* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/config.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <asm/arch/hardware.h>
+#include <asm/mach/serial_at91rm9200.h>
#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
#include "generic.h"
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
-static struct at91_uart_config __initdata csb637_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
+#define CSB637_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+#define CSB637_SERIAL_CONSOLE 0 /* ttyS0 */
static void __init csb637_map_io(void)
{
+ int serial[AT91_NR_UART] = CSB637_UART_MAP;
+ int i;
+
at91rm9200_map_io();
/* Initialize clocks: 3.6864 MHz crystal */
at91_clock_init(3686400);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+#ifdef CONFIG_SERIAL_AT91
+ at91_console_port = CSB637_SERIAL_CONSOLE;
+ memcpy(at91_serial_map, serial, sizeof(serial));
- /* Setup the serial ports and console */
- at91_init_serial(&csb637_uart_config);
+ /* Register UARTs */
+ for (i = 0; i < AT91_NR_UART; i++) {
+ if (serial[i] >= 0)
+ at91_register_uart(i, serial[i]);
+ }
+#endif
}
static struct at91_eth_data __initdata csb637_eth_data = {
static void __init csb637_board_init(void)
{
- /* Serial */
- at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb637_eth_data);
/* USB Host */
at91_add_device_usbh(&csb637_usbh_data);
/* USB Device */
at91_add_device_udc(&csb637_udc_data);
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(NULL, 0);
}
MACHINE_START(CSB637, "Cogent CSB637")