
+spline -> from 3.657511074,3.480617854 to 3.657511074,3.480617854 to 3.582018062,3.433121328 to 3.509171484,3.375735496 to 3.453108869,3.3080425 to 3.370999772,3.208801225 to 3.324478248,3.070350941 to 3.298849624,2.960941788
+"bridges*" at 3.733630873,3.22098875
+linethick = 1;
+spline -> from 4.052804742,3.48006071 to 4.052804742,3.48006071 to 4.052804742,3.329074686 to 4.052804742,3.112554599 to 4.052804742,2.961638218
+"ssl?" at 4.173774633,3.22098875
+linethick = 1;
+spline -> from 4.215281861,3.48006071 to 4.215281861,3.48006071 to 4.354567861,3.329074686 to 4.554234342,3.112554599 to 4.693450699,2.961638218
+"manager_options*" at 5.140976617,3.22098875
.PE
-.\" restore point size and font
-.ps \n(.S
-.ft \n(DF
git://git.onelab.eu / sliver-openvswitch.git / blobdiff