3 %define mainstream_version 1.0.2
4 %define module_version_varname mainstream_version
7 #libvirt-RPMFLAGS := --without storage-disk --without storage-iscsi --without storage-scsi \
8 # --without storage-fs --without storage-lvm \
9 # --without polkit --without sasl --without audit --with capng --with udev \
10 # --without netcf --without avahi --without sanlock \
11 # --without xen --without qemu --without hyperv --without phyp --without esx \
13 %define _without_storage_disk true
14 %define _without_storage_iscsi true
15 %define _without_storage_fs true
16 %define _without_storage_lvm true
17 %define _without_polkit true
18 %define _without_sasl true
19 %define _without_audit true
20 #interface requires netcf
21 #%define _without_netcf true
22 %define _without_avahi true
23 %define _without_sanlock true
24 %define _without_xen true
25 %define _without_qemu true
26 %define _without_hyperv true
27 %define _without_phyp true
28 %define _without_esx true
29 %define _without_libxl true
31 # If neither fedora nor rhel was defined, try to guess them from %{dist}
32 %if !0%{?rhel} && !0%{?fedora}
33 %{expand:%(echo "%{?dist}" | \
34 sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
35 %{expand:%(echo "%{?dist}" | \
36 sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
39 # Default to skipping autoreconf. Distros can change just this one line
40 # (or provide a command-line override) if they backport any patches that
41 # touch configure.ac or Makefile.am.
42 %{!?enable_autotools:%define enable_autotools 0}
44 # A client only build will create a libvirt.so only containing
45 # the generic RPC driver, and test driver and no libvirtd
46 # Default to a full server + client build
49 # Now turn off server build in certain cases
51 # RHEL-5 builds are client-only for s390, ppc
53 %ifnarch %{ix86} x86_64 ia64
58 # Disable all server side drivers if client only build requested
60 %define server_drivers 0
62 %define server_drivers 1
65 # Always build with dlopen'd modules
66 %define with_driver_modules 1
68 # Now set the defaults for all the important features, independent
69 # of any particular OS
71 # First the daemon itself
72 %define with_libvirtd 0%{!?_without_libvirtd:%{server_drivers}}
73 %define with_avahi 0%{!?_without_avahi:%{server_drivers}}
75 # Then the hypervisor drivers that run in libvirtd
76 %define with_xen 0%{!?_without_xen:%{server_drivers}}
77 %define with_qemu 0%{!?_without_qemu:%{server_drivers}}
78 %define with_lxc 0%{!?_without_lxc:%{server_drivers}}
79 %define with_uml 0%{!?_without_uml:%{server_drivers}}
80 %define with_libxl 0%{!?_without_libxl:%{server_drivers}}
82 %define with_qemu_tcg %{with_qemu}
83 # Change if we ever provide qemu-kvm binaries on non-x86 hosts
85 %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
87 %define qemu_kvm_arches %{ix86} x86_64
90 %ifarch %{qemu_kvm_arches}
91 %define with_qemu_kvm %{with_qemu}
93 %define with_qemu_kvm 0
96 # Then the hypervisor drivers that run outside libvirtd, in libvirt.so
97 %define with_openvz 0%{!?_without_openvz:1}
98 %define with_vbox 0%{!?_without_vbox:1}
99 %define with_vmware 0%{!?_without_vmware:1}
100 %define with_phyp 0%{!?_without_phyp:1}
101 %define with_esx 0%{!?_without_esx:1}
102 %define with_hyperv 0%{!?_without_hyperv:1}
103 %define with_xenapi 0%{!?_without_xenapi:1}
104 %define with_parallels 0%{!?_without_parallels:1}
106 # Then the secondary host drivers, which run inside libvirtd
107 %define with_interface 0%{!?_without_interface:%{server_drivers}}
108 %define with_network 0%{!?_without_network:%{server_drivers}}
109 %define with_storage_fs 0%{!?_without_storage_fs:%{server_drivers}}
110 %define with_storage_lvm 0%{!?_without_storage_lvm:%{server_drivers}}
111 %define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
112 %define with_storage_disk 0%{!?_without_storage_disk:%{server_drivers}}
113 %define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
114 %if 0%{?fedora} >= 16
115 %define with_storage_rbd 0%{!?_without_storage_rbd:%{server_drivers}}
117 %define with_storage_rbd 0
119 %if 0%{?fedora} >= 17
120 %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:%{server_drivers}}
122 %define with_storage_sheepdog 0
124 %define with_numactl 0%{!?_without_numactl:%{server_drivers}}
125 %define with_selinux 0%{!?_without_selinux:%{server_drivers}}
127 # A few optional bits off by default, we enable later
128 %define with_polkit 0%{!?_without_polkit:0}
129 %define with_capng 0%{!?_without_capng:0}
130 %define with_fuse 0%{!?_without_fuse:0}
131 %define with_netcf 0%{!?_without_netcf:0}
132 %define with_udev 0%{!?_without_udev:0}
133 %define with_hal 0%{!?_without_hal:0}
134 %define with_yajl 0%{!?_without_yajl:0}
135 %define with_nwfilter 0%{!?_without_nwfilter:0}
136 %define with_libpcap 0%{!?_without_libpcap:0}
137 %define with_macvtap 0%{!?_without_macvtap:0}
138 %define with_libnl 0%{!?_without_libnl:0}
139 %define with_audit 0%{!?_without_audit:0}
140 %define with_dtrace 0%{!?_without_dtrace:0}
141 %define with_cgconfig 0%{!?_without_cgconfig:0}
142 %define with_sanlock 0%{!?_without_sanlock:0}
143 %define with_systemd 0%{!?_without_systemd:0}
144 %define with_numad 0%{!?_without_numad:0}
145 %define with_firewalld 0%{!?_without_firewalld:0}
146 %define with_libssh2 0%{!?_without_libssh2:0}
148 # Non-server/HV driver defaults which are always enabled
149 %define with_python 0%{!?_without_python:1}
150 %define with_sasl 0%{!?_without_sasl:1}
153 # Finally set the OS / architecture specific special cases
155 # Xen is available only on i386 x86_64 ia64
156 %ifnarch %{ix86} x86_64 ia64
161 # Numactl is not available on s390[x] and ARM
162 %ifarch s390 s390x %{arm}
163 %define with_numactl 0
166 # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
167 # VMWare, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
170 %define with_openvz 0
174 %define with_vmware 0
175 %define with_xenapi 0
177 %define with_hyperv 0
178 %define with_parallels 0
181 # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier
182 # Fedora has systemd, libvirt still used sysvinit there.
183 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
184 %define with_systemd 1
187 # Fedora 18 / RHEL-7 are first where firewalld support is enabled
188 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
189 %define with_firewalld 1
192 # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
194 %define with_qemu_tcg 0
197 %define with_qemu_kvm 0
202 # RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
203 # on all archs. Other archs all have LXC available though
205 %define with_qemu_tcg 0
208 %define with_qemu_kvm 0
213 # Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
214 %if 0%{?fedora} && 0%{?fedora} < 16
220 # Fedora doesn't have new enough Xen for libxl until F18
221 %if 0%{?fedora} && 0%{?fedora} < 18
225 # PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
226 %if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
227 %define with_polkit 0%{!?_without_polkit:1}
230 # libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
231 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
232 %define with_capng 0%{!?_without_capng:1}
235 # fuse is used to provide virtualized /proc for LXC
236 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
237 %define with_fuse 0%{!?_without_fuse:1}
240 # netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
241 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
242 %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
245 # udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
246 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
247 %define with_udev 0%{!?_without_udev:%{server_drivers}}
249 %define with_hal 0%{!?_without_hal:%{server_drivers}}
252 # interface requires netcf
253 %if ! 0%{?with_netcf}
254 %define with_interface 0
257 # Enable yajl library for JSON mode with QEMU
258 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
259 %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
262 # Enable sanlock library for lock management with QEMU
263 # Sanlock is available only on i686 x86_64 for RHEL
264 %if 0%{?fedora} >= 16
265 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
268 %ifarch %{ix86} x86_64
269 %define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
273 # Enable libssh2 transport for new enough distros
274 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
275 %define with_libssh2 0%{!?_without_libssh2:1}
278 # Disable some drivers when building without libvirt daemon.
279 # The logic is the same as in configure.ac
280 %if ! %{with_libvirtd}
281 %define with_interface 0
282 %define with_network 0
288 %define with_storage_fs 0
289 %define with_storage_lvm 0
290 %define with_storage_iscsi 0
291 %define with_storage_mpath 0
292 %define with_storage_rbd 0
293 %define with_storage_sheepdog 0
294 %define with_storage_disk 0
297 %if %{with_qemu} || %{with_lxc} || %{with_uml}
298 %define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
299 # Enable libpcap library
300 %define with_libpcap 0%{!?_without_libpcap:%{server_drivers}}
301 %define with_macvtap 0%{!?_without_macvtap:%{server_drivers}}
303 # numad is used to manage the CPU and memory placement dynamically,
304 # it's not available on s390[x] and ARM.
305 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
306 %ifnarch s390 s390x %{arm}
307 %define with_numad 0%{!?_without_numad:%{server_drivers}}
316 %if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
317 %define with_audit 0%{!?_without_audit:1}
320 %if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
321 %define with_dtrace 1
324 # Pull in cgroups config system
325 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
326 %if %{with_qemu} || %{with_lxc}
327 %define with_cgconfig 0%{!?_without_cgconfig:1}
331 %if %{with_udev} || %{with_hal}
332 %define with_nodedev 1
334 %define with_nodedev 0
337 %if %{with_storage_fs} || %{with_storage_mpath} || %{with_storage_iscsi} || %{with_storage_lvm} || %{with_storage_disk}
338 %define with_storage 1
340 %define with_storage 0
344 # Force QEMU to run as non-root
345 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
346 %define qemu_user qemu
347 %define qemu_group qemu
349 %define qemu_user root
350 %define qemu_group root
354 # The RHEL-5 Xen package has some feature backports. This
355 # flag is set to enable use of those special bits on RHEL-5
362 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
363 %define with_systemd_macros 1
365 %define with_systemd_macros 0
369 Summary: Library providing a simple virtualization API
371 Version: %{mainstream_version}
374 Group: Development/Libraries
375 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
376 URL: http://libvirt.org/
378 %if %(echo %{version} | grep -o \\. | wc -l) == 3
379 %define mainturl stable_updates/
381 Source: http://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.gz
382 Patch1: libcurl.patch
383 Patch2: securityselinuxlabeltest.patch
386 Requires: libvirt-daemon = %{version}-%{release}
388 Requires: libvirt-daemon-config-network = %{version}-%{release}
391 Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
393 %if %{with_driver_modules}
395 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
398 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
401 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
404 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
407 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
410 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
411 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
412 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
413 Requires: libvirt-daemon-driver-network = %{version}-%{release}
414 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
415 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
418 Requires: libvirt-client = %{version}-%{release}
420 # All build-time requirements. Run-time requirements are
421 # listed against each sub-RPM
422 %if 0%{?enable_autotools}
423 BuildRequires: autoconf
424 BuildRequires: automake
425 BuildRequires: gettext-devel
426 BuildRequires: libtool
428 BuildRequires: python-devel
430 BuildRequires: systemd-units
433 BuildRequires: xen-devel
435 BuildRequires: libxml2-devel
436 BuildRequires: xhtml1-dtds
437 BuildRequires: libxslt
438 BuildRequires: readline-devel
439 BuildRequires: ncurses-devel
440 BuildRequires: gettext
441 BuildRequires: libtasn1-devel
442 BuildRequires: gnutls-devel
443 BuildRequires: libattr-devel
444 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
445 # for augparse, optionally used in testing
446 BuildRequires: augeas
449 BuildRequires: hal-devel
452 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
453 BuildRequires: systemd-devel >= 185
455 BuildRequires: libudev-devel >= 145
457 BuildRequires: libpciaccess-devel >= 0.10.9
460 BuildRequires: yajl-devel
463 # make sure libvirt is built with new enough sanlock on
464 # distros that have it; required for on_lockfailure
465 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
466 BuildRequires: sanlock-devel >= 2.4
468 BuildRequires: sanlock-devel >= 1.8
472 BuildRequires: libpcap-devel
475 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
476 BuildRequires: libnl3-devel
478 BuildRequires: libnl-devel
482 BuildRequires: avahi-devel
485 BuildRequires: libselinux-devel
488 BuildRequires: dnsmasq >= 2.41
489 BuildRequires: iptables
490 BuildRequires: iptables-ipv6
494 BuildRequires: ebtables
496 BuildRequires: module-init-tools
498 BuildRequires: cyrus-sasl-devel
501 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
502 # Only need the binary, not -devel
503 BuildRequires: polkit >= 0.93
505 BuildRequires: PolicyKit-devel >= 0.6
508 %if %{with_storage_fs}
509 # For mount/umount in FS driver
510 BuildRequires: util-linux
514 BuildRequires: /usr/bin/qemu-img
518 BuildRequires: /usr/sbin/qcow-create
521 %if %{with_storage_lvm}
525 %if %{with_storage_iscsi}
527 BuildRequires: iscsi-initiator-utils
529 %if %{with_storage_disk}
531 BuildRequires: parted-devel
533 # Broken RHEL-5 parted RPM is missing a dep
534 BuildRequires: e2fsprogs-devel
537 %if %{with_storage_mpath}
538 # For Multipath support
540 # Broken RHEL-5 packaging has header files in main RPM :-(
541 BuildRequires: device-mapper
543 BuildRequires: device-mapper-devel
545 %if %{with_storage_rbd}
546 BuildRequires: ceph-devel
550 # For QEMU/LXC numa info
551 BuildRequires: numactl-devel
554 BuildRequires: libcap-ng-devel >= 0.5.0
557 BuildRequires: fuse-devel >= 2.8.6
559 %if %{with_phyp} || %{with_libssh2}
560 BuildRequires: libssh2-devel >= 1.3.0
564 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
565 BuildRequires: netcf-devel >= 0.2.2
567 %if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
568 BuildRequires: netcf-devel >= 0.1.8
570 BuildRequires: netcf-devel >= 0.1.4
575 %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
576 BuildRequires: libcurl-devel
578 BuildRequires: curl-devel
582 BuildRequires: libwsman-devel >= 2.2.3
585 BuildRequires: audit-libs-devel
588 # we need /usr/sbin/dtrace
589 BuildRequires: systemtap-sdt-devel
592 %if %{with_storage_fs}
593 # For mount/umount in FS driver
594 BuildRequires: util-linux
595 # For showmount in FS driver (netfs discovery)
596 BuildRequires: nfs-utils
599 %if %{with_firewalld}
600 # Communication with the firewall daemon uses DBus
601 BuildRequires: dbus-devel
604 # Fedora build root suckage
607 # For storage wiping with different algorithms
614 Provides: bundled(gnulib)
617 Libvirt is a C toolkit to interact with the virtualization capabilities
618 of recent versions of Linux (and other OSes). The main package includes
619 the libvirtd server exporting the virtualization support.
622 Summary: API reference and website documentation
623 Group: Development/Libraries
626 Includes the API reference for the libvirt C library, and a complete
627 copy of the libvirt.org website documentation.
631 Summary: Server side daemon and supporting files for libvirt library
632 Group: Development/Libraries
634 # All runtime requirements for the libvirt package (runtime requrements
635 # for subpackages are listed later in those subpackages)
637 # The client side, i.e. shared libs and virsh are in a subpackage
638 Requires: %{name}-client = %{version}-%{release}
640 # for modprobe of pci devices
641 Requires: module-init-tools
642 # for /sbin/ip & /sbin/tc
652 Requires: dnsmasq >= 2.41
655 %if %{with_network} || %{with_nwfilter}
657 Requires: iptables-ipv6
662 %if %{with_netcf} && (0%{?fedora} >= 18 || 0%{?rhel} >= 7)
663 Requires: netcf-libs >= 0.2.2
665 # needed for device enumeration
670 %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7
671 Requires: systemd >= 185
673 Requires: udev >= 145
677 %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
678 Requires: polkit >= 0.93
680 Requires: PolicyKit >= 0.6
683 %if %{with_storage_fs}
687 # For pool-build probing for existing pools
688 BuildRequires: libblkid-devel >= 2.17
690 %if 0%{?fedora} >= 11
691 Requires: glusterfs-client >= 2.0.1
696 Requires: /usr/bin/qemu-img
697 # For image compression
705 Requires: /usr/sbin/qcow-create
708 %if %{with_storage_lvm}
712 %if %{with_storage_iscsi}
714 Requires: iscsi-initiator-utils
716 %if %{with_storage_disk}
719 Requires: device-mapper
721 %if %{with_storage_mpath}
722 # For multipath support
723 Requires: device-mapper
725 %if %{with_storage_sheepdog}
726 # For Sheepdog support
732 %ifarch %{ix86} x86_64 ia64
733 # For virConnectGetSysinfo
736 # For service management
738 Requires(post): systemd-units
739 Requires(post): systemd-sysv
740 Requires(preun): systemd-units
741 Requires(postun): systemd-units
746 # libvirtd depends on 'messagebus' service
750 Server side daemon required to manage the virtualization capabilities
751 of recent versions of Linux. Requires a hypervisor specific sub-RPM
752 for specific drivers.
755 %package daemon-config-network
756 Summary: Default configuration files for the libvirtd daemon
757 Group: Development/Libraries
759 Requires: libvirt-daemon = %{version}-%{release}
761 %description daemon-config-network
762 Default configuration files for setting up NAT based networking
766 %package daemon-config-nwfilter
767 Summary: Network filter configuration files for the libvirtd daemon
768 Group: Development/Libraries
770 Requires: libvirt-daemon = %{version}-%{release}
772 %description daemon-config-nwfilter
773 Network filter configuration files for cleaning guest traffic
776 %if %{with_driver_modules}
778 %package daemon-driver-network
779 Summary: Network driver plugin for the libvirtd daemon
780 Group: Development/Libraries
781 Requires: libvirt-daemon = %{version}-%{release}
783 %description daemon-driver-network
784 The network driver plugin for the libvirtd daemon, providing
785 an implementation of the virtual network APIs using the Linux
791 %package daemon-driver-nwfilter
792 Summary: Nwfilter driver plugin for the libvirtd daemon
793 Group: Development/Libraries
794 Requires: libvirt-daemon = %{version}-%{release}
796 %description daemon-driver-nwfilter
797 The nwfilter driver plugin for the libvirtd daemon, providing
798 an implementation of the firewall APIs using the ebtables,
799 iptables and ip6tables capabilities
804 %package daemon-driver-nodedev
805 Summary: Nodedev driver plugin for the libvirtd daemon
806 Group: Development/Libraries
807 Requires: libvirt-daemon = %{version}-%{release}
809 %description daemon-driver-nodedev
810 The nodedev driver plugin for the libvirtd daemon, providing
811 an implementation of the node device APIs using the udev
816 %if %{with_interface}
817 %package daemon-driver-interface
818 Summary: Interface driver plugin for the libvirtd daemon
819 Group: Development/Libraries
820 Requires: libvirt-daemon = %{version}-%{release}
822 %description daemon-driver-interface
823 The interface driver plugin for the libvirtd daemon, providing
824 an implementation of the network interface APIs using the
829 %package daemon-driver-secret
830 Summary: Secret driver plugin for the libvirtd daemon
831 Group: Development/Libraries
832 Requires: libvirt-daemon = %{version}-%{release}
834 %description daemon-driver-secret
835 The secret driver plugin for the libvirtd daemon, providing
836 an implementation of the secret key APIs.
840 %package daemon-driver-storage
841 Summary: Storage driver plugin for the libvirtd daemon
842 Group: Development/Libraries
843 Requires: libvirt-daemon = %{version}-%{release}
845 %description daemon-driver-storage
846 The storage driver plugin for the libvirtd daemon, providing
847 an implementation of the storage APIs using LVM, iSCSI,
853 %package daemon-driver-qemu
854 Summary: Qemu driver plugin for the libvirtd daemon
855 Group: Development/Libraries
856 Requires: libvirt-daemon = %{version}-%{release}
857 # There really is a hard cross-driver dependency here
858 Requires: libvirt-daemon-driver-network = %{version}-%{release}
860 %description daemon-driver-qemu
861 The qemu driver plugin for the libvirtd daemon, providing
862 an implementation of the hypervisor driver APIs using
868 %package daemon-driver-lxc
869 Summary: LXC driver plugin for the libvirtd daemon
870 Group: Development/Libraries
871 Requires: libvirt-daemon = %{version}-%{release}
872 # There really is a hard cross-driver dependency here
873 Requires: libvirt-daemon-driver-network = %{version}-%{release}
875 %description daemon-driver-lxc
876 The LXC driver plugin for the libvirtd daemon, providing
877 an implementation of the hypervisor driver APIs using
883 %package daemon-driver-uml
884 Summary: Uml driver plugin for the libvirtd daemon
885 Group: Development/Libraries
886 Requires: libvirt-daemon = %{version}-%{release}
888 %description daemon-driver-uml
889 The UML driver plugin for the libvirtd daemon, providing
890 an implementation of the hypervisor driver APIs using
896 %package daemon-driver-xen
897 Summary: Xen driver plugin for the libvirtd daemon
898 Group: Development/Libraries
899 Requires: libvirt-daemon = %{version}-%{release}
901 %description daemon-driver-xen
902 The Xen driver plugin for the libvirtd daemon, providing
903 an implementation of the hypervisor driver APIs using
909 %package daemon-driver-libxl
910 Summary: Libxl driver plugin for the libvirtd daemon
911 Group: Development/Libraries
912 Requires: libvirt-daemon = %{version}-%{release}
914 %description daemon-driver-libxl
915 The Libxl driver plugin for the libvirtd daemon, providing
916 an implementation of the hypervisor driver APIs using
919 %endif # %{with_driver_modules}
925 Summary: Server side daemon & driver required to run QEMU guests
926 Group: Development/Libraries
928 Requires: libvirt-daemon = %{version}-%{release}
929 %if %{with_driver_modules}
930 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
931 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
932 Requires: libvirt-daemon-driver-network = %{version}-%{release}
933 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
934 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
935 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
936 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
940 %description daemon-qemu
941 Server side daemon and driver required to manage the virtualization
942 capabilities of the QEMU TCG emulators
948 Summary: Server side daemon & driver required to run KVM guests
949 Group: Development/Libraries
951 Requires: libvirt-daemon = %{version}-%{release}
952 %if %{with_driver_modules}
953 Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
954 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
955 Requires: libvirt-daemon-driver-network = %{version}-%{release}
956 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
957 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
958 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
959 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
963 %description daemon-kvm
964 Server side daemon and driver required to manage the virtualization
965 capabilities of the KVM hypervisor
971 Summary: Server side daemon & driver required to run LXC guests
972 Group: Development/Libraries
974 Requires: libvirt-daemon = %{version}-%{release}
975 %if %{with_driver_modules}
976 Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
977 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
978 Requires: libvirt-daemon-driver-network = %{version}-%{release}
979 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
980 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
981 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
982 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
985 %description daemon-lxc
986 Server side daemon and driver required to manage the virtualization
993 Summary: Server side daemon & driver required to run UML guests
994 Group: Development/Libraries
996 Requires: libvirt-daemon = %{version}-%{release}
997 %if %{with_driver_modules}
998 Requires: libvirt-daemon-driver-uml = %{version}-%{release}
999 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1000 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1001 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1002 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1003 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1004 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1006 # There are no UML kernel RPMs in Fedora/RHEL to depend on.
1008 %description daemon-uml
1009 Server side daemon and driver required to manage the virtualization
1014 %if %{with_xen} || %{with_libxl}
1016 Summary: Server side daemon & driver required to run XEN guests
1017 Group: Development/Libraries
1019 Requires: libvirt-daemon = %{version}-%{release}
1020 %if %{with_driver_modules}
1022 Requires: libvirt-daemon-driver-xen = %{version}-%{release}
1025 Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
1027 Requires: libvirt-daemon-driver-interface = %{version}-%{release}
1028 Requires: libvirt-daemon-driver-network = %{version}-%{release}
1029 Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
1030 Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
1031 Requires: libvirt-daemon-driver-secret = %{version}-%{release}
1032 Requires: libvirt-daemon-driver-storage = %{version}-%{release}
1036 %description daemon-xen
1037 Server side daemon and driver required to manage the virtualization
1040 %endif # %{with_libvirtd}
1043 Summary: Client side library and utilities of the libvirt library
1044 Group: Development/Libraries
1047 # So remote clients can access libvirt over SSH tunnel
1048 # (client invokes 'nc' against the UNIX socket on the server)
1050 # Needed by libvirt-guests init script.
1052 # Needed by virt-pki-validate script.
1053 Requires: gnutls-utils
1054 # Needed for probing the power management features of the host.
1057 Requires: cyrus-sasl
1058 # Not technically required, but makes 'out-of-box' config
1059 # work correctly & doesn't have onerous dependencies
1060 Requires: cyrus-sasl-md5
1064 Shared libraries and client binaries needed to access to the
1065 virtualization capabilities of recent versions of Linux (and other OSes).
1068 Summary: Libraries, includes, etc. to compile with the libvirt library
1069 Group: Development/Libraries
1070 Requires: %{name}-client = %{version}-%{release}
1071 Requires: %{name}-docs = %{version}-%{release}
1075 Include header files & development libraries for the libvirt C library.
1078 %package lock-sanlock
1079 Summary: Sanlock lock manager plugin for QEMU driver
1080 Group: Development/Libraries
1081 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 6
1082 Requires: sanlock >= 2.4
1084 Requires: sanlock >= 1.8
1086 #for virt-sanlock-cleanup require augeas
1088 Requires: %{name}-daemon = %{version}-%{release}
1089 Requires: %{name}-client = %{version}-%{release}
1091 %description lock-sanlock
1092 Includes the Sanlock lock manager plugin for the QEMU
1098 Summary: Python bindings for the libvirt library
1099 Group: Development/Libraries
1100 Requires: %{name}-client = %{version}-%{release}
1103 The libvirt-python package contains a module that permits applications
1104 written in the Python programming language to use the interface
1105 supplied by the libvirt library to use the virtualization capabilities
1106 of recent versions of Linux (and other OSes).
1116 %define _without_xen --without-xen
1120 %define _without_qemu --without-qemu
1123 %if ! %{with_openvz}
1124 %define _without_openvz --without-openvz
1128 %define _without_lxc --without-lxc
1132 %define _without_vbox --without-vbox
1135 %if ! %{with_xenapi}
1136 %define _without_xenapi --without-xenapi
1140 %define _without_libxl --without-libxl
1144 %define _without_sasl --without-sasl
1148 %define _without_avahi --without-avahi
1152 %define _without_phyp --without-phyp
1156 %define _without_esx --without-esx
1159 %if ! %{with_hyperv}
1160 %define _without_hyperv --without-hyperv
1163 %if ! %{with_vmware}
1164 %define _without_vmware --without-vmware
1167 %if ! %{with_parallels}
1168 %define _without_parallels --without-parallels
1171 %if ! %{with_polkit}
1172 %define _without_polkit --without-polkit
1175 %if ! %{with_python}
1176 %define _without_python --without-python
1179 %if ! %{with_libvirtd}
1180 %define _without_libvirtd --without-libvirtd
1184 %define _without_uml --without-uml
1188 %define _with_rhel5_api --with-rhel5-api
1191 %if ! %{with_interface}
1192 %define _without_interface --without-interface
1195 %if ! %{with_network}
1196 %define _without_network --without-network
1199 %if ! %{with_storage_fs}
1200 %define _without_storage_fs --without-storage-fs
1203 %if ! %{with_storage_lvm}
1204 %define _without_storage_lvm --without-storage-lvm
1207 %if ! %{with_storage_iscsi}
1208 %define _without_storage_iscsi --without-storage-iscsi
1211 %if ! %{with_storage_disk}
1212 %define _without_storage_disk --without-storage-disk
1215 %if ! %{with_storage_mpath}
1216 %define _without_storage_mpath --without-storage-mpath
1219 %if ! %{with_storage_rbd}
1220 %define _without_storage_rbd --without-storage-rbd
1223 %if ! %{with_storage_sheepdog}
1224 %define _without_storage_sheepdog --without-storage-sheepdog
1227 %if ! %{with_numactl}
1228 %define _without_numactl --without-numactl
1232 %define _without_numad --without-numad
1236 %define _without_capng --without-capng
1240 %define _without_fuse --without-fuse
1244 %define _without_netcf --without-netcf
1247 %if ! %{with_selinux}
1248 %define _without_selinux --without-selinux
1252 %define _without_hal --without-hal
1256 %define _without_udev --without-udev
1260 %define _without_yajl --without-yajl
1263 %if ! %{with_sanlock}
1264 %define _without_sanlock --without-sanlock
1267 %if ! %{with_libpcap}
1268 %define _without_libpcap --without-libpcap
1271 %if ! %{with_macvtap}
1272 %define _without_macvtap --without-macvtap
1276 %define _without_audit --without-audit
1279 %if ! %{with_dtrace}
1280 %define _without_dtrace --without-dtrace
1283 %if ! %{with_driver_modules}
1284 %define _without_driver_modules --without-driver-modules
1287 %if %{with_firewalld}
1288 %define _with_firewalld --with-firewalld
1291 %define when %(date +"%%F-%%T")
1292 %define where %(hostname)
1293 %define who %{?packager}%{!?packager:Unknown}
1294 %define with_packager --with-packager="%{who}, %{when}, %{where}"
1295 %define with_packager_version --with-packager-version="%{release}"
1298 %define init_scripts --with-init_script=systemd
1300 %define init_scripts --with-init_script=redhat
1303 %if 0%{?enable_autotools}
1308 %if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
1309 %define with_selinux_mount --with-selinux-mount="/sys/fs/selinux"
1311 %define with_selinux_mount --with-selinux-mount="/selinux"
1315 %configure %{?_without_xen} \
1317 %{?_without_openvz} \
1320 %{?_without_libxl} \
1321 %{?_without_xenapi} \
1323 %{?_without_avahi} \
1324 %{?_without_polkit} \
1325 %{?_without_python} \
1326 %{?_without_libvirtd} \
1330 %{?_without_hyperv} \
1331 %{?_without_vmware} \
1332 %{?_without_parallels} \
1333 %{?_without_interface} \
1334 %{?_without_network} \
1335 %{?_with_rhel5_api} \
1336 %{?_without_storage_fs} \
1337 %{?_without_storage_lvm} \
1338 %{?_without_storage_iscsi} \
1339 %{?_without_storage_disk} \
1340 %{?_without_storage_mpath} \
1341 %{?_without_storage_rbd} \
1342 %{?_without_storage_sheepdog} \
1343 %{?_without_numactl} \
1344 %{?_without_numad} \
1345 %{?_without_capng} \
1347 %{?_without_netcf} \
1348 %{?_without_selinux} \
1349 %{?_with_selinux_mount} \
1353 %{?_without_sanlock} \
1354 %{?_without_libpcap} \
1355 %{?_without_macvtap} \
1356 %{?_without_audit} \
1357 %{?_without_dtrace} \
1358 %{?_without_driver_modules} \
1359 %{?_with_firewalld} \
1361 %{with_packager_version} \
1362 --with-qemu-user=%{qemu_user} \
1363 --with-qemu-group=%{qemu_group} \
1365 make %{?_smp_mflags}
1371 %makeinstall SYSTEMD_UNIT_DIR=%{buildroot}%{_unitdir}
1372 for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
1374 (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
1376 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
1377 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
1378 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
1379 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
1380 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
1381 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
1382 %if %{with_driver_modules}
1383 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
1384 rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
1388 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
1389 # We don't want to install /etc/libvirt/qemu/networks in the main %files list
1390 # because if the admin wants to delete the default network completely, we don't
1391 # want to end up re-incarnating it on every RPM upgrade.
1392 install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
1393 cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
1394 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1395 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1396 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1397 # Strip auto-generated UUID - we need it generated per-install
1398 sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
1400 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
1401 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1404 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
1405 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1409 %if ! %{with_sanlock}
1410 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
1411 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1415 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
1416 rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1419 %if ! %{with_python}
1420 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
1422 rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}/examples
1426 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
1427 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
1430 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
1431 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
1434 rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
1437 mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} \
1438 $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-docs-%{version}
1441 %ifarch %{power64} s390x x86_64 ia64 alpha sparc64
1442 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
1443 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
1444 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
1445 $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
1449 %if 0%{?fedora} < 14 && 0%{?rhel} < 6
1450 rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
1459 # These tests don't current work in a mock build root
1460 for i in nodeinfotest seclabeltest
1463 printf 'int main(void) { return 0; }' > $i.c
1464 printf '#!/bin/sh\nexit 0\n' > $i
1469 %if %{with_libvirtd}
1471 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1472 # Normally 'setup' adds this in /etc/passwd, but this is
1473 # here for case of upgrades from earlier Fedora/RHEL. This
1474 # UID/GID pair is reserved for qemu:qemu
1475 getent group kvm >/dev/null || groupadd -g 36 -r kvm
1476 getent group qemu >/dev/null || groupadd -g 107 -r qemu
1477 getent passwd qemu >/dev/null || \
1478 useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
1485 # All newly defined networks will have a mac address for the bridge
1486 # auto-generated, but networks already existing at the time of upgrade
1487 # will not. We need to go through all the network configs, look for
1488 # those that don't have a mac address, and add one.
1490 network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
1491 grep -L "mac address" *.xml; \
1492 cd %{_sysconfdir}/libvirt/qemu/networks && \
1493 grep -L "mac address" *.xml) 2>/dev/null \
1496 for file in $network_files
1498 # each file exists in either the config or state directory (or both) and
1499 # does not have a mac address specified in either. We add the same mac
1500 # address to both files (or just one, if the other isn't there)
1502 mac4=`printf '%X' $(($RANDOM % 256))`
1503 mac5=`printf '%X' $(($RANDOM % 256))`
1504 mac6=`printf '%X' $(($RANDOM % 256))`
1505 for dir in %{_localstatedir}/lib/libvirt/network \
1506 %{_sysconfdir}/libvirt/qemu/networks
1508 if test -f $dir/$file
1511 "s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
1515 echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
1517 mv -f $dir/$file.orig $dir/$file
1519 rm -f $dir/$file.orig
1527 %if %{with_systemd_macros}
1528 %systemd_post libvirtd.service
1530 if [ $1 -eq 1 ] ; then
1531 # Initial installation
1532 /bin/systemctl enable virtlockd.socket >/dev/null 2>&1 || :
1533 /bin/systemctl enable libvirtd.service >/dev/null 2>&1 || :
1537 %if %{with_cgconfig}
1538 # Starting with Fedora 16/RHEL-7, systemd automounts all cgroups,
1539 # and cgconfig is no longer a necessary service.
1540 %if (0%{?rhel} && 0%{?rhel} < 7) || (0%{?fedora} && 0%{?fedora} < 16)
1541 if [ "$1" -eq "1" ]; then
1542 /sbin/chkconfig cgconfig on
1547 /sbin/chkconfig --add libvirtd
1548 if [ "$1" -ge "1" ]; then
1549 /sbin/service libvirtd condrestart > /dev/null 2>&1
1555 %if %{with_systemd_macros}
1556 %systemd_preun libvirtd.service
1558 if [ $1 -eq 0 ] ; then
1559 # Package removal, not upgrade
1560 /bin/systemctl --no-reload disable virtlockd.socket > /dev/null 2>&1 || :
1561 /bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || :
1562 /bin/systemctl stop libvirtd.service > /dev/null 2>&1 || :
1563 /bin/systemctl stop virtlockd.service > /dev/null 2>&1 || :
1568 /sbin/service libvirtd stop 1>/dev/null 2>&1
1569 /sbin/chkconfig --del libvirtd
1575 %if %{with_systemd_macros}
1576 %systemd_postun_with_restart libvirtd.service
1578 /bin/systemctl daemon-reload >/dev/null 2>&1 || :
1579 if [ $1 -ge 1 ] ; then
1580 # Package upgrade, not uninstall
1581 /bin/systemctl status virtlockd.service >/dev/null 2>&1
1582 if [ $? = 1 ] ; then
1583 /bin/systemctl kill --signal=USR1 virtlockd.service >/dev/null 2>&1 || :
1585 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1591 %post daemon-config-network
1592 if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
1593 UUID=`/usr/bin/uuidgen`
1594 sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
1595 < %{_datadir}/libvirt/networks/default.xml \
1596 > %{_sysconfdir}/libvirt/qemu/networks/default.xml
1597 ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
1602 %triggerun -- libvirt < 0.9.4
1603 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
1605 # If the package is allowed to autostart:
1606 /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
1608 # Run these because the SysV package being removed won't do them
1609 /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
1610 /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
1612 %endif # %{with_libvirtd}
1617 %if %{with_systemd_macros}
1618 %systemd_preun libvirt-guests.service
1622 /sbin/chkconfig --del libvirt-guests
1623 rm -f /var/lib/libvirt/libvirt-guests
1631 %if %{with_systemd_macros}
1632 %systemd_post libvirt-guests.service
1635 /sbin/chkconfig --add libvirt-guests
1642 %if %{with_systemd_macros}
1643 %systemd_postun_with_restart libvirt-guests.service
1645 %triggerun client -- libvirt < 0.9.4
1646 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
1648 # If the package is allowed to autostart:
1649 /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
1651 # Run these because the SysV package being removed won't do them
1652 /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
1653 /bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || :
1658 if getent group sanlock > /dev/null ; then
1659 chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
1660 chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
1665 %defattr(-, root, root)
1668 %defattr(-, root, root)
1670 %dir %{_datadir}/doc/libvirt-docs-%{version}
1671 %dir %{_datadir}/doc/libvirt-docs-%{version}/html
1672 %{_datadir}/doc/libvirt-docs-%{version}/html/*
1675 %dir %{_datadir}/gtk-doc/html/libvirt/
1676 %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
1677 %doc %{_datadir}/gtk-doc/html/libvirt/*.html
1678 %doc %{_datadir}/gtk-doc/html/libvirt/*.png
1679 %doc %{_datadir}/gtk-doc/html/libvirt/*.css
1681 %if %{with_libvirtd}
1683 %defattr(-, root, root)
1685 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1686 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
1689 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
1690 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
1691 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
1694 %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
1697 %{_unitdir}/libvirtd.service
1698 %{_unitdir}/virtlockd.service
1699 %{_unitdir}/virtlockd.socket
1701 %{_sysconfdir}/rc.d/init.d/libvirtd
1702 %{_sysconfdir}/rc.d/init.d/virtlockd
1704 %doc daemon/libvirtd.upstart
1705 %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
1706 %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
1707 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
1708 %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
1709 %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
1711 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
1712 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
1713 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
1715 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
1718 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
1720 %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
1721 %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
1722 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
1725 %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
1726 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
1729 %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
1732 %dir %{_datadir}/libvirt/
1735 %dir %{_datadir}/libvirt/networks/
1736 %{_datadir}/libvirt/networks/default.xml
1739 %ghost %dir %{_localstatedir}/run/libvirt/
1741 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
1742 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
1743 %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
1744 %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
1747 %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
1748 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
1749 %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
1752 %ghost %dir %{_localstatedir}/run/libvirt/lxc/
1753 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
1756 %ghost %dir %{_localstatedir}/run/libvirt/uml/
1757 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
1760 %ghost %dir %{_localstatedir}/run/libvirt/libxl/
1761 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
1764 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/xen/
1767 %ghost %dir %{_localstatedir}/run/libvirt/network/
1768 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
1769 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
1772 %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
1773 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
1776 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
1777 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
1781 %{_datadir}/augeas/lenses/libvirtd_lxc.aug
1782 %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
1785 %{_datadir}/augeas/lenses/libvirtd.aug
1786 %{_datadir}/augeas/lenses/tests/test_libvirtd.aug
1787 %{_datadir}/augeas/lenses/libvirt_lockd.aug
1788 %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
1791 %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1792 %{_datadir}/polkit-1/actions/org.libvirt.unix.policy
1794 %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
1798 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
1801 %attr(0755, root, root) %{_libexecdir}/libvirt_lxc
1804 %if %{with_storage_disk}
1805 %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1808 %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
1809 %attr(0755, root, root) %{_sbindir}/libvirtd
1810 %attr(0755, root, root) %{_sbindir}/virtlockd
1812 %{_mandir}/man8/libvirtd.8*
1814 %if %{with_driver_modules}
1816 %files daemon-config-network
1817 %defattr(-, root, root)
1820 %if %{with_nwfilter}
1821 %files daemon-config-nwfilter
1822 %defattr(-, root, root)
1823 %{_sysconfdir}/libvirt/nwfilter/*.xml
1826 %if %{with_interface}
1827 %files daemon-driver-interface
1828 %defattr(-, root, root)
1829 %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
1833 %files daemon-driver-network
1834 %defattr(-, root, root)
1835 %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
1839 %files daemon-driver-nodedev
1840 %defattr(-, root, root)
1841 %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
1844 %if %{with_nwfilter}
1845 %files daemon-driver-nwfilter
1846 %defattr(-, root, root)
1847 %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
1850 %files daemon-driver-secret
1851 %defattr(-, root, root)
1852 %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
1855 %files daemon-driver-storage
1856 %defattr(-, root, root)
1857 %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
1861 %files daemon-driver-qemu
1862 %defattr(-, root, root)
1863 %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
1867 %files daemon-driver-lxc
1868 %defattr(-, root, root)
1869 %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
1873 %files daemon-driver-uml
1874 %defattr(-, root, root)
1875 %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so
1879 %files daemon-driver-xen
1880 %defattr(-, root, root)
1881 %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so
1885 %files daemon-driver-libxl
1886 %defattr(-, root, root)
1887 %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
1889 %endif # %{with_driver_modules}
1891 %if %{with_qemu_tcg}
1893 %defattr(-, root, root)
1896 %if %{with_qemu_kvm}
1898 %defattr(-, root, root)
1903 %defattr(-, root, root)
1908 %defattr(-, root, root)
1911 %if %{with_xen} || %{with_libxl}
1913 %defattr(-, root, root)
1915 %endif # %{with_libvirtd}
1919 %defattr(-, root, root)
1921 %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
1923 %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
1924 %{_datadir}/augeas/lenses/libvirt_sanlock.aug
1925 %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
1926 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
1927 %{_sbindir}/virt-sanlock-cleanup
1928 %{_mandir}/man8/virt-sanlock-cleanup.8*
1929 %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
1932 %files client -f %{name}.lang
1933 %defattr(-, root, root)
1934 %doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
1936 %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
1937 %{_mandir}/man1/virsh.1*
1938 %{_mandir}/man1/virt-xml-validate.1*
1939 %{_mandir}/man1/virt-pki-validate.1*
1940 %{_mandir}/man1/virt-host-validate.1*
1942 %{_bindir}/virt-xml-validate
1943 %{_bindir}/virt-pki-validate
1944 %{_bindir}/virt-host-validate
1945 %{_libdir}/lib*.so.*
1948 %{_datadir}/systemtap/tapset/libvirt_probes*.stp
1949 %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
1950 %{_datadir}/systemtap/tapset/libvirt_functions.stp
1953 %dir %{_datadir}/libvirt/
1954 %dir %{_datadir}/libvirt/schemas/
1956 %{_datadir}/libvirt/schemas/basictypes.rng
1957 %{_datadir}/libvirt/schemas/capability.rng
1958 %{_datadir}/libvirt/schemas/domain.rng
1959 %{_datadir}/libvirt/schemas/domaincommon.rng
1960 %{_datadir}/libvirt/schemas/domainsnapshot.rng
1961 %{_datadir}/libvirt/schemas/interface.rng
1962 %{_datadir}/libvirt/schemas/network.rng
1963 %{_datadir}/libvirt/schemas/networkcommon.rng
1964 %{_datadir}/libvirt/schemas/nodedev.rng
1965 %{_datadir}/libvirt/schemas/nwfilter.rng
1966 %{_datadir}/libvirt/schemas/secret.rng
1967 %{_datadir}/libvirt/schemas/storageencryption.rng
1968 %{_datadir}/libvirt/schemas/storagepool.rng
1969 %{_datadir}/libvirt/schemas/storagevol.rng
1971 %{_datadir}/libvirt/cpu_map.xml
1974 %{_unitdir}/libvirt-guests.service
1976 %{_sysconfdir}/rc.d/init.d/libvirt-guests
1978 %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
1979 %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
1980 %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
1983 %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
1987 %defattr(-, root, root)
1990 %dir %{_includedir}/libvirt
1991 %{_includedir}/libvirt/*.h
1992 %{_libdir}/pkgconfig/libvirt.pc
1994 %dir %{_datadir}/libvirt/api/
1995 %{_datadir}/libvirt/api/libvirt-api.xml
1996 %{_datadir}/libvirt/api/libvirt-qemu-api.xml
1997 %{_datadir}/libvirt/api/libvirt-lxc-api.xml
1999 %doc docs/*.html docs/html docs/*.gif
2000 %doc docs/libvirt-api.xml
2001 %doc examples/hellolibvirt
2002 %doc examples/domain-events/events-c
2003 %doc examples/dominfo
2004 %doc examples/domsuspend
2005 %doc examples/openauth
2007 %doc examples/systemtap
2011 %defattr(-, root, root)
2013 %doc AUTHORS NEWS README COPYING.LIB
2014 %{_libdir}/python*/site-packages/libvirt.py*
2015 %{_libdir}/python*/site-packages/libvirt_qemu.py*
2016 %{_libdir}/python*/site-packages/libvirt_lxc.py*
2017 %{_libdir}/python*/site-packages/libvirtmod*
2018 %doc python/tests/*.py
2020 %doc examples/python
2021 %doc examples/domain-events/events-python
2025 * Wed Jan 30 2013 Daniel Veillard <veillard@redhat.com> - 1.0.2-1
2027 - S390 architecture improvement
2028 - Power architecture improvement
2029 - large Coverity report cleanups and associated bug fixes
2030 - virTypedParams* APIs to helps with those data structures
2031 - a lot of bug fixes and overall improvements
2033 * Fri Nov 2 2012 Daniel Veillard <veillard@redhat.com> - 1.0.0-1
2034 - virNodeGetCPUMap: Define public API
2035 - Add systemd journal support
2036 - Add a qemu capabilities cache manager
2037 - USB migration support
2038 - various improvement and fixes when using QMP QEmu interface
2039 - Support for Xen 4.2
2040 - Lot of localization enhancements
2041 - a lot of bug fixes, improvements and portability work
2043 * Mon Sep 24 2012 Daniel Veillard <veillard@redhat.com> - 0.10.2-1
2044 - network: define new API virNetworkUpdate
2045 - add support for QEmu sandbox support
2046 - blockjob: add virDomainBlockCommit
2047 - New APIs to get/set Node memory parameters
2048 - new API virConnectListAllSecrets
2049 - new API virConnectListAllNWFilters
2050 - new API virConnectListAllNodeDevices
2051 - parallels: add support of containers to the driver
2052 - new API virConnectListAllInterfaces
2053 - new API virConnectListAllNetworks
2054 - new API virStoragePoolListAllVolumes
2055 - Add PMSUSPENDED life cycle event
2056 - new API virStorageListAllStoragePools
2057 - Add per-guest S3/S4 state configuration
2058 - qemu: Support for Block Device IO Limits
2059 - a lot of bug fixes, improvements and portability work
2061 * Fri Aug 31 2012 Daniel Veillard <veillard@redhat.com> - 0.10.1-1
2062 - bugfixes and a brown paper bag
2064 * Wed Aug 29 2012 Daniel Veillard <veillard@redhat.com> - 0.10.0-1
2065 - agent: add qemuAgentArbitraryCommand() for general qemu agent command
2066 - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
2067 - network: use firewalld instead of iptables, when available
2068 - network: make network driver vlan-aware
2069 - esx: Implement network driver
2070 - driver for parallels hypervisor
2071 - Various LXC improvements
2072 - Add virDomainGetHostname
2073 - a lot of bug fixes, improvements and portability work
2075 * Mon Jul 2 2012 Daniel Veillard <veillard@redhat.com> - 0.9.13-1
2076 - S390: support for s390(x)
2077 - snapshot: implement new APIs for esx and vbox
2078 - snapshot: new query APIs and many improvements
2079 - virsh: Allow users to reedit rejected XML
2080 - nwfilter: add DHCP snooping
2081 - Enable driver modules in libvirt RPM
2082 - Default to enable driver modules for libvirtd
2083 - storage backend: Add RBD (RADOS Block Device) support
2084 - sVirt support for LXC domains inprovement
2085 - a lot of bug fixes, improvements and portability work
2087 * Mon May 14 2012 Daniel Veillard <veillard@redhat.com> - 0.9.12-1
2088 - qemu: allow snapshotting of sheepdog and rbd disks
2089 - blockjob: add new APIs
2090 - a lot of bug fixes, improvements and portability work
2092 * Tue Apr 3 2012 Daniel Veillard <veillard@redhat.com> - 0.9.11-1
2093 - Add support for the suspend event
2094 - Add support for event tray moved of removable disks
2095 - qemu: Support numad
2096 - cpustats: API, improvements and qemu support
2097 - qemu: support type='hostdev' network devices at domain start
2098 - Introduce virDomainPMWakeup API
2099 - network: support Open vSwitch
2100 - a number of snapshot improvements
2101 - many improvements and bug fixes
2103 * Mon Feb 13 2012 Daniel Veillard <veillard@redhat.com> - 0.9.10-1
2104 - Add support for sVirt in the LXC driver
2105 - block rebase: add new API virDomainBlockRebase
2106 - API: Add api to set and get domain metadata
2107 - virDomainGetDiskErrors public API
2108 - conf: add rawio attribute to disk element of domain XML
2109 - Add new public API virDomainGetCPUStats()
2110 - Introduce virDomainPMSuspendForDuration API
2111 - resize: add virStorageVolResize() API
2112 - Add a virt-host-validate command to sanity check HV config
2113 - Add new virDomainShutdownFlags API
2114 - QEMU guest agent support
2115 - many improvements and bug fixes
2117 * Sat Jan 7 2012 Daniel Veillard <veillard@redhat.com> - 0.9.9-1
2118 - Add API virDomain{S,G}etInterfaceParameters
2119 - Add API virDomain{G, S}etNumaParameters
2120 - Add support for ppc64 qemu
2121 - Support Xen domctl v8
2122 - many improvements and bug fixes
2124 * Thu Dec 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.8-1
2125 - Add support for QEMU 1.0
2126 - Add preliminary PPC cpu driver
2127 - Add new API virDomain{Set, Get}BlockIoTune
2128 - block_resize: Define the new API
2129 - Add a public API to invoke suspend/resume on the host
2130 - various improvements for LXC containers
2131 - Define keepalive protocol and add virConnectIsAlive API
2132 - Add support for STP and VLAN filtering
2133 - many improvements and bug fixes
2135 * Tue Nov 8 2011 Daniel Veillard <veillard@redhat.com> - 0.9.7-1
2136 - esx: support vSphere 5.x
2137 - vbox: support for VirtualBox 4.1
2138 - Introduce the virDomainOpenGraphics API
2139 - Add AHCI support to qemu driver
2140 - snapshot: many improvements and 2 new APIs
2141 - api: Add public api for 'reset'
2142 - many improvements and bug fixes
2144 * Thu Sep 22 2011 Daniel Veillard <veillard@redhat.com> - 0.9.6-1
2145 - Fix the qemu reboot bug and a few others bug fixes
2147 * Tue Sep 20 2011 Daniel Veillard <veillard@redhat.com> - 0.9.5-1
2148 - many snapshot improvements (Eric Blake)
2149 - latency: Define new public API and structure (Osier Yang)
2150 - USB2 and various USB improvements (Marc-André Lureau)
2151 - storage: Add fs pool formatting (Osier Yang)
2152 - Add public API for getting migration speed (Jim Fehlig)
2153 - Add basic driver for Microsoft Hyper-V (Matthias Bolte)
2154 - many improvements and bug fixes
2156 * Wed Aug 3 2011 Daniel Veillard <veillard@redhat.com> - 0.9.4-1
2157 - network bandwidth QoS control
2158 - Add new API virDomainBlockPull*
2159 - save: new API to manipulate save file images
2160 - CPU bandwidth limits support
2161 - allow to send NMI and key event to guests
2162 - new API virDomainUndefineFlags
2163 - Implement code to attach to external QEMU instances
2164 - bios: Add support for SGA
2165 - various missing python binding
2166 - many improvements and bug fixes
2168 * Mon Jul 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.3-1
2169 - new API virDomainGetVcpupinInfo
2170 - Add TXT record support for virtual DNS service
2171 - Support reboots with the QEMU driver
2172 - New API virDomainGetControlInfo API
2173 - New API virNodeGetMemoryStats
2174 - New API virNodeGetCPUTime
2175 - New API for send-key
2176 - New API virDomainPinVcpuFlags
2177 - support multifunction PCI device
2178 - lxc: various improvements
2179 - many improvements and bug fixes
2181 * Mon Jun 6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
2182 - Framework for lock manager plugins
2183 - API for network config change transactions
2184 - flags for setting memory parameters
2185 - virDomainGetState public API
2186 - qemu: allow blkstat/blkinfo calls during migration
2187 - Introduce migration v3 API
2188 - Defining the Screenshot public API
2189 - public API for NMI injection
2190 - Various improvements and bug fixes
2192 * Thu May 5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
2193 - support various persistent domain updates
2194 - improvements on memory APIs
2195 - Add virDomainEventRebootNew
2196 - various improvements to libxl driver
2197 - Spice: support audio, images and stream compression
2198 - Various improvements and bug fixes
2200 * Mon Apr 4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
2201 - Support cputune cpu usage tuning
2202 - Add public APIs for storage volume upload/download
2203 - Add public API for setting migration speed on the fly
2204 - Add libxenlight driver
2205 - qemu: support migration to fd
2206 - libvirt: add virDomain{Get,Set}BlkioParameters
2207 - setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
2208 - Expose event loop implementation as a public API
2209 - Dump the debug buffer to libvirtd.log on fatal signal
2211 - Various improvements and bug fixes
2213 * Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
2214 - expose new API for sysinfo extraction
2215 - cgroup blkio weight support
2216 - smartcard device support
2217 - qemu: Support per-device boot ordering
2218 - Various improvements and bug fixes
2220 * Tue Jan 4 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
2221 - Preliminary support for VirtualBox 4.0
2223 - Add VMware Workstation and Player driver driver
2224 - Add network disk support
2225 - Various improvements and bug fixes
2227 * Tue Nov 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.6-1
2228 - Add support for iSCSI target auto-discovery
2229 - QED: Basic support for QED images
2230 - remote console support
2231 - support for SPICE graphics
2232 - sysinfo and VMBIOS support
2233 - virsh qemu-monitor-command
2234 - various improvements and bug fixes
2236 * Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
2237 - Enable JSON and netdev features in QEMU >= 0.13
2238 - framework for auditing integration
2239 - framework DTrace/SystemTap integration
2240 - Setting the number of vcpu at boot
2241 - Enable support for nested SVM
2242 - Virtio plan9fs filesystem QEMU
2243 - Memory parameter controls
2244 - various improvements and bug fixes
2246 * Fri Sep 10 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
2247 - big improvements to UML driver
2248 - various improvements and bug fixes
2250 * Wed Aug 4 2010 Daniel Veillard <veillard@redhat.com> - 0.8.3-1
2251 - esx: Support vSphere 4.1
2252 - Qemu arbitrary monitor commands
2253 - Qemu Monitor API entry point
2254 - various improvements and bug fixes
2256 * Mon Jul 5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
2257 - phyp: adding support for IVM
2258 - libvirt: introduce domainCreateWithFlags API
2259 - add 802.1Qbh and 802.1Qbg switches handling
2260 - Support for VirtualBox version 3.2
2261 - Init script for handling guests on shutdown/boot
2262 - qemu: live migration with non-shared storage for kvm
2264 * Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
2265 - Starts dnsmasq from libvirtd with --dhcp-hostsfile
2266 - Add virDomainGetBlockInfo API to query disk sizing
2267 - a lot of bug fixes and cleanups
2269 * Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
2270 - Snapshotting support (QEmu/VBox/ESX)
2271 - Network filtering API
2273 - new APIs for domain events
2274 - Libvirt managed save API
2275 - timer subselection for domain clock
2277 - API to update guest CPU to host CPU
2278 - virDomainUpdateDeviceFlags new API
2279 - migrate max downtime API
2281 - and many bug fixes
2283 * Fri Mar 5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
2285 - async job handling
2287 - computing baseline CPU
2288 - virDomain{Attach,Detach}DeviceFlags
2289 - assorted bug fixes and lots of cleanups
2291 * Wed Feb 3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1
2293 * Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
2294 - Add new API virDomainMemoryStats
2295 - Public API and domain extension for CPU flags
2296 - vbox: Add support for version 3.1
2297 - Support QEMU's virtual FAT block device driver
2300 * Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.3-1
2301 - udev node device backend
2302 - API to check object properties
2303 - better QEmu monitor processing
2304 - MAC address based port filtering for qemu
2305 - support IPv6 and multiple addresses per interfaces
2308 * Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
2309 - ESX, VBox driver updates
2311 - support for encrypted (qcow) volume
2312 - compressed save image format for Qemu/KVM
2313 - QEmu host PCI device hotplug support
2314 - configuration of huge pages in guests
2317 * Wed Aug 5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
2318 - ESX, VBox3, Power Hypervisor drivers
2319 - new net filesystem glusterfs
2320 - Storage cloning for LVM and Disk backends
2321 - interface implementation based on netcf
2322 - Support cgroups in QEMU driver
2323 - QEmu hotplug NIC support
2326 * Fri Jul 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
2329 * Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
2333 * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
2337 * Fri Apr 3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
2340 * Fri Mar 4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
2343 * Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
2346 * Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
2349 * Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
2352 * Mon Sep 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
2355 * Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
2357 - mostly a few bug fixes from 0.4.3
2359 * Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
2361 - lots of bug fixes and small improvements
2363 * Tue Apr 8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
2365 - lots of bug fixes and small improvements
2367 * Mon Mar 3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
2371 - lots of assorted improvements, bugfixes and cleanups
2372 - documentation and localization improvements
2374 * Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
2376 - SASL based authentication
2377 - PolicyKit authentication
2378 - improved NUMA and statistics support
2379 - lots of assorted improvements, bugfixes and cleanups
2380 - documentation and localization improvements
2382 * Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
2386 - lots of assorted improvements, bugfixes and cleanups
2387 - documentation and localization improvements
2389 * Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
2391 - API for domains migration
2392 - APIs for collecting statistics on disks and interfaces
2393 - lots of assorted bugfixes and cleanups
2394 - documentation and localization improvements
2396 * Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
2398 - localtime clock support
2399 - PS/2 and USB input devices
2400 - lots of assorted bugfixes and cleanups
2401 - documentation and localization improvements
2403 * Mon Jul 9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
2405 - Secure remote access support
2406 - unification of daemons
2407 - lots of assorted bugfixes and cleanups
2408 - documentation and localization improvements
2410 * Fri Jun 8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
2412 - lot of assorted bugfixes and cleanups
2413 - support for Xen-3.1
2416 * Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
2418 - lot of assorted bugfixes and cleanups
2419 - preparing for Xen-3.0.5
2421 * Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
2422 - don't require xen; we don't need the daemon and can control non-xen now
2423 - fix scriptlet error (need to own more directories)
2424 - update description text
2426 * Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
2428 - lot of bug and portability fixes
2429 - Add support for network autostart and init scripts
2430 - New API to detect the virtualization capabilities of a host
2431 - Documentation updates
2433 * Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
2434 - Fix loading of guest & network configs
2436 * Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
2437 - Disable kqemu support since its not in Fedora qemu binary
2438 - Fix for -vnc arg syntax change in 0.9.0 QEMU
2440 * Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
2441 - Fixed path to qemu daemon for autostart
2442 - Fixed generation of <features> block in XML
2443 - Pre-create config directory at startup
2445 * Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
2446 - support for KVM and QEmu
2447 - support for network configuration
2450 * Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
2451 - finish inactive Xen domains support
2453 - RelaxNG schemas for XML configs
2455 * Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
2456 - support for inactive Xen domains
2457 - improved support for Xen display and vnc
2459 - localization updates
2461 * Thu Dec 7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
2462 - rebuild against python 2.5
2464 * Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
2465 - better error reporting
2466 - python bindings fixes and extensions
2467 - add support for shareable drives
2468 - add support for non-bridge style networking
2469 - hot plug device support
2470 - added support for inactive domains
2471 - API to dump core of domains
2472 - various bug fixes, cleanups and improvements
2473 - updated the localization
2475 * Tue Nov 7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
2476 - it's pkgconfig not pgkconfig !
2478 * Mon Nov 6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
2479 - fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
2480 - Resolves: rhbz#202320
2482 * Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
2483 - fix missing page size detection code for ia64
2484 - fix mlock size when getting domain info list from hypervisor
2485 - vcpu number initialization
2486 - don't label crashed domains as shut off
2487 - fix virsh man page
2488 - blktapdd support for alternate drivers like blktap
2489 - memory leak fixes (xend interface and XML parsing)
2491 - mlock/munlock size fixes
2493 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
2494 - Fix bug when running against xen-3.0.3 hypercalls
2495 - Fix memory bug when getting vcpus info from xend
2497 * Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
2498 - Support for localization
2499 - Support for new Xen-3.0.3 cdrom and disk configuration
2500 - Support for setting VNC port
2501 - Fix bug when running against xen-3.0.2 hypercalls
2502 - Fix reconnection problem when talking directly to http xend
2504 * Tue Sep 5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
2505 - patch from danpb to support new-format cd devices for HVM guests
2507 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
2508 - reactivating ia64 support
2510 * Tue Sep 5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
2513 - support for new hypervisor calls
2514 - early code for config files and defined domains
2516 * Mon Sep 4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
2517 - add patch to address dom0_ops API breakage in Xen 3.0.3 tree
2519 * Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
2520 - add patch to support paravirt framebuffer in Xen
2522 * Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
2523 - another patch to fix network handling in non-HVM guests
2525 * Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
2526 - patch to fix virParseUUID()
2528 * Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
2529 - vCPUs and affinity support
2530 - more complete XML, console and boot options
2531 - specific features support
2532 - enforced read-only connections
2533 - various improvements, bug fixes
2535 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
2536 - add patch from pvetere to allow getting uuid from libvirt
2538 * Wed Aug 2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
2541 * Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
2542 - don't BR xen, we just need xen-devel
2544 * Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
2545 - need rebuild since libxenstore is now versionned
2547 * Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
2548 - Add BuildRequires: xen-devel
2550 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
2553 * Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
2554 - support for HVM Xen guests
2557 * Mon Jul 3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
2558 - added a proxy mechanism for read only access using httpu
2559 - fixed header includes paths
2561 * Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
2562 - extend and cleanup the driver infrastructure and code
2564 - extend uuid support
2565 - bug fixes, buffer handling cleanups
2566 - support for new Xen hypervisor API
2567 - test driver for unit testing
2568 - virsh --conect argument
2570 * Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
2572 - new APIs: for Node information and Reboot
2573 - virsh improvements and extensions
2574 - documentation updates and man page
2575 - enhancement and fixes of the XML description format
2577 * Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
2578 - added error handling APIs
2580 - improve python bindings
2581 - augment documentation and regression tests
2583 * Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
2584 - new domain creation API
2585 - new UUID based APIs
2586 - more tests, documentation, devhelp
2589 * Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
2590 - fixes some problems in 0.0.3 due to the change of names
2592 * Wed Feb 8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
2593 - changed library name to libvirt from libvir, complete and test the python
2596 * Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
2597 - upstream release of 0.0.2, use xend, save and restore added, python bindings
2600 * Wed Nov 2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1