config ARM
bool
default y
- select RTC_LIB
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
<file:Documentation/mca.txt> (and especially the web page given
there) before attempting to build an MCA bus kernel.
-config GENERIC_HARDIRQS
- bool
- default y
-
-config HARDIRQS_SW_RESEND
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
config RWSEM_GENERIC_SPINLOCK
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
-config GENERIC_HWEIGHT
- bool
- default y
-
config GENERIC_CALIBRATE_DELAY
bool
default y
config ARCH_MTD_XIP
bool
-config VECTORS_BASE
- hex
- default 0xffff0000 if MMU
- default DRAM_BASE if REMAP_VECTORS_TO_RAM
- default 0x00000000
- help
- The base address of exception vectors.
-
source "init/Kconfig"
menu "System Type"
prompt "ARM system type"
default ARCH_VERSATILE
-config ARCH_AAEC2000
- bool "Agilent AAEC-2000 based"
- select ARM_AMBA
- help
- This enables support for systems based on the Agilent AAEC-2000
-
-config ARCH_INTEGRATOR
- bool "ARM Ltd. Integrator family"
- select ARM_AMBA
- select ICST525
- help
- Support for ARM's Integrator platform.
-
-config ARCH_REALVIEW
- bool "ARM Ltd. RealView family"
- select ARM_AMBA
- select ICST307
- help
- This enables support for ARM Ltd RealView boards.
-
-config ARCH_VERSATILE
- bool "ARM Ltd. Versatile family"
- select ARM_AMBA
- select ARM_VIC
- select ICST307
- help
- This enables support for ARM Ltd Versatile board.
-
-config ARCH_AT91
- bool "Atmel AT91"
- help
- This enables support for systems based on the Atmel AT91RM9200
- and AT91SAM9xxx processors.
-
config ARCH_CLPS7500
- bool "Cirrus CL-PS7500FE"
+ bool "Cirrus-CL-PS7500FE"
select TIMER_ACORN
select ISA
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
config ARCH_CLPS711X
- bool "Cirrus Logic CLPS711x/EP721x-based"
+ bool "CLPS711x/EP721x-based"
help
Support for Cirrus Logic 711x/721x based boards.
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
-config ARCH_EP93XX
- bool "EP93xx-based"
- select ARM_AMBA
- select ARM_VIC
- help
- This enables support for the Cirrus EP93xx series of CPUs.
-
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-config ARCH_NETX
- bool "Hilscher NetX based"
- select ARM_VIC
- help
- This enables support for systems based on the Hilscher NetX Soc
-
-config ARCH_H720X
- bool "Hynix HMS720x-based"
- select ISA_DMA_API
- help
- This enables support for systems based on the Hynix HMS720x
-
-config ARCH_IMX
- bool "IMX"
+config ARCH_INTEGRATOR
+ bool "Integrator"
+ select ARM_AMBA
+ select ICST525
help
- Support for Motorola's i.MX family of processors (MX1, MXL).
+ Support for ARM's Integrator platform.
config ARCH_IOP3XX
bool "IOP3xx-based"
- depends on MMU
select PCI
help
Support for Intel's IOP3XX (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
- depends on MMU
+ select DMABOUNCE
+ select PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
- depends on MMU
select PCI
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
-config ARCH_IXP23XX
- bool "IXP23XX-based"
- depends on MMU
- select PCI
- help
- Support for Intel's IXP23xx (XScale) family of processors.
-
config ARCH_L7200
bool "LinkUp-L7200"
select FIQ
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
-config ARCH_PNX4008
- bool "Philips Nexperia PNX4008 Mobile"
- help
- This enables support for Philips PNX4008 mobile platform.
-
config ARCH_PXA
bool "PXA2xx-based"
- depends on MMU
select ARCH_MTD_XIP
help
Support for Intel's PXA2XX processor line.
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+ bool "Samsung S3C2410"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_VERSATILE
+ bool "Versatile"
+ select ARM_AMBA
+ select ARM_VIC
+ select ICST307
+ help
+ This enables support for ARM Ltd Versatile board.
+
+config ARCH_REALVIEW
+ bool "RealView"
+ select ARM_AMBA
+ select ICST307
+ help
+ This enables support for ARM Ltd RealView boards.
+
+config ARCH_IMX
+ bool "IMX"
+ help
+ Support for Motorola's i.MX family of processors (MX1, MXL).
+
+config ARCH_H720X
+ bool "Hynix-HMS720x-based"
+ select ISA_DMA_API
+ help
+ This enables support for systems based on the Hynix HMS720x
+
+config ARCH_AAEC2000
+ bool "Agilent AAEC-2000 based"
+ select ARM_AMBA
+ help
+ This enables support for systems based on the Agilent AAEC-2000
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+ help
+ Say Y here if you intend to run this kernel on an Atmel
+ AT91RM9200-based board.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
-source "arch/arm/mach-ep93xx/Kconfig"
-
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-ixp2000/Kconfig"
-source "arch/arm/mach-ixp23xx/Kconfig"
-
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/mach-at91rm9200/Kconfig"
-source "arch/arm/mach-netx/Kconfig"
-
# Definitions to make life easier
config ARCH_ACORN
bool
depends on CPU_XSCALE && !XSCALE_PMU_TIMER
default y
-if !MMU
-source "arch/arm/Kconfig-nommu"
-endif
-
endmenu
source "arch/arm/common/Kconfig"
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
Currently at least OMAP, PXA2xx and SA11x0 platforms are known
to have accurate timekeeping with dynamic tick.
-config HZ
- int
- default 128 if ARCH_L7200
- default 200 if ARCH_EBSA110 || ARCH_S3C2410
- default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
- default 100
-
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
-config NODES_SHIFT
- int
- default "4" if ARCH_LH7A40X
- default "2"
- depends on NEED_MULTIPLE_NODES
-
source "mm/Kconfig"
config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91RM9200 || MACH_TRIZEPS4
+ ARCH_AT91RM9200
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
menu "CPU Frequency scaling"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
- || ARCH_IXP23XX
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
source "drivers/ide/Kconfig"
endif
source "drivers/mfd/Kconfig"
-source "drivers/leds/Kconfig"
-
source "drivers/media/Kconfig"
source "drivers/video/Kconfig"
source "drivers/mmc/Kconfig"
-source "drivers/rtc/Kconfig"
-
endmenu
source "fs/Kconfig"