+++ /dev/null
-# This is an example configuration file for the LVM2 system.
-# It contains the default settings that would be used if there was no
-# /etc/lvm/lvm.conf file.
-#
-# Refer to 'man lvm.conf' for further information including the file layout.
-#
-# To put this file in a different directory and override /etc/lvm set
-# the environment variable LVM_SYSTEM_DIR before running the tools.
-
-
-# This section allows you to configure which block devices should
-# be used by the LVM system.
-devices {
-
- # Where do you want your volume groups to appear ?
- dir = "/dev"
-
- # An array of directories that contain the device nodes you wish
- # to use with LVM2.
- scan = [ "/dev" ]
-
- # A filter that tells LVM2 to only use a restricted set of devices.
- # The filter consists of an array of regular expressions. These
- # expressions can be delimited by a character of your choice, and
- # prefixed with either an 'a' (for accept) or 'r' (for reject).
- # The first expression found to match a device name determines if
- # the device will be accepted or rejected (ignored). Devices that
- # don't match any patterns are accepted.
-
- # Remember to run vgscan after you change this parameter to ensure
- # that the cache file gets regenerated (see below).
-
- # By default we accept every block device:
- filter = [ "a/.*/" ]
-
- # Exclude the cdrom drive
- # filter = [ "r|/dev/cdrom|" ]
-
- # When testing I like to work with just loopback devices:
- # filter = [ "a/loop/", "r/.*/" ]
-
- # Or maybe all loops and ide drives except hdc:
- # filter =[ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
-
- # Use anchors if you want to be really specific
- # filter = [ "a|^/dev/hda8$|", "r/.*/" ]
-
- # The results of the filtering are cached on disk to avoid
- # rescanning dud devices (which can take a very long time). By
- # default this cache file is hidden in the /etc/lvm directory.
- # It is safe to delete this file: the tools regenerate it.
- cache = "/etc/lvm/.cache"
-
- # You can turn off writing this cache file by setting this to 0.
- write_cache_state = 1
-
- # Advanced settings.
-
- # List of pairs of additional acceptable block device types found
- # in /proc/devices with maximum (non-zero) number of partitions.
- # types = [ "fd", 16 ]
-
- # If sysfs is mounted (2.6 kernels) restrict device scanning to
- # the block devices it believes are valid.
- # 1 enables; 0 disables.
- sysfs_scan = 1
-
- # By default, LVM2 will ignore devices used as components of
- # software RAID (md) devices by looking for md superblocks.
- # 1 enables; 0 disables.
- md_component_detection = 1
-}
-
-# This section that allows you to configure the nature of the
-# information that LVM2 reports.
-log {
-
- # Controls the messages sent to stdout or stderr.
- # There are three levels of verbosity, 3 being the most verbose.
- verbose = 0
-
- # Should we send log messages through syslog?
- # 1 is yes; 0 is no.
- syslog = 1
-
- # Should we log error and debug messages to a file?
- # By default there is no log file.
- #file = "/var/log/lvm2.log"
-
- # Should we overwrite the log file each time the program is run?
- # By default we append.
- overwrite = 0
-
- # What level of log messages should we send to the log file and/or syslog?
- # There are 6 syslog-like log levels currently in use - 2 to 7 inclusive.
- # 7 is the most verbose (LOG_DEBUG).
- level = 0
-
- # Format of output messages
- # Whether or not (1 or 0) to indent messages according to their severity
- indent = 1
-
- # Whether or not (1 or 0) to display the command name on each line output
- command_names = 0
-
- # A prefix to use before the message text (but after the command name,
- # if selected). Default is two spaces, so you can see/grep the severity
- # of each message.
- prefix = " "
-
- # To make the messages look similar to the original LVM tools use:
- # indent = 0
- # command_names = 1
- # prefix = " -- "
-
- # Set this if you want log messages during activation.
- # Don't use this in low memory situations (can deadlock).
- # activation = 0
-}
-
-# Configuration of metadata backups and archiving. In LVM2 when we
-# talk about a 'backup' we mean making a copy of the metadata for the
-# *current* system. The 'archive' contains old metadata configurations.
-# Backups are stored in a human readeable text format.
-backup {
-
- # Should we maintain a backup of the current metadata configuration ?
- # Use 1 for Yes; 0 for No.
- # Think very hard before turning this off!
- backup = 1
-
- # Where shall we keep it ?
- # Remember to back up this directory regularly!
- backup_dir = "/etc/lvm/backup"
-
- # Should we maintain an archive of old metadata configurations.
- # Use 1 for Yes; 0 for No.
- # On by default. Think very hard before turning this off.
- archive = 1
-
- # Where should archived files go ?
- # Remember to back up this directory regularly!
- archive_dir = "/etc/lvm/archive"
-
- # What is the minimum number of archive files you wish to keep ?
- retain_min = 10
-
- # What is the minimum time you wish to keep an archive file for ?
- retain_days = 30
-}
-
-# Settings for the running LVM2 in shell (readline) mode.
-shell {
-
- # Number of lines of history to store in ~/.lvm_history
- history_size = 100
-}
-
-
-# Miscellaneous global LVM2 settings
-global {
-
- # The file creation mask for any files and directories created.
- # Interpreted as octal if the first digit is zero.
- umask = 077
-
- # Allow other users to read the files
- #umask = 022
-
- # Enabling test mode means that no changes to the on disk metadata
- # will be made. Equivalent to having the -t option on every
- # command. Defaults to off.
- test = 0
-
- # Whether or not to communicate with the kernel device-mapper.
- # Set to 0 if you want to use the tools to manipulate LVM metadata
- # without activating any logical volumes.
- # If the device-mapper kernel driver is not present in your kernel
- # setting this to 0 should suppress the error messages.
- activation = 1
-
- # If we can't communicate with device-mapper, should we try running
- # the LVM1 tools?
- # This option only applies to 2.4 kernels and is provided to help you
- # switch between device-mapper kernels and LVM1 kernels.
- # The LVM1 tools need to be installed with .lvm1 suffices
- # e.g. vgscan.lvm1 and they will stop working after you start using
- # the new lvm2 on-disk metadata format.
- # The default value is set when the tools are built.
- # fallback_to_lvm1 = 0
-
- # The default metadata format that commands should use - "lvm1" or "lvm2".
- # The command line override is -M1 or -M2.
- # Defaults to "lvm1" if compiled in, else "lvm2".
- format = "lvm1"
-
- # Location of proc filesystem
- proc = "/proc"
-
- # Type of locking to use. Defaults to file-based locking (1).
- # Turn locking off by setting to 0 (dangerous: risks metadata corruption
- # if LVM2 commands get run concurrently).
- locking_type = 1
-
- # Local non-LV directory that holds file-based locks while commands are
- # in progress. A directory like /tmp that may get wiped on reboot is OK.
- locking_dir = "/var/lock/lvm"
-
- # Other entries can go here to allow you to load shared libraries
- # e.g. if support for LVM1 metadata was compiled as a shared library use
- # format_libraries = "liblvm2format1.so"
- # Full pathnames can be given.
-
- # Search this directory first for shared libraries.
- # library_dir = "/lib"
-}
-
-activation {
- # Device used in place of missing stripes if activating incomplete volume.
- # For now, you need to set this up yourself first (e.g. with 'dmsetup')
- # For example, you could make it return I/O errors using the 'error'
- # target or make it return zeros.
- missing_stripe_filler = "/dev/ioerror"
-
- # Size (in KB) of each copy operation when mirroring
- mirror_region_size = 512
-
- # How much stack (in KB) to reserve for use while devices suspended
- reserved_stack = 256
-
- # How much memory (in KB) to reserve for use while devices suspended
- reserved_memory = 8192
-
- # Nice value used while devices suspended
- process_priority = -18
-
- # If volume_list is defined, each LV is only activated if there is a
- # match against the list.
- # "vgname" and "vgname/lvname" are matched exactly.
- # "@tag" matches any tag set in the LV or VG.
- # "@*" matches if any tag defined on the host is also set in the LV or VG
- #
- # volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
-}
-
-
-####################
-# Advanced section #
-####################
-
-# Metadata settings
-#
-# metadata {
- # Default number of copies of metadata to hold on each PV. 0, 1 or 2.
- # It's best to leave this at 2.
- # You might want to override it from the command line with 0 or 1
- # when running pvcreate on new PVs which are to be added to large VGs.
-
- # pvmetadatacopies = 2
-
- # Approximate default size of on-disk metadata areas in sectors.
- # You should increase this if you have large volume groups or
- # you want to retain a large on-disk history of your metadata changes.
-
- # pvmetadatasize = 255
-
- # List of directories holding live copies of text format metadata.
- # These directories must not be on logical volumes!
- # It's possible to use LVM2 with a couple of directories here,
- # preferably on different (non-LV) filesystems, and with no other
- # on-disk metadata (pvmetadatacopies = 0). Or this can be in
- # addition to on-disk metadata areas.
- # The feature was originally added to simplify testing and is not
- # supported under low memory situations - the machine could lock up.
- #
- # Never edit any files in these directories by hand unless you
- # you are absolutely sure you know what you are doing! Use
- # the supplied toolset to make changes (e.g. vgcfgrestore).
-
- # dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
-#}
-
-
git://git.onelab.eu / bootcd.git / commitdiff