---------------------------
+What: /sys/devices/.../power/state
+ dev->power.power_state
+ dpm_runtime_{suspend,resume)()
+When: July 2007
+Why: Broken design for runtime control over driver power states, confusing
+ driver-internal runtime power management with: mechanisms to support
+ system-wide sleep state transitions; event codes that distinguish
+ different phases of swsusp "sleep" transitions; and userspace policy
+ inputs. This framework was never widely used, and most attempts to
+ use it were broken. Drivers should instead be exposing domain-specific
+ interfaces either to kernel or to userspace.
+Who: Pavel Machek <pavel@suse.cz>
+
+---------------------------
+
What: RAW driver (CONFIG_RAW_DRIVER)
When: December 2005
Why: declared obsolete since kernel 2.6.3
---------------------------
-What: drivers that were depending on OBSOLETE_OSS_DRIVER
- (config options already removed)
-When: before 2.6.19
-Why: OSS drivers with ALSA replacements
-Who: Adrian Bunk <bunk@stusta.de>
+What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When: June 2007
+Why: Deprecated in favour of the more efficient and robust rawiso interface.
+ Affected are applications which use the deprecated part of libraw1394
+ (raw1394_iso_write, raw1394_start_iso_write, raw1394_start_iso_rcv,
+ raw1394_stop_iso_rcv) or bypass libraw1394.
+Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
-What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When: November 2006
-Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
- more efficient. You should really be using libraw1394 for raw1394
- access anyway.
-Who: Jody McIntyre <scjody@modernduck.com>
+What: dv1394 driver (CONFIG_IEEE1394_DV1394)
+When: June 2007
+Why: Replaced by raw1394 + userspace libraries, notably libiec61883. This
+ shift of application support has been indicated on www.linux1394.org
+ and developers' mailinglists for quite some time. Major applications
+ have been converted, with the exception of ffmpeg and hence xine.
+ Piped output of dvgrab2 is a partial equivalent to dv1394.
+Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
-What: sbp2: module parameter "force_inquiry_hack"
-When: July 2006
-Why: Superceded by parameter "workarounds". Both parameters are meant to be
- used ad-hoc and for single devices only, i.e. not in modprobe.conf,
- therefore the impact of this feature replacement should be low.
+What: ieee1394 core's unused exports (CONFIG_IEEE1394_EXPORT_FULL_API)
+When: January 2007
+Why: There are no projects known to use these exported symbols, except
+ dfg1394 (uses one symbol whose functionality is core-internal now).
+Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+---------------------------
+
+What: ieee1394's *_oui sysfs attributes (CONFIG_IEEE1394_OUI_DB)
+When: January 2007
+Files: drivers/ieee1394/: oui.db, oui2c.sh
+Why: big size, little value
Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When: July 2006
+When: December 2006
Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
---------------------------
-What: ip_queue and ip6_queue (old ipv4-only and ipv6-only netfilter queue)
-When: December 2005
-Why: This interface has been obsoleted by the new layer3-independent
- "nfnetlink_queue". The Kernel interface is compatible, so the old
- ip[6]tables "QUEUE" targets still work and will transparently handle
- all packets into nfnetlink queue number 0. Userspace users will have
- to link against API-compatible library on top of libnfnetlink_queue
- instead of the current 'libipq'.
-Who: Harald Welte <laforge@netfilter.org>
-
----------------------------
-
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
---------------------------
-What: START_ARRAY ioctl for md
-When: July 2006
-Files: drivers/md/md.c
-Why: Not reliable by design - can fail when most needed.
- Alternatives exist
-Who: NeilBrown <neilb@suse.de>
-
----------------------------
-
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
---------------------------
-What: I2C interface of the it87 driver
-When: January 2007
-Why: The ISA interface is faster and should be always available. The I2C
- probing is also known to cause trouble in at least one case (see
- bug #5889.)
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
What: USB driver API moves to EXPORT_SYMBOL_GPL
-When: Febuary 2008
+When: February 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
Why: The USB subsystem has changed a lot over time, and it has been
possible to create userspace USB drivers using usbfs/libusb/gadgetfs
---------------------------
-What: Support for the MIPS EV96100 evaluation board
-When: September 2006
-Why: Does no longer build since at least November 15, 2003, apparently
- no userbase left.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: Interrupt only SA_* flags
+When: Januar 2007
+Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
+ out of the signal namespace.
+
+Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: Support for the Momentum / PMC-Sierra Jaguar ATX evaluation board
-When: September 2006
-Why: Does no longer build since quite some time, and was never popular,
- due to the platform being replaced by successor models. Apparently
- no user base left. It also is one of the last users of
- WANT_PAGE_VIRTUAL.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When: October 2008
+Why: The stacking of class devices makes these values misleading and
+ inconsistent.
+ Class devices should not carry any of these properties, and bus
+ devices have SUBSYTEM and DRIVER as a replacement.
+Who: Kay Sievers <kay.sievers@suse.de>
---------------------------
-What: Support for the Momentum Ocelot, Ocelot 3, Ocelot C and Ocelot G
-When: September 2006
-Why: Some do no longer build and apparently there is no user base left
- for these platforms.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: i2c-isa
+When: December 2006
+Why: i2c-isa is a non-sense and doesn't fit in the device driver
+ model. Drivers relying on it are better implemented as platform
+ drivers.
+Who: Jean Delvare <khali@linux-fr.org>
---------------------------
-What: Support for MIPS Technologies' Altas and SEAD evaluation board
-When: September 2006
-Why: Some do no longer build and apparently there is no user base left
- for these platforms. Hardware out of production since several years.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: i2c_adapter.dev
+ i2c_adapter.list
+When: July 2007
+Why: Superfluous, given i2c_adapter.class_dev:
+ * The "dev" was a stand-in for the physical device node that legacy
+ drivers would not have; but now it's almost always present. Any
+ remaining legacy drivers must upgrade (they now trigger warnings).
+ * The "list" duplicates class device children.
+ The delay in removing this is so upgraded lm_sensors and libsensors
+ can get deployed. (Removal causes minor changes in the sysfs layout,
+ notably the location of the adapter type name and parenting the i2c
+ client hardware directly from their controller.)
+Who: Jean Delvare <khali@linux-fr.org>,
+ David Brownell <dbrownell@users.sourceforge.net>
---------------------------
-What: Support for the IT8172-based platforms, ITE 8172G and Globespan IVR
-When: September 2006
-Why: Code does no longer build since at least 2.6.0, apparently there is
- no user base left for these platforms. Hardware out of production
- since several years and hardly a trace of the manufacturer left on
- the net.
-Who: Ralf Baechle <ralf@linux-mips.org>
+What: IPv4 only connection tracking/NAT/helpers
+When: 2.6.22
+Why: The new layer 3 independant connection tracking replaces the old
+ IPv4 only version. After some stabilization of the new code the
+ old one will be removed.
+Who: Patrick McHardy <kaber@trash.net>
---------------------------
-What: Interrupt only SA_* flags
-When: Januar 2007
-Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
- out of the signal namespace.
-
-Who: Thomas Gleixner <tglx@linutronix.de>
+What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
+When: December 2006
+Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
+ functionally very much similar. They talk to ACPI in same way. Only
+ difference between them is the way they do frequency transitions.
+ One uses MSRs and the other one uses IO ports. Functionaliy of
+ speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
+ That means one common driver will support all Intel Enhanced Speedstep
+ capable CPUs. That means less confusion over name of
+ speedstep-centrino driver (with that driver supposed to be used on
+ non-centrino platforms). That means less duplication of code and
+ less maintenance effort and no possibility of these two drivers
+ going out of sync.
+ Current users of speedstep_centrino with ACPI hooks are requested to
+ switch over to acpi-cpufreq driver. speedstep-centrino will continue
+ to work using older non-ACPI static table based scheme even after this
+ date.
+
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
---------------------------
-What: i2c-ite and i2c-algo-ite drivers
-When: September 2006
-Why: These drivers never compiled since they were added to the kernel
- tree 5 years ago. This feature removal can be reevaluated if
- someone shows interest in the drivers, fixes them and takes over
- maintenance.
- http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
-Who: Jean Delvare <khali@linux-fr.org>
+What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
+When: 2.6.21
+Why: hotkey.c was an attempt to consolidate multiple drivers that use
+ ACPI to implement hotkeys. However, hotkeys are not documented
+ in the ACPI specification, so the drivers used undocumented
+ vendor-specific hooks and turned out to be more different than
+ the same.
+
+ Further, the keys and the features supplied by each platform
+ are different, so there will always be a need for
+ platform-specific drivers.
+
+ So the new plan is to delete hotkey.c and instead, work on the
+ platform specific drivers to try to make them look the same
+ to the user when they supply the same features.
+
+ hotkey.c has always depended on CONFIG_EXPERIMENTAL
+
+Who: Len Brown <len.brown@intel.com>
---------------------------
-What: Bridge netfilter deferred IPv4/IPv6 output hook calling
-When: January 2007
-Why: The deferred output hooks are a layering violation causing unusual
- and broken behaviour on bridge devices. Examples of things they
- break include QoS classifation using the MARK or CLASSIFY targets,
- the IPsec policy match and connection tracking with VLANs on a
- bridge. Their only use is to enable bridge output port filtering
- within iptables with the physdev match, which can also be done by
- combining iptables and ebtables using netfilter marks. Until it
- will get removed the hook deferral is disabled by default and is
- only enabled when needed.
+What: /sys/firmware/acpi/namespace
+When: 2.6.21
+Why: The ACPI namespace is effectively the symbol list for
+ the BIOS. The device names are completely arbitrary
+ and have no place being exposed to user-space.
-Who: Patrick McHardy <kaber@trash.net>
+ For those interested in the BIOS ACPI namespace,
+ the BIOS can be extracted and disassembled with acpidump
+ and iasl as documented in the pmtools package here:
+ http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
+
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: /proc/acpi/button
+When: August 2007
+Why: /proc/acpi/button has been replaced by events to the input layer
+ since 2.6.20.
+Who: Len Brown <len.brown@intel.com>
---------------------------
-What: frame diverter
-When: November 2006
-Why: The frame diverter is included in most distribution kernels, but is
- broken. It does not correctly handle many things:
- - IPV6
- - non-linear skb's
- - network device RCU on removal
- - input frames not correctly checked for protocol errors
- It also adds allocation overhead even if not enabled.
- It is not clear if anyone is still using it.
-Who: Stephen Hemminger <shemminger@osdl.org>
+What: JFFS (version 1)
+When: 2.6.21
+Why: Unmaintained for years, superceded by JFFS2 for years.
+Who: Jeff Garzik <jeff@garzik.org>
+---------------------------
git://git.onelab.eu / linux-2.6.git / blobdiff