+<?xml version="1.0" encoding="utf-8"?>
<database title="Open vSwitch Configuration Database">
- <p>A database with this schema holds the configuration for one Open
- vSwitch daemon. The root of the configuration for the daemon is
- the <ref table="Open_vSwitch"/> table, which must have exactly one
+ <p>
+ A database with this schema holds the configuration for one Open
+ vSwitch daemon. The top-level configuration for the daemon is the
+ <ref table="Open_vSwitch"/> table, which must have exactly one
record. Records in other tables are significant only when they
- can be reached directly or indirectly from the
- <ref table="Open_vSwitch"/> table.</p>
+ can be reached directly or indirectly from the <ref
+ table="Open_vSwitch"/> table. Records that are not reachable from
+ the <ref table="Open_vSwitch"/> table are automatically deleted
+ from the database, except for records in a few distinguished
+ ``root set'' tables noted below.
+ </p>
<table name="Open_vSwitch" title="Open vSwitch configuration.">
- Configuration for an Open vSwitch daemon. There must be exactly one record
- in the <ref table="Open_vSwitch"/> table.
+ Configuration for an Open vSwitch daemon. There must be exactly
+ one record in the <ref table="Open_vSwitch"/> table.
<group title="Configuration">
<column name="bridges">
Set of bridges managed by the daemon.
</column>
- <column name="managers">
- Remote database clients to which the Open vSwitch's database server
- should connect or to which it should listen.
- </column>
-
<column name="ssl">
SSL used globally by the daemon.
</column>
<column name="external_ids">
- Key-value pairs that identify this Open vSwitch's role in
- external systems. The currently defined key-value pairs are:
+ Key-value pairs for use by external frameworks that integrate
+ with Open vSwitch, rather than by Open vSwitch itself. System
+ integrators should either use the Open vSwitch development
+ mailing list to coordinate on common key-value definitions, or
+ choose key names that are likely to be unique. The currently
+ defined common key-value pairs are:
<dl>
- <dt><code>system-uuid</code></dt>
- <dd>A universally unique identifier for the Open vSwitch's
- physical host. The form of the identifier depends on the
- type of the host. On a Citrix XenServer, this is the host
- UUID displayed by, e.g., <code>xe host-list</code>.</dd>
+ <dt><code>system-id</code></dt>
+ <dd>A unique identifier for the Open vSwitch's physical host.
+ The form of the identifier depends on the type of the host.
+ On a Citrix XenServer, this will likely be the same as
+ <code>xs-system-uuid</code>.</dd>
+ <dt><code>xs-system-uuid</code></dt>
+ <dd>The Citrix XenServer universally unique identifier for the
+ physical host as displayed by <code>xe host-list</code>.</dd>
</dl>
</column>
</group>
<column name="statistics">
<p>
- Key-value pairs that report statistics about a running Open_vSwitch
- daemon. The current implementation updates these counters
- periodically. In the future, we plan to, instead, update them only
- when they are queried (e.g. using an OVSDB <code>select</code>
- operation) and perhaps at other times, but not on any regular
- periodic basis.</p>
- <p>
- The currently defined key-value pairs are listed below. Some Open
- vSwitch implementations may not support some statistics, in which
- case those key-value pairs are omitted.</p>
+ Key-value pairs that report statistics about a system running an Open
+ vSwitch. These are updated periodically (currently, every 5
+ seconds). Key-value pairs that cannot be determined or that do not
+ apply to a platform are omitted.
+ </p>
+
<dl>
- <dt><code>load-average</code></dt>
+ <dt><code>cpu</code></dt>
+ <dd>
+ <p>
+ Number of CPU processors, threads, or cores currently online and
+ available to the operating system on which Open vSwitch is
+ running, as an integer. This may be less than the number
+ installed, if some are not online or if they are not available to
+ the operating system.
+ </p>
+ <p>
+ Open vSwitch userspace processes are not multithreaded, but the
+ Linux kernel-based datapath is.
+ </p>
+ </dd>
+
+ <dt><code>load_average</code></dt>
+ <dd>
+ <p>
+ A comma-separated list of three floating-point numbers,
+ representing the system load average over the last 1, 5, and 15
+ minutes, respectively.
+ </p>
+ </dd>
+
+ <dt><code>memory</code></dt>
+ <dd>
+ <p>
+ A comma-separated list of integers, each of which represents a
+ quantity of memory in kilobytes that describes the operating
+ system on which Open vSwitch is running. In respective order,
+ these values are:
+ </p>
+
+ <ol>
+ <li>Total amount of RAM allocated to the OS.</li>
+ <li>RAM allocated to the OS that is in use.</li>
+ <li>RAM that can be flushed out to disk or otherwise discarded
+ if that space is needed for another purpose. This number is
+ necessarily less than or equal to the previous value.</li>
+ <li>Total disk space allocated for swap.</li>
+ <li>Swap space currently in use.</li>
+ </ol>
+
+ <p>
+ On Linux, all five values can be determined and are included. On
+ other operating systems, only the first two values can be
+ determined, so the list will only have two values.
+ </p>
+ </dd>
+
+ <dt><code>process_</code><var>name</var></dt>
+ <dd>
+ <p>
+ One such key-value pair will exist for each running Open vSwitch
+ daemon process, with <var>name</var> replaced by the daemon's
+ name (e.g. <code>process_ovs-vswitchd</code>). The value is a
+ comma-separated list of integers. The integers represent the
+ following, with memory measured in kilobytes and durations in
+ milliseconds:
+ </p>
+
+ <ol>
+ <li>The process's virtual memory size.</li>
+ <li>The process's resident set size.</li>
+ <li>The amount of user and system CPU time consumed by the
+ process.</li>
+ <li>The number of times that the process has crashed and been
+ automatically restarted by the monitor.</li>
+ <li>The duration since the process was started.</li>
+ <li>The duration for which the process has been running.</li>
+ </ol>
+
+ <p>
+ The interpretation of some of these values depends on whether the
+ process was started with the <option>--monitor</option>. If it
+ was not, then the crash count will always be 0 and the two
+ durations will always be the same. If <option>--monitor</option>
+ was given, then the crash count may be positive; if it is, the
+ latter duration is the amount of time since the most recent crash
+ and restart.
+ </p>
+
+ <p>
+ There will be one key-value pair for each file in Open vSwitch's
+ ``run directory'' (usually <code>/var/run/openvswitch</code>)
+ whose name ends in <code>.pid</code>, whose contents are a
+ process ID, and which is locked by a running process. The
+ <var>name</var> is taken from the pidfile's name.
+ </p>
+
+ <p>
+ Currently Open vSwitch is only able to obtain all of the above
+ detail on Linux systems. On other systems, the same key-value
+ pairs will be present but the values will always be the empty
+ string.
+ </p>
+ </dd>
+
+ <dt><code>file_systems</code></dt>
<dd>
- System load average multiplied by 100 and rounded to the nearest
- integer.</dd>
+ <p>
+ A space-separated list of information on local, writable file
+ systems. Each item in the list describes one file system and
+ consists in turn of a comma-separated list of the following:
+ </p>
+
+ <ol>
+ <li>Mount point, e.g. <code>/</code> or <code>/var/log</code>.
+ Any spaces or commas in the mount point are replaced by
+ underscores.</li>
+ <li>Total size, in kilobytes, as an integer.</li>
+ <li>Amount of storage in use, in kilobytes, as an integer.</li>
+ </ol>
+
+ <p>
+ This key-value pair is omitted if there are no local, writable
+ file systems or if Open vSwitch cannot obtain the needed
+ information.
+ </p>
+ </dd>
</dl>
</column>
</group>
+
+ <group title="Version Reporting">
+ <p>
+ These columns report the types and versions of the hardware and
+ software running Open vSwitch. We recommend in general that software
+ should test whether specific features are supported instead of relying
+ on version number checks. These values are primarily intended for
+ reporting to human administrators.
+ </p>
+
+ <column name="ovs_version">
+ The Open vSwitch version number, e.g. <code>1.1.0</code>.
+ If Open vSwitch was configured with a build number, then it is
+ also included, e.g. <code>1.1.0+build6579</code>.
+ </column>
+
+ <column name="db_version">
+ <p>
+ The database schema version number in the form
+ <code><var>major</var>.<var>minor</var>.<var>tweak</var></code>,
+ e.g. <code>1.2.3</code>. Whenever the database schema is changed in
+ a non-backward compatible way (e.g. deleting a column or a table),
+ <var>major</var> is incremented. When the database schema is changed
+ in a backward compatible way (e.g. adding a new column),
+ <var>minor</var> is incremented. When the database schema is changed
+ cosmetically (e.g. reindenting its syntax), <var>tweak</var> is
+ incremented.
+ </p>
+
+ <p>
+ The schema version is part of the database schema, so it can also be
+ retrieved by fetching the schema using the Open vSwitch database
+ protocol.
+ </p>
+ </column>
+
+ <column name="system_type">
+ <p>
+ An identifier for the type of system on top of which Open vSwitch
+ runs, e.g. <code>XenServer</code> or <code>KVM</code>.
+ </p>
+ <p>
+ System integrators are responsible for choosing and setting an
+ appropriate value for this column.
+ </p>
+ </column>
+
+ <column name="system_version">
+ <p>
+ The version of the system identified by <ref column="system_type"/>,
+ e.g. <code>5.6.100-39265p</code> on XenServer 5.6.100 build 39265.
+ </p>
+ <p>
+ System integrators are responsible for choosing and setting an
+ appropriate value for this column.
+ </p>
+ </column>
+
+ </group>
+
+ <group title="Database Configuration">
+ <p>
+ These columns primarily configure the Open vSwitch database
+ (<code>ovsdb-server</code>), not the Open vSwitch switch
+ (<code>ovs-vswitchd</code>). The OVSDB database also uses the <ref
+ column="ssl"/> settings.
+ </p>
+
+ <p>
+ The Open vSwitch switch does read the database configuration to
+ determine remote IP addresses to which in-band control should apply.
+ </p>
+
+ <column name="manager_options">
+ Database clients to which the Open vSwitch database server should
+ connect or to which it should listen, along with options for how these
+ connection should be configured. See the <ref table="Manager"/> table
+ for more information.
+ </column>
+ </group>
</table>
<table name="Bridge">
</dl>
</p>
<p>If this value is unset, the default is implementation-specific.</p>
- <p>When more than one controller is configured,
+ <p>When more than one controller is configured,
<ref column="fail_mode"/> is considered only when none of the
configured controllers can be contacted.</p>
</column>
</column>
<column name="external_ids">
- Key-value pairs that identify this bridge's role in external systems.
- The currently defined key-value pairs are:
+ Key-value pairs for use by external frameworks that integrate
+ with Open vSwitch, rather than by Open vSwitch itself. System
+ integrators should either use the Open vSwitch development
+ mailing list to coordinate on common key-value definitions, or
+ choose key names that are likely to be unique. The currently
+ defined key-value pairs are:
<dl>
- <dt><code>network-uuids</code></dt>
+ <dt><code>bridge-id</code></dt>
+ <dd>A unique identifier of the bridge. On Citrix XenServer this
+ will commonly be the same as <code>xs-network-uuids</code>.</dd>
+ <dt><code>xs-network-uuids</code></dt>
<dd>Semicolon-delimited set of universally unique identifier(s) for
- the network with which this bridge is associated. The form of the
- identifier(s) depends on the type of the host. On a Citrix
- XenServer host, the network identifiers are RFC 4122 UUIDs as
+ the network with which this bridge is associated on a Citrix
+ XenServer host. The network identifiers are RFC 4122 UUIDs as
displayed by, e.g., <code>xe network-list</code>.</dd>
</dl>
</column>
<dt><code>datapath-id</code></dt>
<dd>Exactly 16 hex
digits to set the OpenFlow datapath ID to a specific
- value.</dd>
+ value. May not be all-zero.</dd>
+ <dt><code>disable-in-band</code></dt>
+ <dd>If set to <code>true</code>, disable in-band control on
+ the bridge regardless of controller and manager settings.</dd>
<dt><code>hwaddr</code></dt>
<dd>An Ethernet address in the form
<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>
to set the hardware address of the local port and influence the
datapath ID.</dd>
+ <dt><code>in-band-queue</code></dt>
+ <dd>
+ A queue ID as a nonnegative integer. This sets the OpenFlow queue
+ ID that will be used by flows set up by in-band control on this
+ bridge. If unset, or if the port used by an in-band control flow
+ does not have QoS configured, or if the port does not have a queue
+ with the specified ID, the default queue is used instead.
+ </dd>
</dl>
</column>
</group>
</group>
<group title="Bonding Configuration">
- <p>A port that has more than one interface is a ``bonded port.''
- Bonding allows for load balancing and fail-over. Open vSwitch
- supports ``source load balancing'' (SLB) bonding, which
- assigns flows to slaves based on source MAC address, with
- periodic rebalancing as traffic patterns change. This form of
- bonding does not require 802.3ad or other special support from
- the upstream switch to which the slave devices are
- connected.</p>
+ <p>A port that has more than one interface is a ``bonded port.'' Bonding
+ allows for load balancing and fail-over. Some kinds of bonding will
+ work with any kind of upstream switch:</p>
+
+ <dl>
+ <dt><code>balance-slb</code></dt>
+ <dd>
+ Balances flows among slaves based on source MAC address and output
+ VLAN, with periodic rebalancing as traffic patterns change.
+ </dd>
+
+ <dt><code>active-backup</code></dt>
+ <dd>
+ Assigns all flows to one slave, failing over to a backup slave when
+ the active slave is disabled.
+ </dd>
+ </dl>
+
+ <p>
+ The following mode requires the upstream switch to support 802.3ad with
+ successful LACP negotiation. If LACP negotiation fails then
+ <code>balance-slb</code> mode is used as a fallback:
+ </p>
+
+ <dl>
+ <dt><code>balance-tcp</code></dt>
+ <dd>
+ Balances flows among slaves based on L2, L3, and L4 protocol
+ information such as destination MAC address, IP address, and TCP
+ port.
+ </dd>
+ </dl>
<p>These columns apply only to bonded ports. Their values are
otherwise ignored.</p>
+ <column name="bond_mode">
+ <p>The type of bonding used for a bonded port. Defaults to
+ <code>balance-slb</code> if unset.
+ </p>
+ </column>
+
<column name="bond_updelay">
<p>For a bonded port, the number of milliseconds for which carrier must
stay up on an interface before the interface is considered to be up.
name of the port. Use only for compatibility with legacy software that
requires this.
</column>
+
+ <column name="lacp">
+ <p>Configures LACP on this port. LACP allows directly connected
+ switches to negotiate which links may be bonded. LACP may be enabled
+ on non-bonded ports for the benefit of any switches they may be
+ connected to. <code>active</code> ports are allowed to initiate LACP
+ negotiations. <code>passive</code> ports are allowed to participate
+ in LACP negotiations initiated by a remote switch, but not allowed to
+ initiate such negotiations themselves. If unset Open vSwitch will
+ choose a reasonable default. </p>
+ </column>
+
</group>
<group title="Other Features">
<column name="qos">
Quality of Service configuration for this port.
</column>
-
+
<column name="mac">
The MAC address to use for this port for the purpose of choosing the
bridge's MAC address. This column does not necessarily reflect the
</column>
<column name="external_ids">
- Key-value pairs that identify this port's role in external systems. No
- key-value pairs native to <ref table="Port"/> are currently defined.
- For fake bridges (see the <ref column="fake_bridge"/> column), external
- IDs for the fake bridge are defined here by prefixing a
- <ref table="Bridge"/> <ref table="Bridge" column="external_ids"/> key
- with <code>fake-bridge-</code>,
- e.g. <code>fake-bridge-network-uuids</code>.
+ <p>
+ Key-value pairs for use by external frameworks that integrate with
+ Open vSwitch, rather than by Open vSwitch itself. System integrators
+ should either use the Open vSwitch development mailing list to
+ coordinate on common key-value definitions, or choose key names that
+ are likely to be unique.
+ </p>
+ <p>
+ No key-value pairs native to <ref table="Port"/> are currently
+ defined. For fake bridges (see the <ref column="fake_bridge"/>
+ column), external IDs for the fake bridge are defined here by
+ prefixing a <ref table="Bridge"/> <ref table="Bridge"
+ column="external_ids"/> key with <code>fake-bridge-</code>,
+ e.g. <code>fake-bridge-xs-network-uuids</code>.
+ </p>
</column>
<column name="other_config">
<dd>An Ethernet address in the form
<code><var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var></code>.</dd>
<dt><code>bond-rebalance-interval</code></dt>
- <dd>For a bonded port, the number of milliseconds between
+ <dd>For an SLB bonded port, the number of milliseconds between
successive attempts to rebalance the bond, that is, to
move source MACs and their flows from one interface on
the bond to another in an attempt to keep usage of each
interface roughly equal. The default is 10000 (10
seconds), and the minimum is 1000 (1 second).</dd>
+ <dt><code>bond-detect-mode</code></dt>
+ <dd> Sets the method used to detect link failures in a bonded port.
+ Options are <code>carrier</code> and <code>miimon</code>. Defaults
+ to <code>carrier</code> which uses each interface's carrier to detect
+ failures. When set to <code>miimon</code>, will check for failures
+ by polling each interface's MII. </dd>
+ <dt><code>bond-miimon-interval</code></dt>
+ <dd> The number of milliseconds between successive attempts to
+ poll each interface's MII. Only relevant on ports which use
+ <code>miimon</code> to detect failures. </dd>
+ <dt><code>lacp-system-priority</code></dt>
+ <dd> The LACP system priority of this <ref table="Port"/>. In
+ LACP negotiations, link status decisions are made by the system
+ with the numerically lower priority. Must be a number between 1
+ and 65535.</dd>
+ <dt><code>lacp-time</code></dt>
+ <dd> The LACP timing which should be used on this
+ <ref table="Port"/>. Possible values are <code>fast</code> and
+ <code>slow</code>. By default <code>slow</code> is used. When
+ configured to be <code>fast</code> more frequent LACP heartbeats
+ will be requested causing connectivity problems to be detected more
+ quickly.</dd>
</dl>
</column>
</group>
<p>Open vSwitch populates this column when the port number becomes
known. If the interface is successfully added,
<ref column="ofport"/> will be set to a number between 1 and 65535
- (generally either in the range 1 to 65280, exclusive, or 65534, the
+ (generally either in the range 1 to 65279, inclusive, or 65534, the
port number for the OpenFlow ``local port''). If the interface
cannot be added then Open vSwitch sets this column
to -1.</p>
<dt><code>tap</code></dt>
<dd>A TUN/TAP device managed by Open vSwitch.</dd>
<dt><code>gre</code></dt>
- <dd>An Ethernet over RFC 1702 Generic Routing Encapsulation over IPv4
+ <dd>An Ethernet over RFC 2890 Generic Routing Encapsulation over IPv4
tunnel. Each tunnel must be uniquely identified by the
combination of <code>remote_ip</code>, <code>local_ip</code>, and
<code>in_key</code>. Note that if two ports are defined that are
the same except one has an optional identifier and the other does
not, the more specific one is matched first. <code>in_key</code>
is considered more specific than <code>local_ip</code> if a port
- defines one and another port defines the other. The arguments
- are:
+ defines one and another port defines the other. The following
+ options may be specified in the <ref column="options"/> column:
<dl>
<dt><code>remote_ip</code></dt>
<dd>Required. The tunnel endpoint.</dd>
either be a 32-bit number or the word <code>flow</code>. If
<code>flow</code> is specified then the key may be set using
the <code>set_tunnel</code> Nicira OpenFlow vendor extension (0
- is used in the absense of an action). The ovs-ofctl manual
+ is used in the absence of an action). The ovs-ofctl manual
page contains additional information about the Nicira OpenFlow
vendor extensions. Default is no key.</dd>
</dl>
</dl>
<dl>
<dt><code>csum</code></dt>
- <dd>Optional. Compute GRE checksums for outgoing packets and
- require checksums for incoming packets. Default is enabled,
- set to <code>false</code> to disable.</dd>
+ <dd>Optional. Compute GRE checksums on outgoing packets.
+ Checksums present on incoming packets will be validated
+ regardless of this setting. Note that GRE checksums
+ impose a significant performance penalty as they cover the
+ entire packet. As the contents of the packet is typically
+ covered by L3 and L4 checksums, this additional checksum only
+ adds value for the GRE and encapsulated Ethernet headers.
+ Default is disabled, set to <code>true</code> to enable.</dd>
</dl>
<dl>
<dt><code>pmtud</code></dt>
compliance with the IEEE 802.1D specification for bridges.
Default is enabled, set to <code>false</code> to disable.</dd>
</dl>
+ <dl>
+ <dt><code>header_cache</code></dt>
+ <dd>Optional. Enable caching of tunnel headers and the output
+ path. This can lead to a significant performance increase
+ without changing behavior. In general it should not be
+ necessary to adjust this setting. However, the caching can
+ bypass certain components of the IP stack (such as IP tables)
+ and it may be useful to disable it if these features are
+ required or as a debugging measure. Default is enabled, set to
+ <code>false</code> to disable.</dd>
+ </dl>
+ </dd>
+ <dt><code>ipsec_gre</code></dt>
+ <dd>An Ethernet over RFC 2890 Generic Routing Encapsulation
+ over IPv4 IPsec tunnel. Each tunnel (including those of type
+ <code>gre</code>) must be uniquely identified by the
+ combination of <code>remote_ip</code> and
+ <code>local_ip</code>. Note that if two ports are defined
+ that are the same except one has an optional identifier and
+ the other does not, the more specific one is matched first.
+ An authentication method of <code>peer_cert</code> or
+ <code>psk</code> must be defined. The following options may
+ be specified in the <ref column="options"/> column:
+ <dl>
+ <dt><code>remote_ip</code></dt>
+ <dd>Required. The tunnel endpoint.</dd>
+ </dl>
+ <dl>
+ <dt><code>local_ip</code></dt>
+ <dd>Optional. The destination IP that received packets must
+ match. Default is to match all addresses.</dd>
+ </dl>
+ <dl>
+ <dt><code>peer_cert</code></dt>
+ <dd>Required for certificate authentication. A string
+ containing the peer's certificate in PEM format.
+ Additionally the host's certificate must be specified
+ with the <code>certificate</code> option.</dd>
+ </dl>
+ <dl>
+ <dt><code>certificate</code></dt>
+ <dd>Required for certificate authentication. The name of a
+ PEM file containing a certificate that will be presented
+ to the peer during authentication.</dd>
+ </dl>
+ <dl>
+ <dt><code>private_key</code></dt>
+ <dd>Optional for certificate authentication. The name of
+ a PEM file containing the private key associated with
+ <code>certificate</code>. If <code>certificate</code>
+ contains the private key, this option may be omitted.</dd>
+ </dl>
+ <dl>
+ <dt><code>psk</code></dt>
+ <dd>Required for pre-shared key authentication. Specifies a
+ pre-shared key for authentication that must be identical on
+ both sides of the tunnel.</dd>
+ </dl>
+ <dl>
+ <dt><code>in_key</code></dt>
+ <dd>Optional. The GRE key that received packets must contain.
+ It may either be a 32-bit number (no key and a key of 0 are
+ treated as equivalent) or the word <code>flow</code>. If
+ <code>flow</code> is specified then any key will be accepted
+ and the key will be placed in the <code>tun_id</code> field
+ for matching in the flow table. The ovs-ofctl manual page
+ contains additional information about matching fields in
+ OpenFlow flows. Default is no key.</dd>
+ </dl>
+ <dl>
+ <dt><code>out_key</code></dt>
+ <dd>Optional. The GRE key to be set on outgoing packets. It may
+ either be a 32-bit number or the word <code>flow</code>. If
+ <code>flow</code> is specified then the key may be set using
+ the <code>set_tunnel</code> Nicira OpenFlow vendor extension (0
+ is used in the absence of an action). The ovs-ofctl manual
+ page contains additional information about the Nicira OpenFlow
+ vendor extensions. Default is no key.</dd>
+ </dl>
+ <dl>
+ <dt><code>key</code></dt>
+ <dd>Optional. Shorthand to set <code>in_key</code> and
+ <code>out_key</code> at the same time.</dd>
+ </dl>
+ <dl>
+ <dt><code>tos</code></dt>
+ <dd>Optional. The value of the ToS bits to be set on the
+ encapsulating packet. It may also be the word
+ <code>inherit</code>, in which case the ToS will be copied from
+ the inner packet if it is IPv4 or IPv6 (otherwise it will be
+ 0). Note that the ECN fields are always inherited. Default is
+ 0.</dd>
+ </dl>
+ <dl>
+ <dt><code>ttl</code></dt>
+ <dd>Optional. The TTL to be set on the encapsulating packet.
+ It may also be the word <code>inherit</code>, in which case the
+ TTL will be copied from the inner packet if it is IPv4 or IPv6
+ (otherwise it will be the system default, typically 64).
+ Default is the system default TTL.</dd>
+ </dl>
+ <dl>
+ <dt><code>csum</code></dt>
+ <dd>Optional. Compute GRE checksums on outgoing packets.
+ Checksums present on incoming packets will be validated
+ regardless of this setting. Note that GRE checksums
+ impose a significant performance penalty as they cover the
+ entire packet. As the contents of the packet is typically
+ covered by L3 and L4 checksums, this additional checksum only
+ adds value for the GRE and encapsulated Ethernet headers.
+ Default is disabled, set to <code>true</code> to enable.</dd>
+ </dl>
+ <dl>
+ <dt><code>pmtud</code></dt>
+ <dd>Optional. Enable tunnel path MTU discovery. If enabled
+ ``ICMP destination unreachable - fragmentation'' needed
+ messages will be generated for IPv4 packets with the DF bit set
+ and IPv6 packets above the minimum MTU if the packet size
+ exceeds the path MTU minus the size of the tunnel headers. It
+ also forces the encapsulating packet DF bit to be set (it is
+ always set if the inner packet implies path MTU discovery).
+ Note that this option causes behavior that is typically
+ reserved for routers and therefore is not entirely in
+ compliance with the IEEE 802.1D specification for bridges.
+ Default is enabled, set to <code>false</code> to disable.</dd>
+ </dl>
+ </dd>
+ <dt><code>capwap</code></dt>
+ <dd>Ethernet tunneling over the UDP transport portion of CAPWAP
+ (RFC 5415). This allows interoperability with certain switches
+ where GRE is not available. Note that only the tunneling component
+ of the protocol is implemented. Due to the non-standard use of
+ CAPWAP, UDP ports 58881 and 58882 are used as the source and
+ destination ports respectively. Each tunnel must be uniquely
+ identified by the combination of <code>remote_ip</code> and
+ <code>local_ip</code>. If two ports are defined that are the same
+ except one includes <code>local_ip</code> and the other does not,
+ the more specific one is matched first. CAPWAP support is not
+ available on all platforms. Currently it is only supported in the
+ Linux kernel module with kernel versions >= 2.6.25. The following
+ options may be specified in the <ref column="options"/> column:
+ <dl>
+ <dt><code>remote_ip</code></dt>
+ <dd>Required. The tunnel endpoint.</dd>
+ </dl>
+ <dl>
+ <dt><code>local_ip</code></dt>
+ <dd>Optional. The destination IP that received packets must
+ match. Default is to match all addresses.</dd>
+ </dl>
+ <dl>
+ <dt><code>tos</code></dt>
+ <dd>Optional. The value of the ToS bits to be set on the
+ encapsulating packet. It may also be the word
+ <code>inherit</code>, in which case the ToS will be copied from
+ the inner packet if it is IPv4 or IPv6 (otherwise it will be
+ 0). Note that the ECN fields are always inherited. Default is
+ 0.</dd>
+ </dl>
+ <dl>
+ <dt><code>ttl</code></dt>
+ <dd>Optional. The TTL to be set on the encapsulating packet.
+ It may also be the word <code>inherit</code>, in which case the
+ TTL will be copied from the inner packet if it is IPv4 or IPv6
+ (otherwise it will be the system default, typically 64).
+ Default is the system default TTL.</dd>
+ </dl>
+ <dl>
+ <dt><code>pmtud</code></dt>
+ <dd>Optional. Enable tunnel path MTU discovery. If enabled
+ ``ICMP destination unreachable - fragmentation'' needed
+ messages will be generated for IPv4 packets with the DF bit set
+ and IPv6 packets above the minimum MTU if the packet size
+ exceeds the path MTU minus the size of the tunnel headers. It
+ also forces the encapsulating packet DF bit to be set (it is
+ always set if the inner packet implies path MTU discovery).
+ Note that this option causes behavior that is typically
+ reserved for routers and therefore is not entirely in
+ compliance with the IEEE 802.1D specification for bridges.
+ Default is enabled, set to <code>false</code> to disable.</dd>
+ </dl>
+ <dl>
+ <dt><code>header_cache</code></dt>
+ <dd>Optional. Enable caching of tunnel headers and the output
+ path. This can lead to a significant performance increase
+ without changing behavior. In general it should not be
+ necessary to adjust this setting. However, the caching can
+ bypass certain components of the IP stack (such as IP tables)
+ and it may be useful to disable it if these features are
+ required or as a debugging measure. Default is enabled, set to
+ <code>false</code> to disable.</dd>
+ </dl>
</dd>
<dt><code>patch</code></dt>
- <dd>A pair of virtual devices that act as a patch cable. A
- <code>peer</code> argument is required that indicates the name
- of the other side of the patch. Since a patch must work in
- pairs, a second patch interface must be declared with the
- <code>name</code> and <code>peer</code> arguments reversed.</dd>
+ <dd>
+ <p>
+ A pair of virtual devices that act as a patch cable. The <ref
+ column="options"/> column must have the following key-value pair:
+ </p>
+ <dl>
+ <dt><code>peer</code></dt>
+ <dd>
+ The <ref column="name"/> of the <ref table="Interface"/> for
+ the other side of the patch. The named <ref
+ table="Interface"/>'s own <code>peer</code> option must specify
+ this <ref table="Interface"/>'s name. That is, the two patch
+ interfaces must have reversed <ref column="name"/> and
+ <code>peer</code> values.
+ </dd>
+ </dl>
+ </dd>
</dl>
</column>
</column>
</group>
+ <group title="Interface Status">
+ <p>
+ Status information about interfaces attached to bridges, updated every
+ 5 seconds. Not all interfaces have all of these properties; virtual
+ interfaces don't have a link speed, for example. Non-applicable
+ columns will have empty values.
+ </p>
+ <column name="admin_state">
+ <p>
+ The administrative state of the physical network link.
+ </p>
+ </column>
+
+ <column name="link_state">
+ <p>
+ The observed state of the physical network link. This is ordinarily
+ the link's carrier status. If the interface's <ref table="Port"/> is
+ a bond configured for miimon monitoring, it is instead the network
+ link's miimon status.
+ </p>
+ </column>
+
+ <column name="link_speed">
+ <p>
+ The negotiated speed of the physical network link.
+ Valid values are positive integers greater than 0.
+ </p>
+ </column>
+
+ <column name="duplex">
+ <p>
+ The duplex mode of the physical network link.
+ </p>
+ </column>
+
+ <column name="mtu">
+ <p>
+ The MTU (maximum transmission unit); i.e. the largest
+ amount of data that can fit into a single Ethernet frame.
+ The standard Ethernet MTU is 1500 bytes. Some physical media
+ and many kinds of virtual interfaces can be configured with
+ higher MTUs.
+ </p>
+ <p>
+ This column will be empty for an interface that does not
+ have an MTU as, for example, some kinds of tunnels do not.
+ </p>
+ </column>
+
+ <column name="status">
+ <p>
+ Key-value pairs that report port status. Supported status
+ values are <code>type</code>-dependent; some interfaces may not have
+ a valid <code>driver_name</code>, for example.
+ </p>
+ <p>The currently defined key-value pairs are:</p>
+ <dl>
+ <dt><code>driver_name</code></dt>
+ <dd>The name of the device driver controlling the network
+ adapter.</dd>
+ </dl>
+ <dl>
+ <dt><code>driver_version</code></dt>
+ <dd>The version string of the device driver controlling the
+ network adapter.</dd>
+ </dl>
+ <dl>
+ <dt><code>firmware_version</code></dt>
+ <dd>The version string of the network adapter's firmware, if
+ available.</dd>
+ </dl>
+ <dl>
+ <dt><code>source_ip</code></dt>
+ <dd>The source IP address used for an IPv4 tunnel end-point,
+ such as <code>gre</code> or <code>capwap</code>.</dd>
+ </dl>
+ <dl>
+ <dt><code>tunnel_egress_iface</code></dt>
+ <dd>Egress interface for tunnels. Currently only relevant for GRE
+ and CAPWAP tunnels. On Linux systems, this column will show
+ the name of the interface which is responsible for routing
+ traffic destined for the configured <code>remote_ip</code>.
+ This could be an internal interface such as a bridge port.</dd>
+ </dl>
+ <dl>
+ <dt><code>tunnel_egress_iface_carrier</code></dt>
+ <dd>Whether a carrier is detected on <ref
+ column="tunnel_egress_iface"/>. Valid values are <code>down</code>
+ and <code>up</code>.</dd>
+ </dl>
+ </column>
+ </group>
+
<group title="Ingress Policing">
+ <p>
+ These settings control ingress policing for packets received on this
+ interface. On a physical interface, this limits the rate at which
+ traffic is allowed into the system from the outside; on a virtual
+ interface (one connected to a virtual machine), this limits the rate at
+ which the VM is able to transmit.
+ </p>
+ <p>
+ Policing is a simple form of quality-of-service that simply drops
+ packets received in excess of the configured rate. Due to its
+ simplicity, policing is usually less accurate and less effective than
+ egress QoS (which is configured using the <ref table="QoS"/> and <ref
+ table="Queue"/> tables).
+ </p>
+ <p>
+ Policing is currently implemented only on Linux. The Linux
+ implementation uses a simple ``token bucket'' approach:
+ </p>
+ <ul>
+ <li>
+ The size of the bucket corresponds to <ref
+ column="ingress_policing_burst"/>. Initially the bucket is full.
+ </li>
+ <li>
+ Whenever a packet is received, its size (converted to tokens) is
+ compared to the number of tokens currently in the bucket. If the
+ required number of tokens are available, they are removed and the
+ packet is forwarded. Otherwise, the packet is dropped.
+ </li>
+ <li>
+ Whenever it is not full, the bucket is refilled with tokens at the
+ rate specified by <ref column="ingress_policing_rate"/>.
+ </li>
+ </ul>
+ <p>
+ Policing interacts badly with some network protocols, and especially
+ with fragmented IP packets. Suppose that there is enough network
+ activity to keep the bucket nearly empty all the time. Then this token
+ bucket algorithm will forward a single packet every so often, with the
+ period depending on packet size and on the configured rate. All of the
+ fragments of an IP packets are normally transmitted back-to-back, as a
+ group. In such a situation, therefore, only one of these fragments
+ will be forwarded and the rest will be dropped. IP does not provide
+ any way for the intended recipient to ask for only the remaining
+ fragments. In such a case there are two likely possibilities for what
+ will happen next: either all of the fragments will eventually be
+ retransmitted (as TCP will do), in which case the same problem will
+ recur, or the sender will not realize that its packet has been dropped
+ and data will simply be lost (as some UDP-based protocols will do).
+ Either way, it is possible that no forward progress will ever occur.
+ </p>
+ <column name="ingress_policing_rate">
+ <p>
+ Maximum rate for data received on this interface, in kbps. Data
+ received faster than this rate is dropped. Set to <code>0</code>
+ (the default) to disable policing.
+ </p>
+ </column>
+
<column name="ingress_policing_burst">
<p>Maximum burst size for data received on this interface, in kb. The
default burst size if set to <code>0</code> is 1000 kb. This value
has no effect if <ref column="ingress_policing_rate"/>
is <code>0</code>.</p>
- <p>The burst size should be at least the size of the interface's
- MTU.</p>
- </column>
-
- <column name="ingress_policing_rate">
- <p>Maximum rate for data received on this interface, in kbps. Data
- received faster than this rate is dropped. Set to <code>0</code> to
- disable policing.</p>
- <p>The meaning of ``ingress'' is from Open vSwitch's perspective. If
- configured on a physical interface, then it limits the rate at which
- traffic is allowed into the system from the outside. If configured
- on a virtual interface that is connected to a virtual machine, then
- it limits the rate at which the guest is able to transmit.</p>
+ <p>
+ Specifying a larger burst size lets the algorithm be more forgiving,
+ which is important for protocols like TCP that react severely to
+ dropped packets. The burst size should be at least the size of the
+ interface's MTU. Specifying a value that is numerically at least as
+ large as 10% of <ref column="ingress_policing_rate"/> helps TCP come
+ closer to achieving the full rate.
+ </p>
</column>
</group>
<group title="Other Features">
+
+ <column name="monitor">
+ Connectivity monitor configuration for this interface.
+ </column>
+
<column name="external_ids">
- <p>Key-value pairs that identify this interface's role in external
- systems. All of the currently defined key-value pairs specifically
+ Key-value pairs for use by external frameworks that integrate
+ with Open vSwitch, rather than by Open vSwitch itself. System
+ integrators should either use the Open vSwitch development
+ mailing list to coordinate on common key-value definitions, or
+ choose key names that are likely to be unique. The currently
+ defined common key-value pairs are:
+ <dl>
+ <dt><code>attached-mac</code></dt>
+ <dd>
+ The MAC address programmed into the ``virtual hardware'' for this
+ interface, in the form
+ <var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>.
+ For Citrix XenServer, this is the value of the <code>MAC</code>
+ field in the VIF record for this interface.</dd>
+ <dt><code>iface-id</code></dt>
+ <dd>A system-unique identifier for the interface. On XenServer,
+ this will commonly be the same as <code>xs-vif-uuid</code>.</dd>
+ </dl>
+ <p>
+ Additionally the following key-value pairs specifically
apply to an interface that represents a virtual Ethernet interface
connected to a virtual machine. These key-value pairs should not be
present for other types of interfaces. Keys whose names end
in <code>-uuid</code> have values that uniquely identify the entity
in question. For a Citrix XenServer hypervisor, these values are
UUIDs in RFC 4122 format. Other hypervisors may use other
- formats.</p>
- <p>The currently defined key-value pairs are:</p>
+ formats.
+ </p>
+ <p>The currently defined key-value pairs for XenServer are:</p>
<dl>
- <dt><code>vif-uuid</code></dt>
+ <dt><code>xs-vif-uuid</code></dt>
<dd>The virtual interface associated with this interface.</dd>
- <dt><code>network-uuid</code></dt>
+ <dt><code>xs-network-uuid</code></dt>
<dd>The virtual network to which this interface is attached.</dd>
- <dt><code>vm-uuid</code></dt>
+ <dt><code>xs-vm-uuid</code></dt>
<dd>The VM to which this interface belongs.</dd>
- <dt><code>vif-mac</code></dt>
- <dd>The MAC address programmed into the "virtual hardware" for this
- interface, in the
- form <var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>.
- For Citrix XenServer, this is the value of the <code>MAC</code>
- field in the VIF record for this interface.</dd>
+ </dl>
+ </column>
+
+ <column name="other_config">
+ Key-value pairs for rarely used interface features.
+ <dl>
+ <dt><code>lacp-port-priority</code></dt>
+ <dd> The LACP port priority of this <ref table="Interface"/>. In
+ LACP negotiations <ref table="Interface"/>s with numerically lower
+ priorities are preferred for aggregation. Must be a number between
+ 1 and 65535.</dd>
</dl>
</column>
defined types are listed below:</p>
<dl>
<dt><code>linux-htb</code></dt>
- <dd>Linux ``hierarchy token bucket'' classifier.</dd>
+ <dd>
+ Linux ``hierarchy token bucket'' classifier. See tc-htb(8) (also at
+ <code>http://linux.die.net/man/8/tc-htb</code>) and the HTB manual
+ (<code>http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm</code>)
+ for information on how this classifier works and how to configure it.
+ </dd>
+ </dl>
+ <dl>
+ <dt><code>linux-hfsc</code></dt>
+ <dd>
+ Linux "Hierarchical Fair Service Curve" classifier.
+ See <code>http://linux-ip.net/articles/hfsc.en/</code> for
+ information on how this classifier works.
+ </dd>
</dl>
</column>
<column name="other_config">
<p>Key-value pairs for configuring QoS features that depend on
<ref column="type"/>.</p>
- <p>The <code>linux-htb</code> class supports the following key-value
- pairs:</p>
+ <p>The <code>linux-htb</code> and <code>linux-hfsc</code> classes support
+ the following key-value pairs:</p>
<dl>
<dt><code>max-rate</code></dt>
<dd>Maximum rate shared by all queued traffic, in bit/s.
Mbps.</dd>
</dl>
</column>
+
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+ </column>
</table>
<table name="Queue" title="QoS output queue.">
column="type"/> of <code>min-rate</code> are:</p>
<dl>
<dt><code>min-rate</code></dt>
- <dd>Minimum guaranteed bandwidth, in bit/s. Required.</dd>
+ <dd>Minimum guaranteed bandwidth, in bit/s. Required. The
+ floor value is 1500 bytes/s (12,000 bit/s).</dd>
</dl>
<p>The key-value pairs defined for <ref table="QoS"/> <ref table="QoS"
column="type"/> of <code>linux-htb</code> are:</p>
<dl>
<dt><code>min-rate</code></dt>
- <dd>Minimum guaranteed bandwidth, in bit/s. Required.</dd>
+ <dd>Minimum guaranteed bandwidth, in bit/s.</dd>
<dt><code>max-rate</code></dt>
<dd>Maximum allowed bandwidth, in bit/s. Optional. If specified, the
queue's rate will not be allowed to exceed the specified value, even
a queue with a larger value receives any. Specific priority
values are unimportant; only relative ordering matters.</dd>
</dl>
+ <p>The key-value pairs defined for <ref table="QoS"/> <ref table="QoS"
+ column="type"/> of <code>linux-hfsc</code> are:</p>
+ <dl>
+ <dt><code>min-rate</code></dt>
+ <dd>Minimum guaranteed bandwidth, in bit/s.</dd>
+ <dt><code>max-rate</code></dt>
+ <dd>Maximum allowed bandwidth, in bit/s. Optional. If specified, the
+ queue's rate will not be allowed to exceed the specified value, even
+ if excess bandwidth is available. If unspecified, defaults to no
+ limit.</dd>
+ </dl>
+ </column>
+
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
</column>
</table>
+ <table name="Monitor" title="Connectivity Monitor configuration">
+ <p>
+ A <ref table="Monitor"/> attaches to an <ref table="Interface"/> to
+ implement 802.1ag Connectivity Fault Management (CFM). CFM allows a
+ group of Maintenance Points (MPs) called a Maintenance Association (MA)
+ to detect connectivity problems with each other. MPs within a MA should
+ have complete and exclusive interconnectivity. This is verified by
+ occasionally broadcasting Continuity Check Messages (CCMs) at a
+ configurable transmission interval. A <ref table="Monitor"/> is
+ responsible for collecting data about other MPs in its MA and
+ broadcasting CCMs.
+ </p>
+
+ <group title="Monitor Configuration">
+ <column name="mpid">
+ A Maintenance Point ID (MPID) uniquely identifies each endpoint within
+ a Maintenance Association (see <ref column="ma_name"/>). The MPID is
+ used to identify this <ref table="Monitor"/> to other endpoints in the
+ MA.
+ </column>
+
+ <column name="remote_mps">
+ A set of <ref table="Maintenance_Points"/> which this
+ <ref table="Monitor"/> should have connectivity to. If this
+ <ref table="Monitor"/> does not have connectivity to any MPs in this
+ set, or has connectivity to any MPs not in this set, a fault is
+ signaled.
+ </column>
+
+ <column name="ma_name">
+ A Maintenance Association (MA) name pairs with a Maintenance Domain
+ (MD) name to uniquely identify a MA. A MA is a group of endpoints who
+ have complete and exclusive interconnectivity. Defaults to
+ <code>ovs</code> if unset.
+ </column>
+
+ <column name="md_name">
+ A Maintenance Domain name pairs with a Maintenance Association name to
+ uniquely identify a MA. Defaults to <code>ovs</code> if unset.
+ </column>
+
+ <column name="interval">
+ The transmission interval of CCMs in milliseconds. Three missed CCMs
+ indicate a connectivity fault. Defaults to 1000ms.
+ </column>
+ </group>
+
+ <group title="Monitor Status">
+ <column name="fault">
+ Indicates a Connectivity Fault caused by a configuration error, a down
+ remote MP, or unexpected connectivity to a remote MAID or remote MP.
+ </column>
+ </group>
+ </table>
+
+ <table name="Maintenance_Point" title="Maintenance Point configuration">
+ <p>
+ A <ref table="Maintenance_Point"/> represents a MP which a
+ <ref table="Monitor"/> has or should have connectivity to.
+ </p>
+
+ <group title="Maintenance_Point Configuration">
+ <column name="mpid">
+ A Maintenance Point ID (MPID) uniquely identifies each endpoint within
+ a Maintenance Association. All MPs within a MA should have a unique
+ MPID.
+ </column>
+ </group>
+
+ <group title="Maintenance_Point Status">
+ <column name="fault">
+ Indicates a connectivity fault.
+ </column>
+ </group>
+ </table>
+
<table name="Mirror" title="Port mirroring (SPAN/RSPAN).">
<p>A port mirror within a <ref table="Bridge"/>.</p>
<p>A port mirror configures a bridge to send selected frames to special
</column>
<group title="Selecting Packets for Mirroring">
+ <p>
+ To be selected for mirroring, a given packet must enter or leave the
+ bridge through a selected port and it must also be in one of the
+ selected VLANs.
+ </p>
+
<column name="select_all">
If true, every packet arriving or departing on any port is
selected for mirroring.
</group>
<group title="Mirroring Destination Configuration">
+ <p>
+ These columns are mutually exclusive. Exactly one of them must be
+ nonempty.
+ </p>
+
<column name="output_port">
- <p>Output port for selected packets, if nonempty. Mutually exclusive
- with <ref column="output_vlan"/>.</p>
+ <p>Output port for selected packets, if nonempty.</p>
<p>Specifying a port for mirror output reserves that port exclusively
for mirroring. No frames other than those selected for mirroring
will be forwarded to the port, and any frames received on the port
</column>
<column name="output_vlan">
- <p>Output VLAN for selected packets, if nonempty. Mutually exclusive
- with <ref column="output_port"/>.</p>
+ <p>Output VLAN for selected packets, if nonempty.</p>
<p>The frames will be sent out all ports that trunk
<ref column="output_vlan"/>, as well as any ports with implicit VLAN
<ref column="output_vlan"/>. When a mirrored frame is sent out a
in the appropriate <ref table="Bridge"/> table or tables.</p>
</column>
</group>
+
+ <group title="Other Features">
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+ </column>
+ </group>
</table>
<table name="Controller" title="OpenFlow controller configuration.">
<p>An OpenFlow controller.</p>
- <p>Open vSwitch permits a bridge to have any number of OpenFlow
- controllers. When multiple controllers are configured, Open vSwitch
- connects to all of them simultaneously. OpenFlow 1.0 does not specify
- how multiple controllers coordinate in interacting with a single switch,
- so more than one controller should be specified only if the controllers
- are themselves designed to coordinate with each other.</p>
+ <p>
+ Open vSwitch supports two kinds of OpenFlow controllers:
+ </p>
+
+ <dl>
+ <dt>Primary controllers</dt>
+ <dd>
+ <p>
+ This is the kind of controller envisioned by the OpenFlow 1.0
+ specification. Usually, a primary controller implements a network
+ policy by taking charge of the switch's flow table.
+ </p>
+
+ <p>
+ Open vSwitch initiates and maintains persistent connections to
+ primary controllers, retrying the connection each time it fails or
+ drops. The <ref table="Bridge" column="fail_mode"/> column in the
+ <ref table="Bridge"/> table applies to primary controllers.
+ </p>
+
+ <p>
+ Open vSwitch permits a bridge to have any number of primary
+ controllers. When multiple controllers are configured, Open
+ vSwitch connects to all of them simultaneously. Because
+ OpenFlow 1.0 does not specify how multiple controllers
+ coordinate in interacting with a single switch, more than
+ one primary controller should be specified only if the
+ controllers are themselves designed to coordinate with each
+ other. (The Nicira-defined <code>NXT_ROLE</code> OpenFlow
+ vendor extension may be useful for this.)
+ </p>
+ </dd>
+ <dt>Service controllers</dt>
+ <dd>
+ <p>
+ These kinds of OpenFlow controller connections are intended for
+ occasional support and maintenance use, e.g. with
+ <code>ovs-ofctl</code>. Usually a service controller connects only
+ briefly to inspect or modify some of a switch's state.
+ </p>
+
+ <p>
+ Open vSwitch listens for incoming connections from service
+ controllers. The service controllers initiate and, if necessary,
+ maintain the connections from their end. The <ref table="Bridge"
+ column="fail_mode"/> column in the <ref table="Bridge"/> table does
+ not apply to service controllers.
+ </p>
+
+ <p>
+ Open vSwitch supports configuring any number of service controllers.
+ </p>
+ </dd>
+ </dl>
+
+ <p>
+ The <ref column="target"/> determines the type of controller.
+ </p>
<group title="Core Features">
<column name="target">
- <p>Connection method for controller.
- The following connection methods are currently
- supported:</p>
+ <p>Connection method for controller.</p>
+ <p>
+ The following connection methods are currently supported for primary
+ controllers:
+ </p>
<dl>
<dt><code>ssl:<var>ip</var></code>[<code>:<var>port</var></code>]</dt>
<dd>
<p>The specified SSL <var>port</var> (default: 6633) on the host at
- the given <var>ip</var>, which must be expressed as an IP address
- (not a DNS name). The <ref table="Open_vSwitch" column="ssl"/>
- column in the <ref table="Open_vSwitch"/> must point to a valid
- SSL configuration when this form is used.</p>
+ the given <var>ip</var>, which must be expressed as an IP address
+ (not a DNS name). The <ref table="Open_vSwitch" column="ssl"/>
+ column in the <ref table="Open_vSwitch"/> table must point to a
+ valid SSL configuration when this form is used.</p>
<p>SSL support is an optional feature that is not always built as
part of Open vSwitch.</p>
</dd>
<dd>The specified TCP <var>port</var> (default: 6633) on the host at
the given <var>ip</var>, which must be expressed as an IP address
(not a DNS name).</dd>
- <dt><code>discover</code></dt>
+ </dl>
+ <p>
+ The following connection methods are currently supported for service
+ controllers:
+ </p>
+ <dl>
+ <dt><code>pssl:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
+ <dd>
+ <p>
+ Listens for SSL connections on the specified TCP <var>port</var>
+ (default: 6633). If <var>ip</var>, which must be expressed as an
+ IP address (not a DNS name), is specified, then connections are
+ restricted to the specified local IP address.
+ </p>
+ <p>
+ The <ref table="Open_vSwitch" column="ssl"/> column in the <ref
+ table="Open_vSwitch"/> table must point to a valid SSL
+ configuration when this form is used.
+ </p>
+ <p>SSL support is an optional feature that is not always built as
+ part of Open vSwitch.</p>
+ </dd>
+ <dt><code>ptcp:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
<dd>
- <p>Enables controller discovery.</p>
- <p>In controller discovery mode, Open vSwitch broadcasts a DHCP
- request with vendor class identifier <code>OpenFlow</code> across
- all of the bridge's network devices. It will accept any valid
- DHCP reply that has the same vendor class identifier and includes
- a vendor-specific option with code 1 whose contents are a string
- specifying the location of the controller in the same format as
- <ref column="target"/>.</p>
- <p>The DHCP reply may also, optionally, include a vendor-specific
- option with code 2 whose contents are a string specifying the URI
- to the base of the OpenFlow PKI
- (e.g. <code>http://192.168.0.1/openflow/pki</code>). This URI is
- used only for bootstrapping the OpenFlow PKI at initial switch
- setup; <code>ovs-vswitchd</code> does not use it at all.</p>
+ Listens for connections on the specified TCP <var>port</var>
+ (default: 6633). If <var>ip</var>, which must be expressed as an
+ IP address (not a DNS name), is specified, then connections are
+ restricted to the specified local IP address.
</dd>
- <dt><code>none</code></dt>
- <dd>Disables the controller.</dd>
</dl>
- <p>When multiple controllers are configured for a single bridge, the
- <ref column="target"/> values must be unique. Duplicate
- <ref column="target"/> values yield unspecified results.</p>
+
<p>When multiple controllers are configured for a single bridge, the
+ <ref column="target"/> values must be unique. Duplicate
+ <ref column="target"/> values yield unspecified results.</p>
</column>
<column name="connection_mode">
- <p>If it is specified, this setting must be one of the following
- strings that describes how Open vSwitch contacts this OpenFlow
- controller over the network:</p>
-
- <dl>
- <dt><code>in-band</code></dt>
- <dd>In this mode, this controller's OpenFlow traffic travels over the
- bridge associated with the controller. With this setting, Open
- vSwitch allows traffic to and from the controller regardless of the
- contents of the OpenFlow flow table. (Otherwise, Open vSwitch
- would never be able to connect to the controller, because it did
- not have a flow to enable it.) This is the most common connection
- mode because it is not necessary to maintain two independent
- networks.</dd>
- <dt><code>out-of-band</code></dt>
- <dd>In this mode, OpenFlow traffic uses a control network separate
- from the bridge associated with this controller, that is, the
- bridge does not use any of its own network devices to communicate
- with the controller. The control network must be configured
- separately, before or after <code>ovs-vswitchd</code> is started.
- </dd>
- </dl>
-
- <p>If not specified, the default is implementation-specific. If
- <ref column="target"/> is <code>discover</code>, the connection mode
- is always treated as <code>in-band</code> regardless of the actual
- setting.</p>
+ <p>If it is specified, this setting must be one of the following
+ strings that describes how Open vSwitch contacts this OpenFlow
+ controller over the network:</p>
+
+ <dl>
+ <dt><code>in-band</code></dt>
+ <dd>In this mode, this controller's OpenFlow traffic travels over the
+ bridge associated with the controller. With this setting, Open
+ vSwitch allows traffic to and from the controller regardless of the
+ contents of the OpenFlow flow table. (Otherwise, Open vSwitch
+ would never be able to connect to the controller, because it did
+ not have a flow to enable it.) This is the most common connection
+ mode because it is not necessary to maintain two independent
+ networks.</dd>
+ <dt><code>out-of-band</code></dt>
+ <dd>In this mode, OpenFlow traffic uses a control network separate
+ from the bridge associated with this controller, that is, the
+ bridge does not use any of its own network devices to communicate
+ with the controller. The control network must be configured
+ separately, before or after <code>ovs-vswitchd</code> is started.
+ </dd>
+ </dl>
+
+ <p>If not specified, the default is implementation-specific.</p>
</column>
</group>
number of seconds, it will send a probe. If a response is not
received for the same additional amount of time, Open vSwitch
assumes the connection has been broken and attempts to reconnect.
- Default is implementation-specific.
+ Default is implementation-specific. A value of 0 disables
+ inactivity probes.
</column>
</group>
</column>
</group>
- <group title="Additional Discovery Configuration">
- <p>These values are considered only when <ref column="target"/>
- is <code>discover</code>.</p>
-
- <column name="discover_accept_regex">
- A POSIX
- extended regular expression against which the discovered controller
- location is validated. The regular expression is implicitly
- anchored at the beginning of the controller location string, as
- if it begins with <code>^</code>. If not specified, the default
- is implementation-specific.
- </column>
-
- <column name="discover_update_resolv_conf">
- Whether to update <code>/etc/resolv.conf</code> when the
- controller is discovered. If not specified, the default
- is implementation-specific. Open vSwitch will only modify
- <code>/etc/resolv.conf</code> if the DHCP response that it receives
- specifies one or more DNS servers.
- </column>
- </group>
-
<group title="Additional In-Band Configuration">
<p>These values are considered only in in-band control mode (see
- <ref column="connection_mode"/>) and only when <ref column="target"/>
- is not <code>discover</code>. (For controller discovery, the network
- configuration obtained via DHCP is used instead.)</p>
+ <ref column="connection_mode"/>).</p>
<p>When multiple controllers are configured on a single bridge, there
- should be only one set of unique values in these columns. If different
- values are set for these columns in different controllers, the effect
- is unspecified.</p>
+ should be only one set of unique values in these columns. If different
+ values are set for these columns in different controllers, the effect
+ is unspecified.</p>
<column name="local_ip">
The IP address to configure on the local port,
this network has no gateway.
</column>
</group>
+
+ <group title="Other Features">
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+ </column>
+ </group>
+
+ <group title="Controller Status">
+ <column name="is_connected">
+ <code>true</code> if currently connected to this controller,
+ <code>false</code> otherwise.
+ </column>
+
+ <column name="role">
+ <p>The level of authority this controller has on the associated
+ bridge. Possible values are:</p>
+ <dl>
+ <dt><code>other</code></dt>
+ <dd>Allows the controller access to all OpenFlow features.</dd>
+ <dt><code>master</code></dt>
+ <dd>Equivalent to <code>other</code>, except that there may be at
+ most one master controller at a time. When a controller configures
+ itself as <code>master</code>, any existing master is demoted to
+ the <code>slave</code>role.</dd>
+ <dt><code>slave</code></dt>
+ <dd>Allows the controller read-only access to OpenFlow features.
+ Attempts to modify the flow table will be rejected with an
+ error. Slave controllers do not receive OFPT_PACKET_IN or
+ OFPT_FLOW_REMOVED messages, but they do receive OFPT_PORT_STATUS
+ messages.</dd>
+ </dl>
+ </column>
+
+ <column name="status">
+ <p>Key-value pairs that report controller status.</p>
+ <dl>
+ <dt><code>last_error</code></dt>
+ <dd>A human-readable description of the last error on the connection
+ to the controller; i.e. <code>strerror(errno)</code>. This key
+ will exist only if an error has occurred.</dd>
+ <dt><code>state</code></dt>
+ <dd>The state of the connection to the controller. Possible values
+ are: <code>VOID</code> (connection is disabled),
+ <code>BACKOFF</code> (attempting to reconnect at an increasing
+ period), <code>CONNECTING</code> (attempting to connect),
+ <code>ACTIVE</code> (connected, remote host responsive), and
+ <code>IDLE</code> (remote host idle, sending keep-alive). These
+ values may change in the future. They are provided only for human
+ consumption.</dd>
+ <dt><code>sec_since_connect</code></dt>
+ <dd>The amount of time since this controller last successfully
+ connected to the switch (in seconds). Value is empty if controller
+ has never successfully connected.</dd>
+ <dt><code>sec_since_disconnect</code></dt>
+ <dd>The amount of time since this controller last disconnected from
+ the switch (in seconds). Value is empty if controller has never
+ disconnected.</dd>
+ </dl>
+ </column>
+ </group>
+ </table>
+
+ <table name="Manager" title="OVSDB management connection.">
+ <p>
+ Configuration for a database connection to an Open vSwitch database
+ (OVSDB) client.
+ </p>
+
+ <p>
+ This table primarily configures the Open vSwitch database
+ (<code>ovsdb-server</code>), not the Open vSwitch switch
+ (<code>ovs-vswitchd</code>). The switch does read the table to determine
+ what connections should be treated as in-band.
+ </p>
+
+ <p>
+ The Open vSwitch database server can initiate and maintain active
+ connections to remote clients. It can also listen for database
+ connections.
+ </p>
+
+ <group title="Core Features">
+ <column name="target">
+ <p>Connection method for managers.</p>
+ <p>
+ The following connection methods are currently supported:
+ </p>
+ <dl>
+ <dt><code>ssl:<var>ip</var></code>[<code>:<var>port</var></code>]</dt>
+ <dd>
+ <p>
+ The specified SSL <var>port</var> (default: 6632) on the host at
+ the given <var>ip</var>, which must be expressed as an IP address
+ (not a DNS name). The <ref table="Open_vSwitch" column="ssl"/>
+ column in the <ref table="Open_vSwitch"/> table must point to a
+ valid SSL configuration when this form is used.
+ </p>
+ <p>
+ SSL support is an optional feature that is not always built as
+ part of Open vSwitch.
+ </p>
+ </dd>
+
+ <dt><code>tcp:<var>ip</var></code>[<code>:<var>port</var></code>]</dt>
+ <dd>
+ The specified TCP <var>port</var> (default: 6632) on the host at
+ the given <var>ip</var>, which must be expressed as an IP address
+ (not a DNS name).
+ </dd>
+ <dt><code>pssl:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
+ <dd>
+ <p>
+ Listens for SSL connections on the specified TCP <var>port</var>
+ (default: 6632). If <var>ip</var>, which must be expressed as an
+ IP address (not a DNS name), is specified, then connections are
+ restricted to the specified local IP address.
+ </p>
+ <p>
+ The <ref table="Open_vSwitch" column="ssl"/> column in the <ref
+ table="Open_vSwitch"/> table must point to a valid SSL
+ configuration when this form is used.
+ </p>
+ <p>
+ SSL support is an optional feature that is not always built as
+ part of Open vSwitch.
+ </p>
+ </dd>
+ <dt><code>ptcp:</code>[<var>port</var>][<code>:<var>ip</var></code>]</dt>
+ <dd>
+ Listens for connections on the specified TCP <var>port</var>
+ (default: 6632). If <var>ip</var>, which must be expressed as an
+ IP address (not a DNS name), is specified, then connections are
+ restricted to the specified local IP address.
+ </dd>
+ </dl>
+ <p>When multiple managers are configured, the <ref column="target"/>
+ values must be unique. Duplicate <ref column="target"/> values yield
+ unspecified results.</p>
+ </column>
+
+ <column name="connection_mode">
+ <p>
+ If it is specified, this setting must be one of the following strings
+ that describes how Open vSwitch contacts this OVSDB client over the
+ network:
+ </p>
+
+ <dl>
+ <dt><code>in-band</code></dt>
+ <dd>
+ In this mode, this connection's traffic travels over a bridge
+ managed by Open vSwitch. With this setting, Open vSwitch allows
+ traffic to and from the client regardless of the contents of the
+ OpenFlow flow table. (Otherwise, Open vSwitch would never be able
+ to connect to the client, because it did not have a flow to enable
+ it.) This is the most common connection mode because it is not
+ necessary to maintain two independent networks.
+ </dd>
+ <dt><code>out-of-band</code></dt>
+ <dd>
+ In this mode, the client's traffic uses a control network separate
+ from that managed by Open vSwitch, that is, Open vSwitch does not
+ use any of its own network devices to communicate with the client.
+ The control network must be configured separately, before or after
+ <code>ovs-vswitchd</code> is started.
+ </dd>
+ </dl>
+
+ <p>
+ If not specified, the default is implementation-specific.
+ </p>
+ </column>
+ </group>
+
+ <group title="Client Failure Detection and Handling">
+ <column name="max_backoff">
+ Maximum number of milliseconds to wait between connection attempts.
+ Default is implementation-specific.
+ </column>
+
+ <column name="inactivity_probe">
+ Maximum number of milliseconds of idle time on connection to the client
+ before sending an inactivity probe message. If Open vSwitch does not
+ communicate with the client for the specified number of seconds, it
+ will send a probe. If a response is not received for the same
+ additional amount of time, Open vSwitch assumes the connection has been
+ broken and attempts to reconnect. Default is implementation-specific.
+ A value of 0 disables inactivity probes.
+ </column>
+ </group>
+
+ <group title="Other Features">
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+ </column>
+ </group>
+
+ <group title="Status">
+ <column name="is_connected">
+ <code>true</code> if currently connected to this manager,
+ <code>false</code> otherwise.
+ </column>
+
+ <column name="status">
+ <p>Key-value pairs that report manager status.</p>
+ <dl>
+ <dt><code>last_error</code></dt>
+ <dd>A human-readable description of the last error on the connection
+ to the manager; i.e. <code>strerror(errno)</code>. This key
+ will exist only if an error has occurred.</dd>
+ </dl>
+ <dl>
+ <dt><code>state</code></dt>
+ <dd>The state of the connection to the manager. Possible values
+ are: <code>VOID</code> (connection is disabled),
+ <code>BACKOFF</code> (attempting to reconnect at an increasing
+ period), <code>CONNECTING</code> (attempting to connect),
+ <code>ACTIVE</code> (connected, remote host responsive), and
+ <code>IDLE</code> (remote host idle, sending keep-alive). These
+ values may change in the future. They are provided only for human
+ consumption.</dd>
+ </dl>
+ <dl>
+ <dt><code>sec_since_connect</code></dt>
+ <dd>The amount of time since this manager last successfully connected
+ to the database (in seconds). Value is empty if manager has never
+ successfully connected.</dd>
+ </dl>
+ <dl>
+ <dt><code>sec_since_disconnect</code></dt>
+ <dd>The amount of time since this manager last disconnected from the
+ database (in seconds). Value is empty if manager has never
+ disconnected.</dd>
+ </dl>
+ </column>
+ </group>
</table>
<table name="NetFlow">
disambiguate the traffic.</p>
<p>When this option is enabled, a maximum of 508 ports are supported.</p>
</column>
+
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+ </column>
</table>
<table name="SSL">
SSL connection to a man-in-the-middle attack obtaining the initial
CA certificate.</em> It may still be useful for bootstrapping.
</column>
+
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+ </column>
</table>
<table name="sFlow">
sFlow targets in the form
<code><var>ip</var>:<var>port</var></code>.
</column>
+
+ <column name="external_ids">
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+ </column>
</table>
<table name="Capability">
git://git.onelab.eu / sliver-openvswitch.git / blobdiff