vserver 2.0 rc7

[linux-2.6.git] / Documentation / DocBook / mtdnand.tmpl

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 435bb52..6e463d0 100644 (file)
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1,4 +1,6 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[]>
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+       "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <book id="MTD-NAND-Guide">
  <bookinfo>
@@ -238,9 +240,9 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
        struct nand_chip *this = (struct nand_chip *) mtd->priv;
        switch(cmd){
                case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT;  break;
-               case NAND_CTL_CLRCLE: this->IO_ADDR_W &= ~CLE_ADRR_BIT; break;
+               case NAND_CTL_CLRCLE: this->IO_ADDR_W &amp;= ~CLE_ADRR_BIT; break;
                case NAND_CTL_SETALE: this->IO_ADDR_W |= ALE_ADRR_BIT;  break;
-               case NAND_CTL_CLRALE: this->IO_ADDR_W &= ~ALE_ADRR_BIT; break;
+               case NAND_CTL_CLRALE: this->IO_ADDR_W &amp;= ~ALE_ADRR_BIT; break;
        }
 }
                </programlisting>
@@ -391,7 +393,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
        /* Deselect all chips, set all nCE pins high */
        GPIO(BOARD_NAND_NCE) |= 0xff;   
        if (chip >= 0)
-               GPIO(BOARD_NAND_NCE) &= ~ (1 << chip);  
+               GPIO(BOARD_NAND_NCE) &amp;= ~ (1 &lt;&lt; chip);
 }
                </programlisting>
                <para>
@@ -405,8 +407,8 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
        struct nand_chip *this = (struct nand_chip *) mtd->priv;
        
        /* Deselect all chips */
-       this->IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK;
-       this->IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK;
+       this->IO_ADDR_R &amp;= ~BOARD_NAND_ADDR_MASK;
+       this->IO_ADDR_W &amp;= ~BOARD_NAND_ADDR_MASK;
        switch (chip) {
        case 0:
                this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0;