### Configuration options for openvswitch
-# Copyright (C) 2009, 2010 Nicira Networks, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved. This file is offered as-is,
-# without warranty of any kind.
-
-# ENABLE_BRCOMPAT: If 'y' than emulate linux bridging interfaces
-# using the brcompat kernel module and ovs-brcompatd daemon
-# This is required and enabled by default for XenServer 5.5.0,
-# and not required and not enabled by default for later versions.
-# ENABLE_BRCOMPAT=?
-
-# ENABLE_FAKE_PROC_NET: If 'y' then emulate linux bonding and vlan
-# files in /proc as if the bonding and vlan demultiplexing done in
-# ovs-vswitchd were being implemented using existing Linux mechanisms.
-# This is useful in some cases when replacing existing solutions.
-# This is required and enabled by default for XenServer 5.5.0,
-# and not required and not enabled by default for later versions.
-# ENABLE_FAKE_PROC_NET=?
-
-# ENABLE_XENSERVERD: If 'y' then monitor system for changes in pool membership
-# This is required and enabled by default for XenServer 5.5.0,
-# and not required and not enabled by default for later versions.
-# ENABLE_XENSERVERD=?
-
-# ENABLE_MONITOR: If 'y' then monitor daemon processes and restart them
-# if they die due to an error signal.
-# ENABLE_MONITOR=y
-
-# FORCE_COREFILES: If 'y' then core files will be enabled.
-# FORCE_COREFILES=y
+# Copyright (C) 2009, 2010, 2011 Nicira, Inc.
-# COREFILE_PATTERN: Pattern used to determine path and filename for
-# core files when FORCE_COREFILES is 'y'. This is Linux specific.
-# See the manpage for "core".
-# COREFILE_PATTERN="/var/xen/openvswitch/%e-%t"
+# FORCE_COREFILES: If 'yes' then core files will be enabled.
+# FORCE_COREFILES=yes
-# OVSDB_SERVER_REMOTES: Space-separated list of methods on which to have
-# ovsdb-server listen or connect for a JSON-RPC connection.
-# OVSDB_SERVER_REMOTES="punix:/var/run/openvswitch/db.sock db:Open_vSwitch,managers"
-
-# OVSDB_SERVER_DB: File for which ovsdb-server uses for storage.
-# OVSDB_SERVER_DB=/etc/openvswitch/conf.db
-
-# OVSDB_SERVER_PIDFILE: File in which to store the pid of the running
-# ovsdb-server.
-# OVSDB_SERVER_PIDFILE=/var/run/openvswitch/ovsdb-server.pid
-
-# OVSDB_SERVER_RUN_DIR: Set the directory in which ovsdb-server should be
-# run. This mainly affects where core files will be placed.
-# OVSDB_SERVER_RUN_DIR=/var/xen/openvswitch
-
-# OVSDB_SERVER_PRIORITY: "nice" priority at which to run ovsdb-server and
-# related processes.
+# OVSDB_SERVER_PRIORITY: "nice" priority at which to run ovsdb-server.
+#
# OVSDB_SERVER_PRIORITY=-10
-# OVSDB_SERVER_LOGFILE: File to send the FILE_LOGLEVEL log messages to.
-# OVSDB_SERVER_LOGFILE=/var/log/openvswitch/ovsdb-server.log
-
-# OVSDB_SERVER_FILE_LOGLEVEL: Log level at which to log into the
-# OVSDB_SERVER_LOG file. If this is null or not set the logfile will
-# not be created and nothing will be sent to it. This is the
-# default. The available options are: EMER, WARN, INFO and DBG.
-# OVSDB_SERVER_FILE_LOGLEVEL=""
-
-# OVSDB_SERVER_SYSLOG_LOGLEVEL: Log level at which to log into syslog. If
-# this is null or not set the default is to log to syslog
-# emergency and warning level messages only.
-# OVSDB_SERVER_SYSLOG_LOGLEVEL="WARN"
-
-# OVSDB_SERVER_MEMLEAK_LOGFILE: File for logging memory leak data.
-# Enabling this option will slow ovsdb-server significantly. Do not
-# enable it except to debug a suspected memory leak. Use the
-# ovs-parse-leaks utility included with Open vSwitch to parse the
-# log file. For best results, you also need debug symbols.
-# OVSDB_SERVER_MEMLEAK_LOGFILE=""
-
-# OVSDB_SERVER_STRACE_LOG: File for logging strace output.
-# If this is set to a nonempty string, then ovsdb-server will run
-# under strace, whose output will be logged to the specified file.
-# Enabling this option will slow ovsdb-server significantly.
-# OVSDB_SERVER_STRACE_LOG and OVSDB_SERVER_VALGRIND_LOG are mutually
-# exclusive.
-# OVSDB_SERVER_STRACE_LOG=""
-
-# OVSDB_SERVER_STRACE_OPT: Options to pass to strace.
-# This option's value is honored only when OVSDB_SERVER_STRACE_LOG is
-# set to a nonempty string.
-# OVSDB_SERVER_STRACE_OPT=""
-
-# OVSDB_SERVER_VALGRIND_LOG: File for logging valgrind output.
-# If this is set to a nonempty string, then ovsdb-server will run
-# under valgrind, whose output will be logged to the specified file.
-# Enabling this option will slow ovsdb-server by 100X or more.
-# valgrind is not installed by default on XenServer systems; you must
-# install it by hand to usefully enable this option.
-# OVSDB_SERVER_STRACE_LOG and OVSDB_SERVER_VALGRIND_LOG are mutually
-# exclusive.
-# OVSDB_SERVER_VALGRIND_LOG=""
-
-# OVSDB_SERVER_VALGRIND_OPT: Options to pass to valgrind.
-# This option's value is honored only when OVSDB_SERVER_VALGRIND_LOG is
-# set to a nonempty string.
-# OVSDB_SERVER_VALGRIND_OPT=""
-
-# VSWITCHD_OVSDB_SERVER: Method to have ovs-vswitchd initiate a JSON-RPC
-# connection to an ovsdb-server instance.
-# VSWITCHD_OVSDB_SERVER=unix:/var/run/openvswitch/db.sock
-
-# VSWITCHD_OVSDB_SCHEMA: Schema file to use for generating a new OVSDB
-# ovs-vswitchd database.
-# VSWITCHD_OVSDB_SCHEMA=/usr/share/openvswitch/vswitch.ovsschema
-
-# VSWITCHD_PIDFILE: File in which to store the pid of the running
-# ovs-vswitchd.
-# VSWITCHD_PIDFILE=/var/run/openvswitch/ovs-vswitchd.pid
-
-# VSWITCHD_RUN_DIR: Set the directory in which ovs-vswitchd should be
-# run. This mainly affects where core files will be placed.
-# VSWITCHD_RUN_DIR=/var/xen/openvswitch
-
-# VSWITCHD_PRIORITY: "nice" priority at which to run ovs-vswitchd and related
-# processes.
+# VSWITCHD_PRIORITY: "nice" priority at which to run ovs-vswitchd.
# VSWITCHD_PRIORITY=-10
# VSWITCHD_MLOCKALL: Whether to pass ovs-vswitchd the --mlockall option.
# concurrent VM import operations.
# VSWITCHD_MLOCKALL=yes
-# VSWITCHD_LOGFILE: File to send the FILE_LOGLEVEL log messages to.
-# VSWITCHD_LOGFILE=/var/log/openvswitch/ovs-vswitchd.log
-
-# VSWITCHD_FILE_LOGLEVEL: Log level at which to log into the
-# VSWITCHD_LOG file. If this is null or not set the logfile will
-# not be created and nothing will be sent to it. This is the
-# default. The available options are: EMER, WARN, INFO and DBG.
-# VSWITCHD_FILE_LOGLEVEL=""
-
-# VSWITCHD_SYSLOG_LOGLEVEL: Log level at which to log into syslog. If
-# this is null or not set the default is to log to syslog
-# emergency and warning level messages only.
-# VSWITCHD_SYSLOG_LOGLEVEL="WARN"
-
-# VSWITCHD_MEMLEAK_LOGFILE: File for logging memory leak data.
-# Enabling this option will slow ovs-vswitchd significantly. Do not
-# enable it except to debug a suspected memory leak. Use the
-# ovs-parse-leaks utility included with Open vSwitch to parse the
-# log file. For best results, you also need debug symbols.
-# VSWITCHD_MEMLEAK_LOGFILE=""
-
-# VSWITCHD_STRACE_LOG: File for logging strace output.
-# If this is set to a nonempty string, then ovs-vswitchd will run
-# under strace, whose output will be logged to the specified file.
-# Enabling this option will slow ovs-vswitchd significantly.
-# VSWITCHD_STRACE_LOG and VSWITCHD_VALGRIND_LOG are mutually exclusive.
-# VSWITCHD_STRACE_LOG=""
-
-# VSWITCHD_STRACE_OPT: Options to pass to strace.
-# This option's value is honored only when VSWITCHD_STRACE_LOG is
-# set to a nonempty string.
-# VSWITCHD_STRACE_OPT=""
-
-# VSWITCHD_VALGRIND_LOG: File for logging valgrind output.
-# If this is set to a nonempty string, then ovs-vswitchd will run
-# under valgrind, whose output will be logged to the specified file.
-# Enabling this option will slow ovs-vswitchd by 100X or more.
-# valgrind is not installed by default on XenServer systems; you must
-# install it by hand to usefully enable this option.
-# VSWITCHD_STRACE_LOG and VSWITCHD_VALGRIND_LOG are mutually exclusive.
-# VSWITCHD_VALGRIND_LOG=""
-
-# VSWITCHD_VALGRIND_OPT: Options to pass to valgrind.
-# This option's value is honored only when VSWITCHD_VALGRIND_LOG is
-# set to a nonempty string.
-# VSWITCHD_VALGRIND_OPT=""
-
-# BRCOMPATD_PIDFILE: File in which to store the pid of the running
-# ovs-brcompatd (the Linux bridge compatibility daemon for ovs-vswitchd).
-# If this is the empty string, ovs-brcompatd will not be started and
-# the brcompat_mod kernel module will not be inserted. Note that
-# the default is to use brcompat!
-# BRCOMPATD_PIDFILE=/var/run/openvswitch/ovs-brcompatd.pid
-
-# BRCOMPATD_RUN_DIR: Set the directory in which ovs-brcompatd should be
-# run. This mainly affects where core files will be placed.
-# BRCOMPATD_RUN_DIR=/var/xen/openvswitch
-
-# BRCOMPATD_PRIORITY: "nice" priority at which to run ovs-vswitchd and related
-# processes.
-# BRCOMPATD_PRIORITY=-10
-
-# BRCOMPATD_LOGFILE: File to send the FILE_LOGLEVEL log messages to.
-# BRCOMPATD_LOGFILE=/var/log/openvswitch/ovs-brcompatd.log
-
-# BRCOMPATD_FILE_LOGLEVEL: Log level at which to log into the
-# BRCOMPATD_LOG file. If this is null or not set the logfile will
-# not be created and nothing will be sent to it. This is the
-# default. The available options are: EMER, WARN, INFO and DBG.
-# BRCOMPATD_FILE_LOGLEVEL=""
-
-# BRCOMPATD_SYSLOG_LOGLEVEL: Log level at which to log into syslog. If
-# this is null or not set the default is to log to syslog
-# emergency and warning level messages only.
-# BRCOMPATD_SYSLOG_LOGLEVEL="WARN"
-
-# BRCOMPATD_MEMLEAK_LOGFILE: File for logging memory leak data.
-# Enabling this option will slow ovs-brcompatd significantly. Do not
-# enable it except to debug a suspected memory leak. Use the
-# ovs-parse-leaks utility included with Open vSwitch to parse the
-# log file. For best results, you also need debug symbols.
-# BRCOMPATD_MEMLEAK_LOGFILE=""
-
-# BRCOMPATD_STRACE_LOG: File for logging strace output.
-# If this is set to a nonempty string, then ovs-brcompatd will run
-# under strace, whose output will be logged to the specified file.
-# Enabling this option will slow brcompatd significantly.
-# BRCOMPATD_STRACE_LOG and BRCOMPATD_VALGRIND_LOG are mutually exclusive.
-# BRCOMPATD_STRACE_LOG=""
-
-# BRCOMPATD_STRACE_OPT: Options to pass to strace.
-# This option's value is honored only when BRCOMPATD_STRACE_LOG is
-# set to a nonempty string.
-# BRCOMPATD_STRACE_OPT=""
-
-# BRCOMPATD_VALGRIND_LOG: File for logging valgrind output.
-# If this is set to a nonempty string, then ovs-brcompatd will run
-# under valgrind, whose output will be logged to the specified file.
-# Enabling this option will slow brcompatd by 100X or more.
-# valgrind is not installed by default on XenServer systems; you must
-# install it by hand to usefully enable this option.
-# BRCOMPATD_STRACE_LOG and BRCOMPATD_VALGRIND_LOG are mutually exclusive.
-# BRCOMPATD_VALGRIND_LOG=""
-
-# BRCOMPATD_VALGRIND_OPT: Options to pass to valgrind.
-# This option's value is honored only when BRCOMPATD_VALGRIND_LOG is
-# set to a nonempty string.
-# BRCOMPATD_VALGRIND_OPT=""
-
-# XENSERVERD_PIDFILE: File in which to store the pid of the running
-# ovs-xenserved.
-# XENSERVERD_PIDFILE=/var/run/openvswitch/ovs-xenserverd.pid
-
-# XENSERVERD_RUN_DIR: Set the directory in which ovs-xenserverd should be
-# run. This mainly affects where core files will be placed.
-# XENSERVERD_RUN_DIR=/var/xen/openvswitch
+# OVS_CTL_OPTS: Extra options to pass to ovs-ctl. This is, for example,
+# a suitable place to specify --ovs-vswitchd-wrapper=valgrind.
+# OVS_CTL_OPTS=