+++ /dev/null
-# CHANGES
-# -------
-# v0.3a2- fixed bug in "if" operator. Thanks kad@dgtu.donetsk.ua.
-# v0.3a- added TIME parameter. Example:
-# TIME=00:00-19:00;64Kbit/6Kbit
-# So, between 00:00 and 19:00 RATE will be 64Kbit.
-# Just start "cbq.init timecheck" periodically from cron (every 10
-# minutes for example).
-# !!! Anyway you MUST start "cbq.init start" for CBQ initialize.
-# v0.2 - Some cosmetique changes. Now it more compatible with
-# old bash version. Thanks to Stanislav V. Voronyi
-# <stas@cnti.uanet.kharkov.ua>.
-# v0.1 - First public release
-#
-# README
-# ------
-#
-# First of all - this is just a SIMPLE EXAMPLE of CBQ power.
-# Don't ask me "why" and "how" :)
-#
-# This is an example of using CBQ (Class Based Queueing) and policy-based
-# filter for building smart ethernet shapers. All CBQ parameters are
-# correct only for ETHERNET (eth0,1,2..) linux interfaces. It works for
-# ARCNET too (just set bandwidth parameter to 2Mbit). It was tested
-# on 2.1.125-2.1.129 linux kernels (KSI linux, Nostromo version) and
-# ip-route utility by A.Kuznetsov (iproute2-ss981101 version).
-# You can download ip-route from ftp://ftp.inr.ac.ru/ip-routing or
-# get iproute2*.rpm (compiled with glibc) from ftp.ksi-linux.com.
-#
-#
-# HOW IT WORKS
-#
-# Each shaper must be described by config file in $CBQ_PATH
-# (/etc/sysconfig/cbq/) directory - one config file for each CBQ shaper.
-#
-# Some words about config file name:
-# Each shaper has its personal ID - two byte HEX number. Really ID is
-# CBQ class.
-# So, filename looks like:
-#
-# cbq-1280.My_first_shaper
-# ^^^ ^^^ ^^^^^^^^^^^^^
-# | | |______ Shaper name - any word
-# | |___________________ ID (0000-FFFF), let ID looks like shaper's rate
-# |______________________ Filename must begin from "cbq-"
-#
-#
-# Config file describes shaper parameters and source[destination]
-# address[port].
-# For example let's prepare /etc/sysconfig/cbq/cbq-1280.My_first_shaper:
-#
-# ----------8<---------------------
-# DEVICE=eth0,10Mbit,1Mbit
-# RATE=128Kbit
-# WEIGHT=10Kbit
-# PRIO=5
-# RULE=192.168.1.0/24
-# ----------8<---------------------
-#
-# This is minimal configuration, where:
-# DEVICE: eth0 - device where we do control our traffic
-# 10Mbit - REAL ethernet card bandwidth
-# 1Mbit - "weight" of :1 class (parent for all shapers for eth0),
-# as a rule of thumb weight=batdwidth/10.
-# 100Mbit adapter's example: DEVICE=eth0,100Mbit,10Mbit
-# *** If you want to build more than one shaper per device it's
-# enough to describe bandwidth and weight once - cbq.init
-# is smart :) You can put only 'DEVICE=eth0' into cbq-*
-# config file for eth0.
-#
-# RATE: Shaper's speed - Kbit,Mbit or bps (bytes per second)
-#
-# WEIGHT: "weight" of shaper (CBQ class). Like for DEVICE - approx. RATE/10
-#
-# PRIO: shaper's priority from 1 to 8 where 1 is the highest one.
-# I do always use "5" for all my shapers.
-#
-# RULE: [source addr][:source port],[dest addr][:dest port]
-# Some examples:
-# RULE=10.1.1.0/24:80 - all traffic for network 10.1.1.0 to port 80
-# will be shaped.
-# RULE=10.2.2.5 - shaper works only for IP address 10.2.2.5
-# RULE=:25,10.2.2.128/25:5000 - all traffic from any address and port 25 to
-# address 10.2.2.128 - 10.2.2.255 and port 5000
-# will be shaped.
-# RULE=10.5.5.5:80, - shaper active only for traffic from port 80 of
-# address 10.5.5.5
-# Multiple RULE fields per one config file are allowed. For example:
-# RULE=10.1.1.2:80
-# RULE=10.1.1.2:25
-# RULE=10.1.1.2:110
-#
-# *** ATTENTION!!!
-# All shapers do work only for outgoing traffic!
-# So, if you want to build bidirectional shaper you must set it up for
-# both ethernet card. For example let's build shaper for our linux box like:
-#
-# --------- 192.168.1.1
-# BACKBONE -----eth0-| linux |-eth1------*[our client]
-# ---------
-#
-# Let all traffic from backbone to client will be shaped at 28Kbit and
-# traffic from client to backbone - at 128Kbit. We need two config files:
-#
-# ---8<-----/etc/sysconfig/cbq/cbq-28.client-out----
-# DEVICE=eth1,10Mbit,1Mbit
-# RATE=28Kbit
-# WEIGHT=2Kbit
-# PRIO=5
-# RULE=192.168.1.1
-# ---8<---------------------------------------------
-#
-# ---8<-----/etc/sysconfig/cbq/cbq-128.client-in----
-# DEVICE=eth0,10Mbit,1Mbit
-# RATE=128Kbit
-# WEIGHT=10Kbit
-# PRIO=5
-# RULE=192.168.1.1,
-# ---8<---------------------------------------------
-# ^pay attention to "," - this is source address!
-#
-# Enjoy.
git://git.onelab.eu / iproute2.git / blobdiff