This commit was manufactured by cvs2svn to create branch 'vserver'.

[linux-2.6.git] / arch / arm / mach-at91rm9200 / board-carmeva.c

diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c
new file mode 100644 (file)
index 0000000..1efcd04
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-carmeva.c
@@ -0,0 +1,130 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-carmeva.c
+ *
+ *  Copyright (c) 2005 Peer Georgi
+ *                    Conitec Datasystems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+static void __init carmeva_init_irq(void)
+{
+       /* Initialize AIC controller */
+       at91rm9200_init_irq(NULL);
+
+       /* Set up the GPIO interrupts */
+       at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata carmeva_uart_config = {
+       .console_tty    = 0,                            /* ttyS0 */
+       .nr_tty         = 2,
+       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
+
+static void __init carmeva_map_io(void)
+{
+       at91rm9200_map_io();
+
+       /* Initialize clocks: 20.000 MHz crystal */
+       at91_clock_init(20000000);
+
+       /* Setup the serial ports and console */
+       at91_init_serial(&carmeva_uart_config);
+}
+
+static struct at91_eth_data __initdata carmeva_eth_data = {
+       .phy_irq_pin    = AT91_PIN_PC4,
+       .is_rmii        = 1,
+};
+
+static struct at91_usbh_data __initdata carmeva_usbh_data = {
+       .ports          = 2,
+};
+
+static struct at91_udc_data __initdata carmeva_udc_data = {
+       .vbus_pin       = AT91_PIN_PD12,
+       .pullup_pin     = AT91_PIN_PD9,
+};
+
+/* FIXME: user dependend */
+// static struct at91_cf_data __initdata carmeva_cf_data = {
+//     .det_pin        = AT91_PIN_PB0,
+//     .rst_pin        = AT91_PIN_PC5,
+       // .irq_pin     = ... not connected
+       // .vcc_pin     = ... always powered
+// };
+
+static struct at91_mmc_data __initdata carmeva_mmc_data = {
+       .is_b           = 0,
+       .wire4          = 1,
+};
+
+static void __init carmeva_board_init(void)
+{
+       /* Serial */
+       at91_add_device_serial();
+       /* Ethernet */
+       at91_add_device_eth(&carmeva_eth_data);
+       /* USB Host */
+       at91_add_device_usbh(&carmeva_usbh_data);
+       /* USB Device */
+       at91_add_device_udc(&carmeva_udc_data);
+       /* I2C */
+       at91_add_device_i2c();
+       /* Compact Flash */
+//     at91_add_device_cf(&carmeva_cf_data);
+       /* SPI */
+//     at91_add_device_spi(NULL, 0);
+       /* MMC */
+       at91_add_device_mmc(&carmeva_mmc_data);
+}
+
+MACHINE_START(CARMEVA, "Carmeva")
+       /* Maintainer: Conitec Datasystems */
+       .phys_io        = AT91_BASE_SYS,
+       .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+       .boot_params    = AT91_SDRAM_BASE + 0x100,
+       .timer          = &at91rm9200_timer,
+       .map_io         = carmeva_map_io,
+       .init_irq       = carmeva_init_irq,
+       .init_machine   = carmeva_board_init,
+MACHINE_END