config ARM
bool
default y
+ select RTC_LIB
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
+config GENERIC_TIME
+ bool
+ default n
+
config MMU
bool
default y
<file:Documentation/mca.txt> (and especially the web page given
there) before attempting to build an MCA bus kernel.
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default y
+
+config HARDIRQS_SW_RESEND
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
config ARCH_MTD_XIP
bool
+config VECTORS_BASE
+ hex
+ default 0xffff0000 if MMU || CPU_HIGH_VECTOR
+ default DRAM_BASE if REMAP_VECTORS_TO_RAM
+ default 0x00000000
+ help
+ The base address of exception vectors.
+
source "init/Kconfig"
menu "System Type"
prompt "ARM system type"
default ARCH_VERSATILE
+config ARCH_AAEC2000
+ bool "Agilent AAEC-2000 based"
+ select ARM_AMBA
+ help
+ This enables support for systems based on the Agilent AAEC-2000
+
+config ARCH_INTEGRATOR
+ bool "ARM Ltd. Integrator family"
+ select ARM_AMBA
+ select ICST525
+ help
+ Support for ARM's Integrator platform.
+
+config ARCH_REALVIEW
+ bool "ARM Ltd. RealView family"
+ select ARM_AMBA
+ select ICST307
+ help
+ This enables support for ARM Ltd RealView boards.
+
+config ARCH_VERSATILE
+ bool "ARM Ltd. Versatile family"
+ select ARM_AMBA
+ select ARM_VIC
+ select ICST307
+ help
+ This enables support for ARM Ltd Versatile board.
+
+config ARCH_AT91
+ bool "Atmel AT91"
+ help
+ This enables support for systems based on the Atmel AT91RM9200
+ and AT91SAM9xxx processors.
+
config ARCH_CLPS7500
- bool "Cirrus-CL-PS7500FE"
+ bool "Cirrus CL-PS7500FE"
select TIMER_ACORN
select ISA
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
config ARCH_CLPS711X
- bool "CLPS711x/EP721x-based"
+ bool "Cirrus Logic CLPS711x/EP721x-based"
help
Support for Cirrus Logic 711x/721x based boards.
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
+config ARCH_EP93XX
+ bool "EP93xx-based"
+ select ARM_AMBA
+ select ARM_VIC
+ help
+ This enables support for the Cirrus EP93xx series of CPUs.
+
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-config ARCH_INTEGRATOR
- bool "Integrator"
- select ARM_AMBA
- select ICST525
+config ARCH_NETX
+ bool "Hilscher NetX based"
+ select ARM_VIC
help
- Support for ARM's Integrator platform.
+ This enables support for systems based on the Hilscher NetX Soc
-config ARCH_IOP3XX
- bool "IOP3xx-based"
+config ARCH_H720X
+ bool "Hynix HMS720x-based"
+ select ISA_DMA_API
+ help
+ This enables support for systems based on the Hynix HMS720x
+
+config ARCH_IMX
+ bool "IMX"
+ help
+ Support for Motorola's i.MX family of processors (MX1, MXL).
+
+config ARCH_IOP32X
+ bool "IOP32x-based"
+ depends on MMU
+ select PLAT_IOP
select PCI
help
- Support for Intel's IOP3XX (XScale) family of processors.
+ Support for Intel's 80219 and IOP32X (XScale) family of
+ processors.
+
+config ARCH_IOP33X
+ bool "IOP33x-based"
+ depends on MMU
+ select PLAT_IOP
+ select PCI
+ help
+ Support for Intel's IOP33X (XScale) family of processors.
+
+config ARCH_IOP13XX
+ bool "IOP13xx-based"
+ select PCI
+ help
+ Support for Intel's IOP13XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
- select DMABOUNCE
- select PCI
+ depends on MMU
+ select GENERIC_TIME
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
+ depends on MMU
select PCI
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
+ depends on MMU
+ select PCI
+ help
+ Support for Intel's IXP23xx (XScale) family of processors.
+
config ARCH_L7200
bool "LinkUp-L7200"
select FIQ
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_PNX4008
+ bool "Philips Nexperia PNX4008 Mobile"
+ help
+ This enables support for Philips PNX4008 mobile platform.
+
config ARCH_PXA
bool "PXA2xx-based"
+ depends on MMU
select ARCH_MTD_XIP
help
Support for Intel's PXA2XX processor line.
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
-config ARCH_VERSATILE
- bool "Versatile"
- select ARM_AMBA
- select ARM_VIC
- select ICST307
- help
- This enables support for ARM Ltd Versatile board.
-
-config ARCH_REALVIEW
- bool "RealView"
- select ARM_AMBA
- select ICST307
- help
- This enables support for ARM Ltd RealView boards.
-
-config ARCH_IMX
- bool "IMX"
- help
- Support for Motorola's i.MX family of processors (MX1, MXL).
-
-config ARCH_H720X
- bool "Hynix-HMS720x-based"
- select ISA_DMA_API
- help
- This enables support for systems based on the Hynix HMS720x
-
-config ARCH_AAEC2000
- bool "Agilent AAEC-2000 based"
- select ARM_AMBA
- help
- This enables support for systems based on the Agilent AAEC-2000
-
-config ARCH_AT91RM9200
- bool "AT91RM9200"
- help
- Say Y here if you intend to run this kernel on an Atmel
- AT91RM9200-based board.
-
endchoice
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-ep93xx/Kconfig"
+
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
-source "arch/arm/mach-iop3xx/Kconfig"
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-iop33x/Kconfig"
+
+source "arch/arm/mach-iop13xx/Kconfig"
source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-ixp2000/Kconfig"
+source "arch/arm/mach-ixp23xx/Kconfig"
+
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
+config PLAT_IOP
+ bool
+
source arch/arm/mm/Kconfig
+config IWMMXT
+ bool "Enable iWMMXt support"
+ depends CPU_XSCALE || CPU_XSC3
+ default y if PXA27x
+ help
+ Enable support for iWMMXt context switching at run time if
+ running on a CPU that supports it.
+
# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
config XSCALE_PMU
bool
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
default y
+if !MMU
+source "arch/arm/Kconfig-nommu"
+endif
+
endmenu
source "arch/arm/common/Kconfig"
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
Currently at least OMAP, PXA2xx and SA11x0 platforms are known
to have accurate timekeeping with dynamic tick.
+config HZ
+ int
+ default 128 if ARCH_L7200
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410
+ default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+ default 100
+
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+config NODES_SHIFT
+ int
+ default "4" if ARCH_LH7A40X
+ default "2"
+ depends on NEED_MULTIPLE_NODES
+
source "mm/Kconfig"
config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91RM9200
+ ARCH_AT91 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
config ALIGNMENT_TRAP
bool
+ depends on CPU_CP15_MMU
default y if !ARCH_EBSA110
help
- ARM processors can not fetch/store information which is not
+ ARM processors cannot fetch/store information which is not
naturally aligned on the bus, i.e., a 4 byte fetch must start at an
address divisible by 4. On 32-bit ARM processors, these non-aligned
fetch/store instructions will be emulated in software if you say
hex "Compressed ROM boot loader BSS address"
default "0"
help
- The base address of 64KiB of read/write memory in the target
- for the ROM-able zImage, which must be available while the
- decompressor is running. Platforms which normally make use of
- ROM-able zImage formats normally set this to a suitable
- value in their defconfig file.
+ The base address of an area of read/write memory in the target
+ for the ROM-able zImage which must be available while the
+ decompressor is running. It must be large enough to hold the
+ entire decompressed kernel plus an additional 128 KiB.
+ Platforms which normally make use of ROM-able zImage formats
+ normally set this to a suitable value in their defconfig file.
If ZBOOT_ROM is not enabled, this has no effect.
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
menu "CPU Frequency scaling"
If in doubt, say Y.
+config CPU_FREQ_IMX
+ tristate "CPUfreq driver for i.MX CPUs"
+ depends on ARCH_IMX && CPU_FREQ
+ default n
+ help
+ This enables the CPUfreq driver for i.MX CPUs.
+
+ If in doubt, say N.
+
endmenu
endif
source "drivers/connector/Kconfig"
-if ALIGNMENT_TRAP
+if ALIGNMENT_TRAP || !CPU_CP15_MMU
source "drivers/mtd/Kconfig"
endif
source "drivers/acorn/block/Kconfig"
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+ || ARCH_IXP23XX
source "drivers/ide/Kconfig"
endif
source "drivers/scsi/Kconfig"
+source "drivers/ata/Kconfig"
+
source "drivers/md/Kconfig"
source "drivers/message/fusion/Kconfig"
source "drivers/mfd/Kconfig"
+source "drivers/leds/Kconfig"
+
source "drivers/media/Kconfig"
source "drivers/video/Kconfig"
source "sound/Kconfig"
+source "drivers/hid/Kconfig"
+
source "drivers/usb/Kconfig"
source "drivers/mmc/Kconfig"
+source "drivers/rtc/Kconfig"
+
endmenu
source "fs/Kconfig"
git://git.onelab.eu / linux-2.6.git / blobdiff