fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / arch / arm / mach-at91rm9200 / board-csb337.c

diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index 54022e5..b8bb805 100644 (file)
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -18,12 +18,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -34,49 +34,38 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
-static void __init csb337_init_irq(void)
-{
-       /* Initialize AIC controller */
-       at91rm9200_init_irq(NULL);
-
-       /* Set up the GPIO interrupts */
-       at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
 
 /*
  * Serial port configuration.
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define CSB337_UART_MAP                { 4, 1, -1, -1, -1 }    /* ttyS0, ..., ttyS4 */
-#define CSB337_SERIAL_CONSOLE  0                       /* ttyS0 */
+static struct at91_uart_config __initdata csb337_uart_config = {
+       .console_tty    = 0,                            /* ttyS0 */
+       .nr_tty         = 2,
+       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
 
 static void __init csb337_map_io(void)
 {
-       int serial[AT91_NR_UART] = CSB337_UART_MAP;
-       int i;
-
-       at91rm9200_map_io();
+       /* Initialize processor: 3.6864 MHz crystal */
+       at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
-       /* Initialize clocks: 3.6864 MHz crystal */
-       at91_clock_init(3686400);
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 
-#ifdef CONFIG_SERIAL_AT91
-       at91_console_port = CSB337_SERIAL_CONSOLE;
-       memcpy(at91_serial_map, serial, sizeof(serial));
+       /* Setup the serial ports and console */
+       at91_init_serial(&csb337_uart_config);
+}
 
-       /* Register UARTs */
-       for (i = 0; i < AT91_NR_UART; i++) {
-               if (serial[i] >= 0)
-                       at91_register_uart(i, serial[i]);
-       }
-#endif
+static void __init csb337_init_irq(void)
+{
+       at91rm9200_init_interrupts(NULL);
 }
 
 static struct at91_eth_data __initdata csb337_eth_data = {
@@ -110,22 +99,36 @@ static struct at91_cf_data __initdata csb337_cf_data = {
 
 static struct at91_mmc_data __initdata csb337_mmc_data = {
        .det_pin        = AT91_PIN_PD5,
-       .is_b           = 0,
+       .slot_b         = 0,
        .wire4          = 1,
        .wp_pin         = AT91_PIN_PD6,
 };
 
+static struct spi_board_info csb337_spi_devices[] = {
+       {       /* CAN controller */
+               .modalias       = "sak82c900",
+               .chip_select    = 0,
+               .max_speed_hz   = 6 * 1000 * 1000,
+       },
+};
+
 static void __init csb337_board_init(void)
 {
+       /* Serial */
+       at91_add_device_serial();
        /* Ethernet */
        at91_add_device_eth(&csb337_eth_data);
        /* USB Host */
        at91_add_device_usbh(&csb337_usbh_data);
        /* USB Device */
        at91_add_device_udc(&csb337_udc_data);
+       /* I2C */
+       at91_add_device_i2c();
        /* Compact Flash */
        at91_set_gpio_input(AT91_PIN_PB22, 1);          /* IOIS16 */
        at91_add_device_cf(&csb337_cf_data);
+       /* SPI */
+       at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
        /* MMC */
        at91_add_device_mmc(&csb337_mmc_data);
 }