+++ /dev/null
-
-Note all these are mere examples which can be customized to your needs
-
-AFCBQ
------
-AF PHB built using CBQ, DSMARK,GRED (default in GRIO mode) ,RED for BE
-and the tcindex classifier with some algorithmic mapping
-
-EFCBQ
------
-EF PHB built using CBQ (for rate control and prioritization),
-DSMARK( to remark DSCPs), tcindex classifier and RED for the BE
-traffic.
-
-EFPRIO
-------
-EF PHB using the PRIO scheduler, Token Bucket to rate control EF,
-tcindex classifier, DSMARK to remark, and RED for the BE traffic
-
-EDGE scripts
-==============
-
-CB-3(1|2)-(u32/chains)
-======================
-
-
-The major differences are that the classifier is u32 on -u32 extension
-and IPchains on the chains extension. CB stands for color Blind
-and 31 is for the mode where only a CIR and CBS are defined whereas
-32 stands for a mode where a CIR/CBS + PIR/EBS are defined.
-
-Color Blind (CB)
-==========-----=
-We look at one special subnet that we are interested in for simplicty
-reasons to demonstrate the capability. We send the packets from that
-subnet to AF4*, BE or end up dropping depending on the metering results.
-
-
-The algorithm overview is as follows:
-
-*classify:
-
-**case: subnet X
-----------------
- if !exceed meter1 tag as AF41
- else
- if !exceed meter2 tag as AF42
- else
- if !exceed meter 3 tag as AF43
- else
- drop
-
-default case: Any other subnet
--------------------------------
- if !exceed meter 5 tag as AF43
- else
- drop
-
-
-One Egress side change the DSCPs of the packets to reflect AF4* and BE
-based on the tags from the ingress.
-
--------------------------------------------------------------
-
-Color Aware
-===========
-
-Define some meters with + policing and give them IDs eg
-
-meter1=police index 1 rate $CIR1 burst $CBS1
-meter2=police index 2 rate $CIR2 burst $CBS2 etc
-
-General overview:
-classify based on the DSCPs and use the policer ids to decide tagging
-
-
-*classify on ingress:
-
-switch (dscp) {
- case AF41: /* tos&0xfc == 0x88 */
- if (!exceed meter1) break;
- case AF42: /* tos&0xfc == 0x90 */
- if (!exceed meter2) {
- tag as AF42;
- break;
- }
- case AF43: /* tos&0xfc == 0x98 */
- if (!exceed meter3) {
- tag as AF43;
- break;
- } else
- drop;
- default:
- if (!exceed meter4) tag as BE;
- else drop;
-}
-
-On the Egress side mark the proper AF tags