</p>
<column name="options" key="remote_ip">
- Required. The tunnel endpoint. Only unicast endpoints are supported.
+ <p>Required. The remote tunnel endpoint, one of:</p>
+
+ <ul>
+ <li>
+ An IPv4 address (not a DNS name), e.g. <code>192.168.0.123</code>.
+ Only unicast endpoints are supported.
+ </li>
+ <li>
+ The word <code>flow</code>. The tunnel accepts packets from any
+ remote tunnel endpoint. To process only packets from a specific
+ remote tunnel endpoint, the flow entries may match on the
+ <code>tun_src</code> field. When sending packets to a
+ <code>remote_ip=flow</code> tunnel, the flow actions must
+ explicitly set the <code>tun_dst</code> field to the IP address of
+ the desired remote tunnel endpoint, e.g. with a
+ <code>set_field</code> action.
+ </li>
+ </ul>
+
+ <p>
+ The remote tunnel endpoint for any packet received from a tunnel
+ is available in the <code>tun_src</code> field for matching in the
+ flow table.
+ </p>
</column>
<column name="options" key="local_ip">
- Optional. The destination IP that received packets must match.
- Default is to match all addresses.
+ <p>
+ Optional. The tunnel destination IP that received packets must
+ match. Default is to match all addresses. If specified, may be one
+ of:
+ </p>
+
+ <ul>
+ <li>
+ An IPv4 address (not a DNS name), e.g. <code>192.168.12.3</code>.
+ </li>
+ <li>
+ The word <code>flow</code>. The tunnel accepts packets sent to any
+ of the local IP addresses of the system running OVS. To process
+ only packets sent to a specific IP address, the flow entries may
+ match on the <code>tun_dst</code> field. When sending packets to a
+ <code>local_ip=flow</code> tunnel, the flow actions may
+ explicitly set the <code>tun_src</code> field to the desired IP
+ address, e.g. with a <code>set_field</code> action. However, while
+ routing the tunneled packet out, the local system may override the
+ specified address with the local IP address configured for the
+ outgoing system interface.
+
+ <p>
+ This option is valid only for tunnels also configured with the
+ <code>remote_ip=flow</code> option.
+ </p>
+ </li>
+ </ul>
+
+ <p>
+ The tunnel destination IP address for any packet received from a
+ tunnel is available in the <code>tun_dst</code> field for matching in
+ the flow table.
+ </p>
</column>
<column name="options" key="in_key">