linux 2.6.16.38 w/ vs2.0.3-rc1

[linux-2.6.git] / Documentation / serial-console.txt

diff --git a/Documentation/serial-console.txt b/Documentation/serial-console.txt
index 9a7bc8b..6c689b0 100644 (file)
--- a/Documentation/serial-console.txt
+++ b/Documentation/serial-console.txt
@@ -17,13 +17,11 @@ The format of this option is:
                        ttyX for any other virtual console
                        ttySx for a serial port
                        lp0 for the first parallel port
-                       ttyUSB0 for the first USB serial device
 
        options:        depend on the driver. For the serial port this
-                       defines the baudrate/parity/bits/flow control of
-                       the port, in the format BBBBPNF, where BBBB is the
-                       speed, P is parity (n/o/e), N is number of bits,
-                       and F is flow control ('r' for RTS). Default is
+                       defines the baudrate/parity/bits of the port,
+                       in the format BBBBPN, where BBBB is the speed,
+                       P is parity (n/o/e), and N is bits. Default is
                        9600n8. The maximum baudrate is 115200.
 
 You can specify multiple console= options on the kernel command line.
@@ -47,9 +45,6 @@ become the console.
 You will need to create a new device to use /dev/console. The official
 /dev/console is now character device 5,1.
 
-(You can also use a network device as a console.  See
-Documentation/networking/netconsole.txt for information on that.)
-
 Here's an example that will use /dev/ttyS1 (COM2) as the console.
 Replace the sample values as needed.