source/BootManager.py

   1 #!/usr/bin/python2 -u
   2
   3 # Copyright (c) 2003 Intel Corporation
   4 # All rights reserved.
   5 #
   6 # Copyright (c) 2004-2006 The Trustees of Princeton University
   7 # All rights reserved.
   8
   9 import string
  10 import sys, os, traceback
  11 from time import gmtime, strftime
  12 from gzip import GzipFile
  13
  14 from steps import *
  15 from Exceptions import *
  16 import notify_messages
  17 import BootServerRequest
  18
  19 # all output is written to this file
  20 LOG_FILE= "/tmp/bm.log"
  21 UPLOAD_LOG_PATH = "/alpina-logs/upload.php"
  22
  23 # the new contents of PATH when the boot manager is running
  24 BIN_PATH= ('/usr/local/bin',
  25            '/usr/local/sbin',
  26            '/bin',
  27            '/sbin',
  28            '/usr/bin',
  29            '/usr/sbin',
  30            '/usr/local/planetlab/bin')
  31
  32
  33 # the set of valid node run states
  34 NodeRunStates = {}
  35
  36 class log:
  37
  38     def __init__( self, OutputFilePath= None ):
  39         if OutputFilePath:
  40             try:
  41                 self.OutputFilePath= OutputFilePath
  42                 self.OutputFile= GzipFile( OutputFilePath, "w", 9 )
  43             except:
  44                 print( "Unable to open output file for log, continuing" )
  45                 self.OutputFile= None
  46
  47
  48     def LogEntry( self, str, inc_newline= 1, display_screen= 1 ):
  49         if self.OutputFile:
  50             self.OutputFile.write( str )
  51         if display_screen:
  52             sys.stdout.write( str )
  53
  54         if inc_newline:
  55             if display_screen:
  56                 sys.stdout.write( "\n" )
  57             if self.OutputFile:
  58                 self.OutputFile.write( "\n" )
  59
  60         if self.OutputFile:
  61             self.OutputFile.flush()
  62
  63
  64
  65     def write( self, str ):
  66         """
  67         make log behave like a writable file object (for traceback
  68         prints)
  69         """
  70         self.LogEntry( str, 0, 1 )
  71
  72
  73
  74     def Upload( self ):
  75         """
  76         upload the contents of the log to the server
  77         """
  78
  79         if self.OutputFile is not None:
  80             self.LogEntry( "Uploading logs to %s" % UPLOAD_LOG_PATH )
  81
  82             self.OutputFile.close()
  83             self.OutputFile= None
  84
  85             bs_request = BootServerRequest.BootServerRequest()
  86             bs_request.MakeRequest(PartialPath = UPLOAD_LOG_PATH,
  87                                    GetVars = None, PostVars = None,
  88                                    FormData = ["log=@" + self.OutputFilePath],
  89                                    DoSSL = True, DoCertCheck = True)
  90
  91
  92
  93
  94
  95
  96 class BootManager:
  97
  98     # file containing initial variables/constants
  99     VARS_FILE = "configuration"
 100
 101
 102     def __init__(self, log, forceState):
 103         # override machine's current state from the command line
 104         self.forceState = forceState
 105
 106         # the main logging point
 107         self.LOG= log
 108
 109         # set to 1 if we can run after initialization
 110         self.CAN_RUN = 0
 111
 112         # read in and store all variables in VARS_FILE into each line
 113         # is in the format name=val (any whitespace around the = is
 114         # removed. everything after the = to the end of the line is
 115         # the value
 116         vars = {}
 117         vars_file= file(self.VARS_FILE,'r')
 118         validConfFile = True
 119         for line in vars_file:
 120             # if its a comment or a whitespace line, ignore
 121             if line[:1] == "#" or string.strip(line) == "":
 122                 continue
 123
 124             parts= string.split(line,"=")
 125             if len(parts) != 2:
 126                 self.LOG.LogEntry( "Invalid line in vars file: %s" % line )
 127                 validConfFile = False
 128                 break
 129
 130             name= string.strip(parts[0])
 131             value= string.strip(parts[1])
 132             vars[name]= value
 133
 134         vars_file.close()
 135         if not validConfFile:
 136             self.LOG.LogEntry( "Unable to read configuration vars." )
 137             return
 138
 139         # find out which directory we are running it, and set a variable
 140         # for that. future steps may need to get files out of the bootmanager
 141         # directory
 142         current_dir= os.getcwd()
 143         vars['BM_SOURCE_DIR']= current_dir
 144
 145         # not sure what the current PATH is set to, replace it with what
 146         # we know will work with all the boot cds
 147         os.environ['PATH']= string.join(BIN_PATH,":")
 148
 149         # this contains a set of information used and updated
 150         # by each step
 151         self.VARS= vars
 152
 153         self.CAN_RUN= 1
 154
 155     def Run(self):
 156         """
 157         core boot manager logic.
 158
 159         the way errors are handled is as such: if any particular step
 160         cannot continue or unexpectibly fails, an exception is thrown.
 161         in this case, the boot manager cannot continue running.
 162
 163         these step functions can also return a 0/1 depending on whether
 164         or not it succeeded. In the case of steps like ConfirmInstallWithUser,
 165         a 0 is returned and no exception is thrown if the user chose not
 166         to confirm the install. The same goes with the CheckHardwareRequirements.
 167         If requriements not met, but tests were succesfull, return 0.
 168
 169         for steps that run within the installer, they are expected to either
 170         complete succesfully and return 1, or throw an execption.
 171
 172         For exact return values and expected operations, see the comments
 173         at the top of each of the invididual step functions.
 174         """
 175
 176         def _nodeNotInstalled():
 177             # called by the _xxxState() functions below upon failure
 178             self.VARS['BOOT_STATE']= 'dbg'
 179             self.VARS['STATE_CHANGE_NOTIFY']= 1
 180             self.VARS['STATE_CHANGE_NOTIFY_MESSAGE']= \
 181                       notify_messages.MSG_NODE_NOT_INSTALLED
 182             raise BootManagerException, \
 183                   notify_messages.MSG_NODE_NOT_INSTALLED
 184
 185         def _bootRun():
 186             # implements the boot logic, which consists of first
 187             # double checking that the node was properly installed,
 188             # checking whether someone added or changed disks, and
 189             # then finally chain boots.
 190
 191             InstallInit.Run( self.VARS, self.LOG )
 192             if ValidateNodeInstall.Run( self.VARS, self.LOG ):
 193                 WriteModprobeConfig.Run( self.VARS, self.LOG )
 194                 MakeInitrd.Run( self.VARS, self.LOG )
 195                 WriteNetworkConfig.Run( self.VARS, self.LOG )
 196                 # the following step should be done by NM
 197                 UpdateNodeConfiguration.Run( self.VARS, self.LOG )
 198                 CheckForNewDisks.Run( self.VARS, self.LOG )
 199                 SendHardwareConfigToPLC.Run( self.VARS, self.LOG )
 200                 ChainBootNode.Run( self.VARS, self.LOG )
 201             else:
 202                 _nodeNotInstalled()
 203
 204         def _rinsRun():
 205             # implements the reinstall logic, which will check whether
 206             # the min. hardware requirements are met, install the
 207             # software, and upon correct installation will switch too
 208             # 'boot' state and chainboot into the production system
 209             if not CheckHardwareRequirements.Run( self.VARS, self.LOG ):
 210                 self.VARS['BOOT_STATE']= 'dbg'
 211                 raise BootManagerException, "Hardware requirements not met."
 212
 213             # runinstaller
 214             InstallInit.Run( self.VARS, self.LOG )
 215             InstallPartitionDisks.Run( self.VARS, self.LOG )
 216             InstallBootstrapRPM.Run( self.VARS, self.LOG )
 217             InstallWriteConfig.Run( self.VARS, self.LOG )
 218             InstallUninitHardware.Run( self.VARS, self.LOG )
 219             self.VARS['BOOT_STATE']= 'boot'
 220             self.VARS['STATE_CHANGE_NOTIFY']= 1
 221             self.VARS['STATE_CHANGE_NOTIFY_MESSAGE']= \
 222                  notify_messages.MSG_INSTALL_FINISHED
 223             UpdateBootStateWithPLC.Run( self.VARS, self.LOG )
 224             _bootRun()
 225
 226         def _newRun():
 227             # implements the new install logic, which will first check
 228             # with the user whether it is ok to install on this
 229             # machine, switch to 'rins' state and then invoke the rins
 230             # logic.  See rinsState logic comments for further
 231             # details.
 232             if not ConfirmInstallWithUser.Run( self.VARS, self.LOG ):
 233                 return 0
 234             self.VARS['BOOT_STATE']= 'rins'
 235             UpdateBootStateWithPLC.Run( self.VARS, self.LOG )
 236             _rinsRun()
 237
 238         def _debugRun():
 239             # implements debug logic, which just starts the sshd
 240             # and just waits around
 241             self.VARS['BOOT_STATE']='dbg'
 242             UpdateBootStateWithPLC.Run( self.VARS, self.LOG )
 243             StartDebug.Run( self.VARS, self.LOG )
 244
 245         def _badRun():
 246             # should never happen; log event
 247             self.LOG.write( "\nInvalid BOOT_STATE = %s\n" % self.VARS['BOOT_STATE'])
 248             _debugRun()
 249
 250         global NodeRunStates
 251         # setup state -> function hash table
 252         NodeRunStates['new']  = _newRun
 253         NodeRunStates['inst'] = _newRun
 254         NodeRunStates['rins'] = _rinsRun
 255         NodeRunStates['boot'] = _bootRun
 256         NodeRunStates['dbg']  = _debugRun
 257
 258         success = 0
 259         try:
 260             InitializeBootManager.Run( self.VARS, self.LOG )
 261             ReadNodeConfiguration.Run( self.VARS, self.LOG )
 262             AuthenticateWithPLC.Run( self.VARS, self.LOG )
 263             GetAndUpdateNodeDetails.Run( self.VARS, self.LOG )
 264
 265             # override machine's current state from the command line
 266             if self.forceState is not None:
 267                 self.VARS['BOOT_STATE']= self.forceState
 268                 UpdateBootStateWithPLC.Run( self.VARS, self.LOG )
 269
 270             stateRun = NodeRunStates.get(self.VARS['BOOT_STATE'],_badRun)
 271             stateRun()
 272             success = 1
 273
 274         except KeyError, e:
 275             self.LOG.write( "\n\nKeyError while running: %s\n" % str(e) )
 276         except BootManagerException, e:
 277             self.LOG.write( "\n\nException while running: %s\n" % str(e) )
 278         except:
 279             self.LOG.write( "\n\nImplementation Error\n")
 280             traceback.print_exc(file=self.LOG.OutputFile)
 281             traceback.print_exc()
 282
 283         if not success:
 284             try:
 285                 _debugRun()
 286             except BootManagerException, e:
 287                 self.LOG.write( "\n\nException while running: %s\n" % str(e) )
 288             except:
 289                 self.LOG.write( "\n\nImplementation Error\n")
 290                 traceback.print_exc(file=self.LOG.OutputFile)
 291                 traceback.print_exc()
 292
 293         return success
 294
 295
 296 def main(argv):
 297
 298     import utils
 299     utils.prompt_for_breakpoint_mode()
 300
 301     utils.breakpoint ("Entering BootManager::main")
 302
 303     global NodeRunStates
 304     NodeRunStates = {'new':None,
 305                      'inst':None,
 306                      'rins':None,
 307                      'boot':None,
 308                      'dbg':None}
 309
 310     # set to 1 if error occurred
 311     error= 0
 312
 313     # all output goes through this class so we can save it and post
 314     # the data back to PlanetLab central
 315     LOG= log( LOG_FILE )
 316
 317     LOG.LogEntry( "BootManager started at: %s" % \
 318                   strftime("%a, %d %b %Y %H:%M:%S +0000", gmtime()) )
 319
 320     try:
 321         forceState = None
 322         if len(argv) == 2:
 323             fState = argv[1]
 324             if NodeRunStates.has_key(fState):
 325                 forceState = fState
 326             else:
 327                 LOG.LogEntry("FATAL: cannot force node run state to=%s" % fState)
 328                 error = 1
 329     except:
 330         traceback.print_exc(file=LOG.OutputFile)
 331         traceback.print_exc()
 332
 333     if error:
 334         LOG.LogEntry( "BootManager finished at: %s" % \
 335                       strftime("%a, %d %b %Y %H:%M:%S +0000", gmtime()) )
 336         LOG.Upload()
 337         return error
 338
 339     try:
 340         bm= BootManager(LOG,forceState)
 341         if bm.CAN_RUN == 0:
 342             LOG.LogEntry( "Unable to initialize BootManager." )
 343         else:
 344             LOG.LogEntry( "Running version %s of BootManager." %
 345                           bm.VARS['VERSION'] )
 346             success= bm.Run()
 347             if success:
 348                 LOG.LogEntry( "\nDone!" );
 349             else:
 350                 LOG.LogEntry( "\nError occurred!" );
 351                 error = 1
 352     except:
 353         traceback.print_exc(file=LOG.OutputFile)
 354         traceback.print_exc()
 355
 356     LOG.LogEntry( "BootManager finished at: %s" % \
 357                   strftime("%a, %d %b %Y %H:%M:%S +0000", gmtime()) )
 358     LOG.Upload()
 359
 360     return error
 361
 362
 363 if __name__ == "__main__":
 364     error = main(sys.argv)
 365     sys.exit(error)