--- /dev/null
+#!/bin/bash
+
+# NOTE on lxcsu
+# this tool derives from the PL code, from the lxc-userspace module
+# can be obtained through rpm/yum
+# it is used here as a replacement for 'vserver <> exec'
+# that is used throughout this code
+
+COMMANDPATH=$0
+COMMAND=$(basename $0)
+
+# default values, tunable with command-line options
+DEFAULT_FCDISTRO=f20
+DEFAULT_PLDISTRO=planetlab
+DEFAULT_PERSONALITY=linux64
+DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
+DEFAULT_BUILD_SCM_URL="git://git.onelab.eu/build"
+DEFAULT_IFNAME=eth0
+
+# default gpg path used in signing yum repo
+DEFAULT_GPGPATH="/etc/planetlab"
+# default email to use in gpg secring
+DEFAULT_GPGUID="root@$( /bin/hostname )"
+
+DEFAULT_TESTCONFIG="default"
+# for passing args to run_log
+RUN_LOG_EXTRAS=""
+
+# for publishing results, and the tests settings
+x=$(hostname)
+y=$(hostname|sed -e s,inria,,)
+# INRIA defaults
+if [ "$x" != "$y" ] ; then
+ DEFAULT_WEBPATH="/build/@PLDISTRO@/"
+ DEFAULT_TESTBUILDURL="http://build.onelab.eu/"
+ # this is where the buildurl is pointing towards
+ DEFAULT_WEBROOT="/build/"
+ DEFAULT_TESTMASTER="testmaster.onelab.eu"
+else
+ DEFAULT_WEBPATH="/build/@FCDISTRO@/@PLDISTRO@/"
+ DEFAULT_TESTBUILDURL="http://build.planet-lab.org/"
+ # this is where the buildurl is pointing towards
+ DEFAULT_WEBROOT="/build/"
+ DEFAULT_TESTMASTER="manager.test.planet-lab.org"
+fi
+
+####################
+# assuming vm runs in UTC
+DATE=$(date +'%Y.%m.%d')
+
+# still using /vservers for legacy reasons
+# as far as the build & test infra, we could adopt a new name
+# but the PL code still uses this name for now, so let's keep it simple
+function rootdir () {
+ slice=$1; shift
+ echo /vservers/$1/rootfs
+}
+
+# wrap a quick summary of suspicious stuff
+# this is to focus on installation that go wrong
+# use with care, a *lot* of other things can go bad as well
+function summary () {
+ from=$1; shift
+ echo "******************** BEG SUMMARY"
+ python - $from <<EOF
+#!/usr/bin/env python
+# read a full log and tries to extract the interesting stuff
+
+import sys,re
+m_show_line=re.compile(".* (BEG|END) (RPM|LXC).*|.*'boot'.*|\* .*| \* .*|.*is not installed.*|.*PROPFIND.*|.* (BEG|END).*:run_log.*|.* Within LXC (BEG|END) .*|.* MAIN (BEG|END).*")
+m_installing_any=re.compile('\r (Installing:[^\]]*]) ')
+m_installing_err=re.compile('\r (Installing:[^\]]*])(..+)')
+m_installing_end=re.compile('Installed:.*')
+m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
+m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
+
+def summary (filename):
+
+ try:
+ if filename=="-":
+ filename="stdin"
+ f=sys.stdin
+ else:
+ f=open(filename)
+ echo=False
+ for line in f.xreadlines():
+ # first off : discard warnings related to doc
+ if m_installing_doc1.match(line):
+ (begin,end)=m_installing_doc1.match(line).groups()
+ line=begin+end
+ if m_installing_doc2.match(line):
+ (begin,end)=m_installing_doc2.match(line).groups()
+ line=begin+end
+ # unconditionnally show these lines
+ if m_show_line.match(line):
+ print '>>>',line,
+ # an 'installing' line with messages afterwards : needs to be echoed
+ elif m_installing_err.match(line):
+ (installing,error)=m_installing_err.match(line).groups()
+ print '>>>',installing
+ print '>>>',error
+ echo=True
+ # closing an 'installing' section
+ elif m_installing_end.match(line):
+ echo=False
+ # any 'installing' line
+ elif m_installing_any.match(line):
+ if echo:
+ installing=m_installing_any.match(line).group(1)
+ print '>>>',installing
+ echo=False
+ # print lines when echo is true
+ else:
+ if echo: print '>>>',line,
+ f.close()
+ except:
+ print 'Failed to analyze',filename
+
+for arg in sys.argv[1:]:
+ summary(arg)
+EOF
+ echo "******************** END SUMMARY"
+}
+
+### we might build on a box other than the actual web server
+# utilities for handling the pushed material (rpms, logfiles, ...)
+function webpublish_misses_dir () { ssh root@${WEBHOST} "bash -c \"test \! -d $1\"" ; }
+function webpublish () { ssh root@${WEBHOST} "$@" ; }
+function webpublish_cp_local_to_remote () { scp $1 root@${WEBHOST}:$2 ; }
+function webpublish_cp_stdin_to_file () { ssh root@${WEBHOST} cat \> $1; }
+function webpublish_append_stdin_to_file () { ssh root@${WEBHOST} cat \>\> $1; }
+# provide remote dir as first argument, so any number of local files can be passed next
+function webpublish_rsync_dir () { rsync --archive --delete $VERBOSE $2 root@${WEBHOST}:$1 ; }
+function webpublish_rsync_files () {
+ remote="$1"; shift
+ rsync --archive $VERBOSE "$@" root@${WEBHOST}:"$remote" ;
+}
+
+# Notify recipient of failure or success, manage various stamps
+function failure() {
+ set -x
+ # early stage ? - let's not create /build/@PLDISTRO@
+ if test -z "$WEBLOG" ; then
+ WEBHOST=$(hostname)
+ WEBPATH=/tmp
+ WEBBASE=/tmp/vbuild-early-$(date +%Y-%m-%d)
+ WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
+ fi
+ webpublish mkdir -p $WEBBASE ||:
+ webpublish_cp_local_to_remote $LOG $WEBLOG ||:
+ summary $LOG | webpublish_append_stdin_to_file $WEBLOG ||:
+ (echo -n "============================== $COMMAND: failure at " ; date ; \
+ webpublish tail --lines=1000 $WEBLOG) | \
+ webpublish_cp_stdin_to_file $WEBBASE.ko ||:
+ if [ -n "$MAILTO" ] ; then
+ ( \
+ echo "Subject: KO ${BASE} ${MAIL_SUBJECT}" ; \
+ echo "To: $MAILTO" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
+ echo "........................................" ; \
+ webpublish tail --lines=1000 $WEBLOG ) | \
+ sendmail $MAILTO
+ fi
+ exit 1
+}
+
+function success () {
+ set -x
+ # early stage ? - let's not create /build/@PLDISTRO@
+ if test -z "$WEBLOG" ; then
+ WEBHOST=$(hostname)
+ WEBPATH=/tmp
+ WEBLOG=/tmp/vbuild-early-$(date +%Y-%m-%d).log.txt
+ fi
+ webpublish mkdir -p $WEBBASE
+ webpublish_cp_local_to_remote $LOG $WEBLOG
+ summary $LOG | webpublish_append_stdin_to_file $WEBLOG
+ if [ -n "$DO_TEST" ] ; then
+ short_message="PASS"
+ ( \
+ echo "Successfully built and tested" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ echo "and complete test logs at $WEBBASE_URL/testlogs" ; \
+ ) | webpublish_cp_stdin_to_file $WEBBASE.pass
+ webpublish rm -f $WEBBASE.pkg-ok $WEBBASE.ko
+ else
+ short_message="PKGOK"
+ ( \
+ echo "Successful package-only build, no test requested" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ ) | webpublish_cp_stdin_to_file $WEBBASE.pkg-ok
+ webpublish rm -f $WEBBASE.ko
+ fi
+ if [ -n "$MAILTO" ] ; then
+ ( \
+ echo "Subject: $short_message ${BASE} ${MAIL_SUBJECT}" ; \
+ echo "To: $MAILTO" ; \
+ echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ; \
+ echo "see build results at $WEBBASE_URL" ; \
+ echo "including full build log at $WEBBASE_URL/log.txt" ; \
+ [ -n "$DO_TEST" ] && echo "and complete test logs at $WEBBASE_URL/testlogs" ) \
+ | sendmail $MAILTO
+ fi
+ # XXX For some reason, we haven't been getting this email for successful builds. If this sleep
+ # doesn't fix the problem, I'll remove it -- Sapan.
+ sleep 5
+ exit 0
+}
+
+# run in the vm - do not manage success/failure, will be done from the root ctx
+function build () {
+ set -x
+ set -e
+
+ echo -n "============================== Starting $COMMAND:build on "
+ date
+
+ cd /build
+ show_env
+
+ echo "Running make IN $(pwd)"
+
+ # stuff our own variable settings
+ MAKEVARS=("build-GITPATH=${BUILD_SCM_URL}" "${MAKEVARS[@]}")
+ MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
+ MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
+ MAKEVARS=("PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
+ MAKEVARS=("MAILTO=${MAILTO}" "${MAKEVARS[@]}")
+ MAKEVARS=("WEBPATH=${WEBPATH}" "${MAKEVARS[@]}")
+ MAKEVARS=("TESTBUILDURL=${TESTBUILDURL}" "${MAKEVARS[@]}")
+ MAKEVARS=("WEBROOT=${WEBROOT}" "${MAKEVARS[@]}")
+
+ MAKEVARS=("BASE=${BASE}" "${MAKEVARS[@]}")
+
+ # initialize latex
+ /build/latex-first-run.sh || :
+
+ # stage1
+ make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true
+ # versions
+ make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
+ # actual stuff
+ make -C /build $DRY_RUN "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
+
+}
+
+# this was formerly run in the myplc-devel chroot but now is run in the root context,
+# this is so that the .ssh config gets done manually, and once and for all
+function run_log () {
+ set -x
+ set -e
+ trap failure ERR INT
+
+ echo "============================== BEG $COMMAND:run_log on $(date)"
+
+ ### the URL to the RPMS/<arch> location
+ # f12 now has everything in i686; try i386 first as older fedoras have both
+ url=""
+ for a in i386 i686 x86_64; do
+ archdir=$(rootdir $BASE)/build/RPMS/$a
+ if [ -d $archdir ] ; then
+ # where was that installed
+ url=$(echo $archdir | sed -e "s,$(rootdir $BASE)/build,${WEBPATH}/${BASE},")
+ url=$(echo $url | sed -e "s,${WEBROOT},${TESTBUILDURL},")
+ break
+ fi
+ done
+
+ if [ -z "$url" ] ; then
+ echo "$COMMAND: Cannot locate arch URL for testing"
+ failure
+ exit 1
+ fi
+
+ testmaster_ssh="root@${TESTMASTER}"
+
+ # test directory name on test box
+ testdir=${BASE}
+
+ # clean it
+ ssh -n ${testmaster_ssh} rm -rf ${testdir} ${testdir}.git
+
+ # check it out in the build
+ lxcsu -ro $BASE make -C /build tests-module
+
+ # push it onto the testmaster - just the 'system' subdir is enough
+ rsync --verbose --archive $(rootdir $BASE)/build/MODULES/tests/system/ ${testmaster_ssh}:${BASE}
+ # toss the build in the bargain, so the tests don't need to mess with extracting it
+ rsync --verbose --archive $(rootdir $BASE)/build/MODULES/build ${testmaster_ssh}:${BASE}/
+
+ # invoke test on testbox - pass url and build url - so the tests can use vtest-init-lxc.sh
+ run_log_env="-p $PERSONALITY -d $PLDISTRO -f $FCDISTRO"
+
+ # need to proceed despite of set -e
+ success=true
+ # passing the build_scm_url should not be needed anymore
+ ssh 2>&1 -n ${testmaster_ssh} ${testdir}/run_log --build ${BUILD_SCM_URL} --url ${url} $run_log_env $RUN_LOG_EXTRAS $VERBOSE --all || success=
+
+ # gather logs in the build vm
+ mkdir -p $(rootdir $BASE)/build/testlogs
+ rsync --verbose --archive ${testmaster_ssh}:$BASE/logs/ $(rootdir $BASE)/build/testlogs
+ # push them to the build web
+ chmod -R a+r $(rootdir $BASE)/build/testlogs/
+ webpublish_rsync_dir $WEBPATH/$BASE/testlogs/ $(rootdir $BASE)/build/testlogs/
+
+ echo "============================== END $COMMAND:run_log on $(date)"
+
+ if [ -z "$success" ] ; then
+ echo "Tests have failed - bailing out"
+ failure
+ fi
+
+}
+
+function in_root_context () {
+ rpm -q libvirt > /dev/null
+}
+
+# this part won't work if WEBHOST does not match the local host
+# would need to be made webpublish_* compliant
+# but do we really need this feature anyway ?
+function sign_node_packages () {
+
+ echo "Signing node packages"
+
+ need_createrepo=""
+
+ repository=$WEBPATH/$BASE/RPMS/
+ # the rpms that need signing
+ new_rpms=
+ # and the corresponding stamps
+ new_stamps=
+
+ for package in $(find $repository/ -name '*.rpm') ; do
+ stamp=$repository/signed-stamps/$(basename $package).signed
+ # If package is newer than signature stamp
+ if [ $package -nt $stamp ] ; then
+ new_rpms="$new_rpms $package"
+ new_stamps="$new_stamps $stamp"
+ fi
+ # Or than createrepo database
+ [ $package -nt $repository/repodata/repomd.xml ] && need_createrepo=true
+ done
+
+ if [ -n "$new_rpms" ] ; then
+ # Create a stamp once the package gets signed
+ mkdir $repository/signed-stamps 2> /dev/null
+
+ # Sign RPMS. setsid detaches rpm from the terminal,
+ # allowing the (hopefully blank) GPG password to be
+ # entered from stdin instead of /dev/tty.
+ echo | setsid rpm \
+ --define "_signature gpg" \
+ --define "_gpg_path $GPGPATH" \
+ --define "_gpg_name $GPGUID" \
+ --resign $new_rpms && touch $new_stamps
+ fi
+
+ # Update repository index / yum metadata.
+ if [ -n "$need_createrepo" ] ; then
+ echo "Indexing node packages after signing"
+ if [ -f $repository/yumgroups.xml ] ; then
+ createrepo --quiet -g yumgroups.xml $repository
+ else
+ createrepo --quiet $repository
+ fi
+ fi
+}
+
+function show_env () {
+ set +x
+ echo FCDISTRO=$FCDISTRO
+ echo PLDISTRO=$PLDISTRO
+ echo PERSONALITY=$PERSONALITY
+ echo BASE=$BASE
+ echo BUILD_SCM_URL=$BUILD_SCM_URL
+ echo MAKEVARS="${MAKEVARS[@]}"
+ echo DRY_RUN="$DRY_RUN"
+ echo PLDISTROTAGS="$PLDISTROTAGS"
+ # this does not help, it's not yet set when we run show_env
+ #echo WEBPATH="$WEBPATH"
+ echo TESTBUILDURL="$TESTBUILDURL"
+ echo WEBHOST="$WEBHOST"
+ if in_root_context ; then
+ echo PLDISTROTAGS="$PLDISTROTAGS"
+ else
+ if [ -f /build/$PLDISTROTAGS ] ; then
+ echo "XXXXXXXXXXXXXXXXXXXX Contents of tags definition file /build/$PLDISTROTAGS"
+ cat /build/$PLDISTROTAGS
+ echo "XXXXXXXXXXXXXXXXXXXX end tags definition"
+ else
+ echo "XXXXXXXXXXXXXXXXXXXX Cannot find tags definition file /build/$PLDISTROTAGS, assuming remote pldistro"
+ fi
+ fi
+ set -x
+}
+
+function setupssh () {
+ base=$1; shift
+ sshkey=$1; shift
+
+ if [ -f ${sshkey} ] ; then
+ SSHDIR=$(rootdir ${base})/root/.ssh
+ mkdir -p ${SSHDIR}
+ cp $sshkey ${SSHDIR}/thekey
+ (echo "host *"; \
+ echo " IdentityFile ~/.ssh/thekey"; \
+ echo " StrictHostKeyChecking no" ) > ${SSHDIR}/config
+ chmod 700 ${SSHDIR}
+ chmod 400 ${SSHDIR}/*
+ else
+ echo "WARNING : could not find provided ssh key $sshkey - ignored"
+ fi
+}
+
+function usage () {
+ echo "Usage: $COMMAND [option] [var=value...] make-targets"
+ echo "Supported options"
+ echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
+ echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
+ echo " -p personality - defaults to $DEFAULT_PERSONALITY"
+ echo " -m mailto - no default"
+ echo " -s build_scm_url - git URL where to fetch the build module - defaults to $DEFAULT_BUILD_SCM_URL"
+ echo " define GIT tag or branch name appending @tagname to url"
+ echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
+ echo " -b base - defaults to $DEFAULT_BASE"
+ echo " @NAME@ replaced as appropriate"
+ echo " -o base: (overwrite) do not re-create vm, re-use base instead"
+ echo " the -f/-d/-p/-m/-s/-t options are uneffective in this case"
+ echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
+ echo " -y {pl,pg} - passed to run_log"
+ echo " -e step - passed to run_log"
+ echo " -X : passes --lxc to run_log"
+ echo " -S : passes --vs to run_log"
+ echo " -x <run_log_args> - a hook to pass other arguments to run_log"
+ echo " -w webpath - defaults to $DEFAULT_WEBPATH"
+ echo " -W testbuildurl - defaults to $DEFAULT_TESTBUILDURL; this is also used to get the hostname where to publish builds"
+ echo " -r webroot - defaults to $DEFAULT_WEBROOT - the fs point where testbuildurl actually sits"
+ echo " -M testmaster - defaults to $DEFAULT_TESTMASTER"
+ echo " -Y - sign yum repo in webpath"
+ echo " -g gpg_path - to the gpg secring used to sign rpms. Defaults to $DEFAULT_GPGPATH"
+ echo " -u gpg_uid - email used in secring. Defaults to $DEFAULT_GPGUID"
+ echo " -K sshkey - specify ssh key to use when reaching git over ssh"
+ echo " -S - do not publish source rpms"
+ echo " -B - run build only"
+ echo " -T - run test only"
+ echo " -n - dry-run: -n passed to make - vm gets created though - no mail sent"
+ echo " -v - be verbose"
+ echo " -7 - uses weekday-@FCDISTRO@ as base"
+ echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
+ echo " --build-branch branch - build using the branch from build module"
+ exit 1
+}
+
+function main () {
+
+ set -e
+
+ # parse arguments
+ MAKEVARS=()
+ MAKETARGETS=()
+ DRY_RUN=
+ DO_BUILD=true
+ DO_TEST=true
+ PUBLISH_SRPMS=true
+ SSH_KEY=""
+ SIGNYUMREPO=""
+
+ OPTS_ORIG=$@
+ OPTS=$(getopt -o "f:d:p:m:s:t:b:o:c:y:e:XSx:w:W:r:M:Yg:u:K:SBTnv7i:P:h" -l "build-branch:" -- $@)
+ if [ $? != 0 ]
+ then
+ usage
+ fi
+ eval set -- "$OPTS"
+ while true; do
+ case $1 in
+ -f) FCDISTRO=$2; shift 2 ;;
+ -d) PLDISTRO=$2; shift 2 ;;
+ -p) PERSONALITY=$2; shift 2 ;;
+ -m) MAILTO=$2; shift 2 ;;
+ -s) BUILD_SCM_URL=$2; shift 2 ;;
+ -t) PLDISTROTAGS=$2; shift 2 ;;
+ -b) BASE=$2; shift 2 ;;
+ -o) OVERBASE=$2; shift 2 ;;
+ -c) TESTCONFIG="$TESTCONFIG $2"; shift 2 ;;
+ ########## passing stuff to run_log
+ # -y foo -> run_log -y foo
+ -y) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --rspec-style $2"; shift 2 ;;
+ # -e foo -> run_log -e foo
+ -e) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --exclude $2"; shift 2 ;;
+ # -X -> run_log --lxc
+ -X) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --lxc"; shift;;
+ # -S -> run_log --vs
+ -S) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --vs"; shift;;
+ # more general form to pass args to run_log
+ # -x foo -> run_log foo
+ -x) RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS $2"; shift 2;;
+ ##########
+ -w) WEBPATH=$2; shift 2 ;;
+ -W) TESTBUILDURL=$2; shift 2 ;;
+ -r) WEBROOT=$2; shift 2 ;;
+ -M) TESTMASTER=$2; shift 2 ;;
+ -Y) SIGNYUMREPO=true; shift ;;
+ -g) GPGPATH=$2; shift 2 ;;
+ -u) GPGUID=$2; shift 2 ;;
+ -K) SSH_KEY=$2; shift 2 ;;
+ -S) PUBLISH_SRPMS="" ; shift ;;
+ -B) DO_TEST= ; shift ;;
+ -T) DO_BUILD= ; shift;;
+ -n) DRY_RUN="-n" ; shift ;;
+ -v) set -x ; VERBOSE="-v" ; shift ;;
+ -7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ; shift ;;
+ -i) IFNAME=$2; shift 2 ;;
+ -P) PREINSTALLED="-P $2"; shift 2;;
+ -h) usage ; shift ;;
+ --) shift; break ;;
+ esac
+ done
+
+ # preserve options for passing them again later, together with expanded base
+ options=$OPTS_ORIG
+
+ # allow var=value stuff;
+ for target in "$@" ; do
+ # check if contains '='
+ target1=$(echo $target | sed -e s,=,,)
+ if [ "$target" = "$target1" ] ; then
+ MAKETARGETS=(${MAKETARGETS[@]} "$target")
+ else
+ MAKEVARS=(${MAKEVARS[@]} "$target")
+ fi
+ done
+
+ # set defaults
+ [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
+ [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
+ [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
+ [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
+ [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
+ [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
+ [ -z "$TESTBUILDURL" ] && TESTBUILDURL="$DEFAULT_TESTBUILDURL"
+ [ -z "$WEBROOT" ] && WEBROOT="$DEFAULT_WEBROOT"
+ [ -z "$GPGPATH" ] && GPGPATH="$DEFAULT_GPGPATH"
+ [ -z "$GPGUID" ] && GPGUID="$DEFAULT_GPGUID"
+ [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
+ [ -z "$BUILD_SCM_URL" ] && BUILD_SCM_URL="$DEFAULT_BUILD_SCM_URL"
+ [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
+ [ -z "$TESTMASTER" ] && TESTMASTER="$DEFAULT_TESTMASTER"
+
+ [ -n "$DRY_RUN" ] && MAILTO=""
+
+ # elaborate the extra args to be passed to run_log
+ for config in ${TESTCONFIG} ; do
+ RUN_LOG_EXTRAS="$RUN_LOG_EXTRAS --config $config"
+ done
+
+
+ if [ -n "$OVERBASE" ] ; then
+ sedargs="-e s,@DATE@,${DATE},g"
+ BASE=$(echo ${OVERBASE} | sed $sedargs)
+ else
+ sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
+ BASE=$(echo ${BASE} | sed $sedargs)
+ fi
+
+ ### elaborate mail subject
+ if [ -n "$DO_BUILD" -a -n "$DO_TEST" ] ; then
+ MAIL_SUBJECT="full"
+ elif [ -n "$DO_BUILD" ] ; then
+ MAIL_SUBJECT="pkg-only"
+ elif [ -n "$DO_TEST" ] ; then
+ MAIL_SUBJECT="test-only"
+ fi
+ if [ -n "$OVERBASE" ] ; then
+ MAIL_SUBJECT="${MAIL_SUBJECT} rerun"
+ else
+ MAIL_SUBJECT="${MAIL_SUBJECT} fresh"
+ fi
+ short_hostname=$(hostname | cut -d. -f1)
+ MAIL_SUBJECT="on ${short_hostname} - ${MAIL_SUBJECT}"
+
+ ### compute WEBHOST from TESTBUILDURL
+ # this is to avoid having to change the builds configs everywhere
+ # simplistic way to extract hostname from a URL
+ WEBHOST=$(echo "$TESTBUILDURL" | cut -d/ -f 3)
+
+ if ! in_root_context ; then
+ # in the vm
+ echo "==================== Within LXC BEG $(date)"
+ build
+ echo "==================== Within LXC END $(date)"
+
+ else
+ trap failure ERR INT
+ # we run in the root context :
+ # (*) create or check for the vm to use
+ # (*) copy this command in the vm
+ # (*) invoke it
+
+ if [ -n "$OVERBASE" ] ; then
+ ### Re-use a vm (finish an unfinished build..)
+ if [ ! -d $(rootdir ${BASE}) ] ; then
+ echo $COMMAND : cannot find vm $BASE
+ exit 1
+ fi
+ # manage LOG - beware it might be a symlink so nuke it first
+ LOG=$(rootdir ${BASE}).log.txt
+ rm -f $LOG
+ exec > $LOG 2>&1
+ set -x
+ echo "XXXXXXXXXX $COMMAND: using existing vm $BASE" $(date)
+ # start in case e.g. we just rebooted
+ virsh --connect lxc:/// start ${BASE} || :
+ # retrieve environment from the previous run
+ FCDISTRO=$(lxcsu -ro ${BASE} /build/getdistroname.sh)
+ BUILD_SCM_URL=$(lxcsu -ro ${BASE} make --no-print-directory -C /build stage1=skip +build-GITPATH)
+ # for efficiency, crop everything in one make run
+ tmp=/tmp/${BASE}-env.sh
+ lxcsu -ro ${BASE} make --no-print-directory -C /build stage1=skip \
+ ++PLDISTRO ++PLDISTROTAGS ++PERSONALITY ++MAILTO ++WEBPATH ++TESTBUILDURL ++WEBROOT > $tmp
+ . $tmp
+ rm -f $tmp
+ # update build
+ [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
+ lxcsu -ro $BASE bash -c "cd /build; git pull; make tests-clean"
+ # make sure we refresh the tests place in case it has changed
+ rm -f /build/MODULES/tests
+ options=(${options[@]} -d $PLDISTRO -t $PLDISTROTAGS -s $BUILD_SCM_URL)
+ [ -n "$PERSONALITY" ] && options=(${options[@]} -p $PERSONALITY)
+ [ -n "$MAILTO" ] && options=(${options[@]} -m $MAILTO)
+ [ -n "$WEBPATH" ] && options=(${options[@]} -w $WEBPATH)
+ [ -n "$TESTBUILDURL" ] && options=(${options[@]} -W $TESTBUILDURL)
+ [ -n "$WEBROOT" ] && options=(${options[@]} -r $WEBROOT)
+ show_env
+ else
+ # create vm: check it does not exist yet
+ i=
+ while [ -d $(rootdir ${BASE})${i} ] ; do
+ # we name subsequent builds <base>-n<i> so the logs and builds get sorted properly
+ [ -z ${i} ] && BASE=${BASE}-n
+ i=$((${i}+1))
+ if [ $i -gt 100 ] ; then
+ echo "$COMMAND: Failed to create build vm $(rootdir ${BASE})${i}"
+ exit 1
+ fi
+ done
+ BASE=${BASE}${i}
+ # need update
+ # manage LOG - beware it might be a symlink so nuke it first
+ LOG=$(rootdir ${BASE}).log.txt
+ rm -f $LOG
+ exec > $LOG 2>&1
+ set -x
+ echo "XXXXXXXXXX $COMMAND: creating vm $BASE" $(date)
+ show_env
+
+ ### extract the whole build - much simpler
+ tmpdir=/tmp/$COMMAND-$$
+ GIT_REPO=$(echo $BUILD_SCM_URL | cut -d@ -f1)
+ GIT_TAG=$(echo $BUILD_SCM_URL | cut -s -d@ -f2)
+ GIT_TAG=${GIT_TAG:-master}
+ mkdir -p $tmpdir; git archive --remote=$GIT_REPO $GIT_TAG | tar -C $tmpdir -xf -
+
+ # Create lxc vm
+ cd $tmpdir
+ ./vbuild-init-lxc.sh $VERBOSE -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${PREINSTALLED} ${BASE}
+ # cleanup
+ cd -
+ rm -rf $tmpdir
+ # Extract build again - in the vm
+ [ -n "$SSH_KEY" ] && setupssh ${BASE} ${SSH_KEY}
+ lxcsu -ro $BASE bash -c "git clone $GIT_REPO /build; cd /build; git checkout $GIT_TAG"
+ fi
+ echo "XXXXXXXXXX $COMMAND: preparation of vm $BASE done" $(date)
+
+ # The log inside the vm contains everything
+ LOG2=$(rootdir ${BASE})/log.txt
+ (echo "==================== BEG LXC Transcript of vm creation" ; \
+ cat $LOG ; \
+ echo "==================== END LXC Transcript of vm creation" ; \
+ echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
+ ### not too nice : nuke the former log, symlink it to the new one
+ rm $LOG; ln -s $LOG2 $LOG
+ LOG=$LOG2
+ # redirect log again
+ exec >> $LOG 2>&1
+
+ sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
+ WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
+ webpublish mkdir -p ${WEBPATH}
+
+ # where to store the log for web access
+ WEBBASE=${WEBPATH}/${BASE}
+ WEBLOG=${WEBPATH}/${BASE}/log.txt
+ # compute the log URL - inserted in the mail messages for convenience
+ WEBBASE_URL=$(echo $WEBBASE | sed -e "s,//,/,g" -e "s,${WEBROOT},${TESTBUILDURL},")
+
+ if [ -n "$DO_BUILD" ] ; then
+
+ # invoke this command into the build directory of the vm
+ cp $COMMANDPATH $(rootdir ${BASE})/build/
+
+ # invoke this command in the vm for building (-T)
+ lxcsu -ro ${BASE} chmod +x /build/$COMMAND
+ lxcsu -ro ${BASE} /build/$COMMAND "${options[@]}" -b "${BASE}" "${MAKEVARS[@]}" "${MAKETARGETS[@]}"
+ fi
+
+ # publish to the web so run_log can find them
+ set +e
+ webpublish rm -rf $WEBPATH/$BASE
+ # guess if we've been doing any debian-related build
+ if [ ! -f $(rootdir $BASE)/etc/debian_version ] ; then
+ webpublish mkdir -p $WEBPATH/$BASE/{RPMS,SRPMS}
+ webpublish_rsync_dir $WEBPATH/$BASE/RPMS/ $(rootdir $BASE)/build/RPMS/
+ [[ -n "$PUBLISH_SRPMS" ]] && webpublish_rsync_dir $WEBPATH/$BASE/SRPMS/ $(rootdir $BASE)/build/SRPMS/
+ else
+ # run scanpackages so we can use apt-get on this
+ # (not needed on fedora b/c this is done by the regular build already)
+ lxcsu -ro $BASE bash -c "(cd /build ; dpkg-scanpackages DEBIAN/ | gzip -9c > Packages.gz)"
+ webpublish mkdir -p $WEBPATH/$BASE/DEBIAN
+ webpublish_rsync_files $WEBPATH/$BASE/DEBIAN/ $(rootdir $BASE)/build/DEBIAN/*.deb
+ webpublish_rsync_files $WEBPATH/$BASE/ $(rootdir $BASE)/build/Packages.gz
+ fi
+ # publish myplc-release if this exists
+ release=$(rootdir $BASE)/build/myplc-release
+ [ -f $release ] && webpublish_rsync_files $WEBPATH/$BASE $release
+ set -e
+
+ # create yum repo and sign packages.
+ if [ -n "$SIGNYUMREPO" ] ; then
+ # this script does not yet support signing on a remote (webhost) repo
+ sign_here=$(hostname) ; sign_web=$(webpublish hostname)
+ if [ "$hostname" = "$sign_here" ] ; then
+ sign_node_packages
+ else
+ echo "$COMMAND does not support signing on a remote yum repo"
+ echo "you might want to turn off the -y option, or run this on the web server box itself"
+ exit 1
+ fi
+ fi
+
+ if [ -n "$DO_TEST" ] ; then
+ run_log
+ fi
+
+ success
+
+ echo "==================== MAIN END $(date)"
+ fi
+
+}
+
+##########
+main "$@"