# -*- rpm-spec -*-
-%define mainstream_version 1.2.5
+%define mainstream_version 1.2.11
%define module_version_varname mainstream_version
%define taglevel 1
%define packager PlanetLab/OneLab
%define enable_autotools 1
+# This spec file assumes you are building for Fedora 13 or newer,
+# or for RHEL 5 or newer. It may need some tweaks for other distros.
# If neither fedora nor rhel was defined, try to guess them from %{dist}
%if !0%{?rhel} && !0%{?fedora}
%{expand:%(echo "%{?dist}" | \
%define with_vbox 0%{!?_without_vbox:%{server_drivers}}
%define with_qemu_tcg %{with_qemu}
-# Change if we ever provide qemu-kvm binaries on non-x86 hosts
-%if 0%{?fedora} >= 18
+%define qemu_kvm_arches %{ix86} x86_64
+
+%if 0%{?fedora}
+ %if 0%{?fedora} < 16
+ # Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
+ # I think F17 is the first release with the power64 macro
+ %ifarch ppc64
+ %define with_qemu_tcg 0
+ %endif
+ %endif
+ %if 0%{?fedora} >= 18
+ %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x
+ %endif
%if 0%{?fedora} >= 20
- %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x %{arm}
- %else
- %define qemu_kvm_arches %{ix86} x86_64 ppc64 s390x
+ %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64
%endif
-%else
- %define qemu_kvm_arches %{ix86} x86_64
+%endif
+
+%if 0%{?rhel}
+ %define with_qemu_tcg 0
+ %define qemu_kvm_arches x86_64
%endif
%ifarch %{qemu_kvm_arches}
%define with_qemu_kvm 0
%endif
+%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}
+ %define with_qemu 0
+%endif
+
# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
%define with_openvz 0%{!?_without_openvz:1}
%define with_vmware 0%{!?_without_vmware:1}
%define with_libpcap 0%{!?_without_libpcap:0}
%define with_macvtap 0%{!?_without_macvtap:0}
%define with_libnl 0%{!?_without_libnl:0}
-%define with_audit 0%{!?_without_audit:0}
%define with_dtrace 0%{!?_without_dtrace:0}
%define with_cgconfig 0%{!?_without_cgconfig:0}
%define with_sanlock 0%{!?_without_sanlock:0}
# Non-server/HV driver defaults which are always enabled
%define with_sasl 0%{!?_without_sasl:1}
+%define with_audit 0%{!?_without_audit:1}
# Finally set the OS / architecture specific special cases
%define with_firewalld 1
%endif
-# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
+# RHEL-5 is too old for LXC
%if 0%{?rhel} == 5
- %define with_qemu_tcg 0
- %ifnarch x86_64
- %define with_qemu 0
- %define with_qemu_kvm 0
- %endif
%define with_lxc 0
%endif
-# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
-# on all archs. Other archs all have LXC available though
+# RHEL-6 stopped including Xen on all archs.
%if 0%{?rhel} >= 6
- %define with_qemu_tcg 0
- %ifnarch x86_64
- %define with_qemu 0
- %define with_qemu_kvm 0
- %endif
%define with_xen 0
%endif
-# Fedora doesn't have any QEMU on ppc64 until FC16 - only ppc
-%if 0%{?fedora} && 0%{?fedora} < 16
- %ifarch ppc64
- %define with_qemu 0
- %endif
-%endif
-
# Fedora doesn't have new enough Xen for libxl until F18
%if 0%{?fedora} && 0%{?fedora} < 18
%define with_libxl 0
%endif
-# PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
-%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
- %define with_polkit 0%{!?_without_polkit:1}
-%endif
-
-# libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
- %define with_capng 0%{!?_without_capng:1}
-%endif
-
# fuse is used to provide virtualized /proc for LXC
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7
%define with_fuse 0%{!?_without_fuse:1}
%endif
-# netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
- %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
-%endif
-
-# udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
- %define with_udev 0%{!?_without_udev:%{server_drivers}}
-%else
+# RHEL 5 lacks newer tools
+%if 0%{?rhel} == 5
%define with_hal 0%{!?_without_hal:%{server_drivers}}
+%else
+ %define with_polkit 0%{!?_without_polkit:1}
+ %define with_capng 0%{!?_without_capng:1}
+ %define with_netcf 0%{!?_without_netcf:%{server_drivers}}
+ %define with_udev 0%{!?_without_udev:%{server_drivers}}
+ %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
+ %define with_dtrace 1
%endif
# interface requires netcf
%define with_interface 0
%endif
-# Enable yajl library for JSON mode with QEMU
-%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
- %define with_yajl 0%{!?_without_yajl:%{server_drivers}}
-%endif
-
# Enable sanlock library for lock management with QEMU
-# Sanlock is available only on i686 x86_64 for RHEL
%if 0%{?fedora} >= 16
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%if 0%{?rhel} == 6
- %ifarch %{ix86} x86_64
+ %ifarch %{qemu_kvm_arches}
%define with_sanlock 0%{!?_without_sanlock:%{server_drivers}}
%endif
%endif
%define with_libnl 1
%endif
-%if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
- %define with_audit 0%{!?_without_audit:1}
-%endif
-
-%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
- %define with_dtrace 1
-%endif
-
# Pull in cgroups config system
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+%if 0%{?fedora} || 0%{?rhel} >= 6
%if %{with_qemu} || %{with_lxc}
%define with_cgconfig 0%{!?_without_cgconfig:1}
%endif
# Force QEMU to run as non-root
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+%if 0%{?fedora} || 0%{?rhel} >= 6
%define qemu_user qemu
%define qemu_group qemu
%else
BuildRequires: libtool
BuildRequires: /usr/bin/pod2man
%endif
+BuildRequires: git
+BuildRequires: perl
BuildRequires: python
%if %{with_systemd}
BuildRequires: systemd-units
# For pool-build probing for existing pools
BuildRequires: libblkid-devel >= 2.17
%endif
-%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+%if 0%{?fedora} || 0%{?rhel} >= 6
# for augparse, optionally used in testing
BuildRequires: augeas
%endif
%if %{with_network}
BuildRequires: dnsmasq >= 2.41
BuildRequires: iptables
+ %if (0%{?fedora} && 0%{?fedora} < 17) || (0%{?rhel} && 0%{?rhel} < 7)
BuildRequires: iptables-ipv6
+ %endif
BuildRequires: radvd
%endif
%if %{with_nwfilter}
BuildRequires: cyrus-sasl-devel
%endif
%if %{with_polkit}
- %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
-BuildRequires: polkit-devel >= 0.93
+ %if 0%{?fedora} >= 20 || 0%{?rhel} >= 7
+BuildRequires: polkit-devel >= 0.112
%else
+ %if 0%{?fedora} || 0%{?rhel} >= 6
+BuildRequires: polkit-devel >= 0.93
+ %else
BuildRequires: PolicyKit-devel >= 0.6
+ %endif
%endif
%endif
%if %{with_storage_fs}
%endif
%endif
%if %{with_esx}
- %if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
+ %if 0%{?fedora} || 0%{?rhel} >= 6
BuildRequires: libcurl-devel
%else
BuildRequires: curl-devel
%endif
%endif
%if %{with_polkit}
- %if 0%{?fedora} >= 12 || 0%{?rhel} >=6
-Requires: polkit >= 0.93
+ %if 0%{?fedora} >= 20 || 0%{?rhel} >= 7
+Requires: polkit >= 0.112
%else
+ %if 0%{?fedora} || 0%{?rhel} >=6
+Requires: polkit >= 0.93
+ %else
Requires: PolicyKit >= 0.6
+ %endif
%endif
%endif
%if %{with_cgconfig}
Requires: dnsmasq >= 2.41
Requires: radvd
Requires: iptables
+ %if (0%{?fedora} && 0%{?fedora} < 17) || (0%{?rhel} && 0%{?rhel} < 7)
Requires: iptables-ipv6
+ %endif
%description daemon-driver-network
The network driver plugin for the libvirtd daemon, providing
Group: Development/Libraries
Requires: libvirt-daemon = %{version}-%{release}
Requires: iptables
+ %if (0%{?fedora} && 0%{?fedora} < 17) || (0%{?rhel} && 0%{?rhel} < 7)
Requires: iptables-ipv6
+ %endif
Requires: ebtables
%description daemon-driver-nwfilter
# For mkfs
Requires: util-linux
# For glusterfs
- %if 0%{?fedora} >= 11
+ %if 0%{?fedora}
Requires: glusterfs-client >= 2.0.1
%endif
%endif
%prep
%setup -q
+# Patches have to be stored in a temporary file because RPM has
+# a limit on the length of the result of any macro expansion;
+# if the string is longer, it's silently cropped
+%{lua:
+ tmp = os.tmpname();
+ f = io.open(tmp, "w+");
+ count = 0;
+ for i, p in ipairs(patches) do
+ f:write(p.."\n");
+ count = count + 1;
+ end;
+ f:close();
+ print("PATCHCOUNT="..count.."\n")
+ print("PATCHLIST="..tmp.."\n")
+}
+
+git init -q
+git config user.name rpm-build
+git config user.email rpm-build
+git config gc.auto 0
+git add .
+git commit -q -a --author 'rpm-build <rpm-build>' \
+ -m '%{name}-%{version} base'
+
+COUNT=$(grep '\.patch$' $PATCHLIST | wc -l)
+if [ $COUNT -ne $PATCHCOUNT ]; then
+ echo "Found $COUNT patches in $PATCHLIST, expected $PATCHCOUNT"
+ exit 1
+fi
+if [ $COUNT -gt 0 ]; then
+ xargs git am <$PATCHLIST || exit 1
+fi
+echo "Applied $COUNT patches"
+rm -f $PATCHLIST
+
%build
%if ! %{with_xen}
%define _without_xen --without-xen
# on RHEL 5, thus we need to expand it here.
make install DESTDIR=%{?buildroot} SYSTEMD_UNIT_DIR=%{_unitdir}
-for i in object-events dominfo domsuspend hellolibvirt openauth xml/nwfilter systemtap dommigrate
+for i in object-events dominfo domsuspend hellolibvirt openauth xml/nwfilter systemtap dommigrate domtop
do
(cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
done
%endif
%endif
-%if 0%{?fedora} < 14 && 0%{?rhel} < 6
+%if 0%{?rhel} == 5
rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
%endif
%if ! %{with_driver_modules}
%if %{with_qemu}
%pre daemon
- %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+ %if 0%{?fedora} || 0%{?rhel} >= 6
# We want soft static allocation of well-known ids, as disk images
# are commonly shared across NFS mounts by id rather than name; see
# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
%post daemon
- %if %{with_network}
-# All newly defined networks will have a mac address for the bridge
-# auto-generated, but networks already existing at the time of upgrade
-# will not. We need to go through all the network configs, look for
-# those that don't have a mac address, and add one.
-
-network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
- grep -L "mac address" *.xml; \
- cd %{_sysconfdir}/libvirt/qemu/networks && \
- grep -L "mac address" *.xml) 2>/dev/null \
- | sort -u)
-
-for file in $network_files
-do
- # each file exists in either the config or state directory (or both) and
- # does not have a mac address specified in either. We add the same mac
- # address to both files (or just one, if the other isn't there)
-
- mac4=`printf '%X' $(($RANDOM % 256))`
- mac5=`printf '%X' $(($RANDOM % 256))`
- mac6=`printf '%X' $(($RANDOM % 256))`
- for dir in %{_localstatedir}/lib/libvirt/network \
- %{_sysconfdir}/libvirt/qemu/networks
- do
- if test -f $dir/$file
- then
- sed -i.orig -e \
- "s|\(<bridge.*$\)|\0\n <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
- $dir/$file
- if test $? != 0
- then
- echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
- "to $dir/$file"
- mv -f $dir/$file.orig $dir/$file
- else
- rm -f $dir/$file.orig
- fi
- fi
- done
-done
- %endif
-
%if %{with_systemd}
%if %{with_systemd_macros}
- %systemd_post virtlockd.socket libvirtd.service
+ %systemd_post virtlockd.socket libvirtd.service libvirtd.socket
%else
if [ $1 -eq 1 ] ; then
# Initial installation
- /bin/systemctl enable virtlockd.socket libvirtd.service >/dev/null 2>&1 || :
+ /bin/systemctl enable \
+ virtlockd.socket \
+ libvirtd.service >/dev/null 2>&1 || :
fi
%endif
%else
%preun daemon
%if %{with_systemd}
%if %{with_systemd_macros}
- %systemd_preun libvirtd.service virtlockd.socket virtlockd.service
+ %systemd_preun libvirtd.socket libvirtd.service virtlockd.socket virtlockd.service
%else
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
- /bin/systemctl --no-reload disable libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
- /bin/systemctl stop libvirtd.service virtlockd.socket virtlockd.service > /dev/null 2>&1 || :
+ /bin/systemctl --no-reload disable \
+ libvirtd.socket \
+ libvirtd.service \
+ virtlockd.socket \
+ virtlockd.service > /dev/null 2>&1 || :
+ /bin/systemctl stop \
+ libvirtd.socket \
+ libvirtd.service \
+ virtlockd.socket \
+ virtlockd.service > /dev/null 2>&1 || :
fi
%endif
%else
%if %{with_network}
%post daemon-config-network
if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
+ # see if the network used by default network creates a conflict,
+ # and try to resolve it
+ # NB: 192.168.122.0/24 is used in the default.xml template file;
+ # do not modify any of those values here without also modifying
+ # them in the template.
+ orig_sub=122
+ sub=${orig_sub}
+ nl='
+'
+ routes="${nl}$(ip route show | cut -d' ' -f1)${nl}"
+ case ${routes} in
+ *"${nl}192.168.${orig_sub}.0/24${nl}"*)
+ # there was a match, so we need to look for an unused subnet
+ for new_sub in $(seq 124 254); do
+ case ${routes} in
+ *"${nl}192.168.${new_sub}.0/24${nl}"*)
+ ;;
+ *)
+ sub=$new_sub
+ break;
+ ;;
+ esac
+ done
+ ;;
+ *)
+ ;;
+ esac
+
UUID=`/usr/bin/uuidgen`
- sed -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
+ sed -e "s/${orig_sub}/${sub}/g" \
+ -e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
< %{_datadir}/libvirt/networks/default.xml \
> %{_sysconfdir}/libvirt/qemu/networks/default.xml
ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
%if %{with_driver_modules}
%if %{with_qemu}
%pre daemon-driver-qemu
- %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+ %if 0%{?fedora} || 0%{?rhel} >= 6
# We want soft static allocation of well-known ids, as disk images
# are commonly shared across NFS mounts by id rather than name; see
# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
%if %{with_systemd}
%{_unitdir}/libvirtd.service
+%{_unitdir}/libvirtd.socket
%{_unitdir}/virtlockd.service
%{_unitdir}/virtlockd.socket
%else
%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
- %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
+ %if 0%{?fedora} || 0%{?rhel} >= 6
%config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
%endif
#%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
%if %{with_polkit}
- %if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
+ %if 0%{?fedora} || 0%{?rhel} >= 6
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
%{_datadir}/polkit-1/actions/org.libvirt.api.policy
%else
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
+%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
%endif
%if %{with_nwfilter}
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
+%dir %attr(0711, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/nvram/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%ghost %dir %{_localstatedir}/run/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
+%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
%endif
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/
+%dir %attr(0711, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/nvram/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
%files daemon-driver-vbox
%defattr(-, root, root)
%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
+%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox_network.so
+%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox_storage.so
%endif
%endif # %{with_driver_modules}
%{_bindir}/virt-xml-validate
%{_bindir}/virt-pki-validate
%{_bindir}/virt-host-validate
-%{_libdir}/lib*.so.*
+%{_libdir}/libvirt.so.*
+%{_libdir}/libvirt-qemu.so.*
+%{_libdir}/libvirt-lxc.so.*
%if %{with_dtrace}
%{_datadir}/systemtap/tapset/libvirt_probes*.stp
%{_datadir}/libvirt/schemas/basictypes.rng
%{_datadir}/libvirt/schemas/capability.rng
%{_datadir}/libvirt/schemas/domain.rng
+%{_datadir}/libvirt/schemas/domaincaps.rng
%{_datadir}/libvirt/schemas/domaincommon.rng
%{_datadir}/libvirt/schemas/domainsnapshot.rng
%{_datadir}/libvirt/schemas/interface.rng
%files devel
%defattr(-, root, root)
-%{_libdir}/lib*.so
+%{_libdir}/libvirt.so
+%{_libdir}/libvirt-qemu.so
+%{_libdir}/libvirt-lxc.so
%dir %{_includedir}/libvirt
-%{_includedir}/libvirt/*.h
+%{_includedir}/libvirt/virterror.h
+%{_includedir}/libvirt/libvirt.h
+%{_includedir}/libvirt/libvirt-domain.h
+%{_includedir}/libvirt/libvirt-domain-snapshot.h
+%{_includedir}/libvirt/libvirt-event.h
+%{_includedir}/libvirt/libvirt-host.h
+%{_includedir}/libvirt/libvirt-interface.h
+%{_includedir}/libvirt/libvirt-network.h
+%{_includedir}/libvirt/libvirt-nodedev.h
+%{_includedir}/libvirt/libvirt-nwfilter.h
+%{_includedir}/libvirt/libvirt-secret.h
+%{_includedir}/libvirt/libvirt-storage.h
+%{_includedir}/libvirt/libvirt-stream.h
+%{_includedir}/libvirt/libvirt-qemu.h
+%{_includedir}/libvirt/libvirt-lxc.h
%{_libdir}/pkgconfig/libvirt.pc
+%{_libdir}/pkgconfig/libvirt-qemu.pc
+%{_libdir}/pkgconfig/libvirt-lxc.pc
%dir %{_datadir}/libvirt/api/
%{_datadir}/libvirt/api/libvirt-api.xml
%doc examples/systemtap
%changelog
+* Sat Dec 13 2014 Daniel Veillard <veillard@redhat.com> - 1.2.11-1
+- CVE-2014-8131: Fix possible deadlock and segfault in qemuConnectGetAllDomainStats()
+- CVE-2014-7823: dumpxml: security hole with migratable flag
+- Implement public API for virDomainGetFSInfo
+- Add define support for the new throttle options
+- a number of improvements and bug fixes
+
+* Mon Nov 3 2014 Daniel Veillard <veillard@redhat.com> - 1.2.10-1
+- vbox: various drivers improvements
+- libxl: various drivers improvements
+- Internal driver refactoring
+- a number of improvements and bug fixes
+
+* Wed Oct 1 2014 Daniel Veillard <veillard@redhat.com> - 1.2.9-1
+- CVE-2014-3657: domain_conf: fix domain deadlock
+- CVE-2014-3633: qemu: blkiotune: Use correct definition when looking up disk
+- Introduce virNodeAllocPages
+- event: introduce new event for tunable values
+- add migration support for OpenVZ driver
+- Add support for fetching statistics of completed jobs
+- many improvements and bug fixes
+
+* Tue Sep 2 2014 Daniel Veillard <veillard@redhat.com> - 1.2.8-1
+- blockcopy: virDomainBlockCopy with XML destination, typed params
+- Introduce API for retrieving bulk domain stats
+- Introduce virDomainOpenGraphicsFD API
+- storage: ZFS support
+- many improvements and bug fixes
+
+* Sun Aug 3 2014 Daniel Veillard <veillard@redhat.com> - 1.2.7-1
+- Introduce virConnectGetDomainCapabilities
+- many improvements and bug fixes
+
+* Wed Jul 2 2014 Daniel Veillard <veillard@redhat.com> - 1.2.6-1
+- libxl: add migration support and fixes
+- various improvements and fixes for NUMA
+- many improvements and bug fixes
+
* Wed Jul 16 2014 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - libvirt-1.2.5-1
- libvirt 1.2.5 for PL
+* Mon Jun 2 2014 Daniel Veillard <veillard@redhat.com> - 1.2.5-1
+- LSN-2014-0003: Don't expand entities when parsing XML (security)
+- Introduce virDomain{Get,Set}Time APIs
+- Introduce virDomainFSFreeze() and virDomainFSThaw() public API
+- various improvements and bug fixes
+
* Mon Jun 02 2014 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - libvirt-1.2.4-1
- complete build for 1.2.4, works fine on f18, still has an issue with f20 for slice re-creation
git://git.onelab.eu / libvirt.git / commitdiff