linux 2.6.16.38 w/ vs2.0.3-rc1

[linux-2.6.git] / arch / arm / mach-at91rm9200 / board-csb337.c

diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index 794d3fb..54022e5 100644 (file)
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -18,12 +18,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -34,9 +34,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -54,24 +54,29 @@ static void __init csb337_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-static struct at91_uart_config __initdata csb337_uart_config = {
-       .console_tty    = 0,                            /* ttyS0 */
-       .nr_tty         = 2,
-       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
+#define CSB337_UART_MAP                { 4, 1, -1, -1, -1 }    /* ttyS0, ..., ttyS4 */
+#define CSB337_SERIAL_CONSOLE  0                       /* ttyS0 */
 
 static void __init csb337_map_io(void)
 {
+       int serial[AT91_NR_UART] = CSB337_UART_MAP;
+       int i;
+
        at91rm9200_map_io();
 
        /* Initialize clocks: 3.6864 MHz crystal */
        at91_clock_init(3686400);
 
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+#ifdef CONFIG_SERIAL_AT91
+       at91_console_port = CSB337_SERIAL_CONSOLE;
+       memcpy(at91_serial_map, serial, sizeof(serial));
 
-       /* Setup the serial ports and console */
-       at91_init_serial(&csb337_uart_config);
+       /* Register UARTs */
+       for (i = 0; i < AT91_NR_UART; i++) {
+               if (serial[i] >= 0)
+                       at91_register_uart(i, serial[i]);
+       }
+#endif
 }
 
 static struct at91_eth_data __initdata csb337_eth_data = {
@@ -110,31 +115,17 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
        .wp_pin         = AT91_PIN_PD6,
 };
 
-static struct spi_board_info csb337_spi_devices[] = {
-       {       /* CAN controller */
-               .modalias       = "sak82c900",
-               .chip_select    = 0,
-               .max_speed_hz   = 6 * 1000 * 1000,
-       },
-};
-
 static void __init csb337_board_init(void)
 {
-       /* Serial */
-       at91_add_device_serial();
        /* Ethernet */
        at91_add_device_eth(&csb337_eth_data);
        /* USB Host */
        at91_add_device_usbh(&csb337_usbh_data);
        /* USB Device */
        at91_add_device_udc(&csb337_udc_data);
-       /* I2C */
-       at91_add_device_i2c();
        /* Compact Flash */
        at91_set_gpio_input(AT91_PIN_PB22, 1);          /* IOIS16 */
        at91_add_device_cf(&csb337_cf_data);
-       /* SPI */
-       at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
        /* MMC */
        at91_add_device_mmc(&csb337_mmc_data);
 }