Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff

[linux-2.6.git] / arch / arm / mach-ixp4xx / Kconfig

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 89762a2..3b23f43 100644 (file)
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -8,8 +8,18 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
+config MACH_NSLU2
+       bool
+       prompt "Linksys NSLU2"
+       select PCI
+       help
+         Say 'Y' here if you want your kernel to support Linksys's
+         NSLU2 NAS device. For more information on this platform,
+         see http://www.nslu2-linux.org
+
 config ARCH_AVILA
        bool "Avila"
+       select PCI
        help
          Say 'Y' here if you want your kernel to support the Gateworks
          Avila Network Platform. For more information on this platform,
@@ -17,6 +27,7 @@ config ARCH_AVILA
 
 config ARCH_ADI_COYOTE
        bool "Coyote"
+       select PCI
        help
          Say 'Y' here if you want your kernel to support the ADI 
          Engineering Coyote Gateway Reference Platform. For more
@@ -24,6 +35,7 @@ config ARCH_ADI_COYOTE
 
 config ARCH_IXDP425
        bool "IXDP425"
+       select PCI
        help
          Say 'Y' here if you want your kernel to support Intel's 
          IXDP425 Development Platform (Also known as Richfield).  
@@ -31,6 +43,7 @@ config ARCH_IXDP425
 
 config MACH_IXDPG425
        bool "IXDPG425"
+       select PCI
        help
          Say 'Y' here if you want your kernel to support Intel's
          IXDPG425 Development Platform (Also known as Montajade).
@@ -38,6 +51,7 @@ config MACH_IXDPG425
 
 config MACH_IXDP465
        bool "IXDP465"
+       select PCI
        help
          Say 'Y' here if you want your kernel to support Intel's
          IXDP465 Development Platform (Also known as BMP).
@@ -61,6 +75,15 @@ config ARCH_PRPMC1100
          PrPCM1100 Processor Mezanine Module. For more information on
          this platform, see <file:Documentation/arm/IXP4xx>.
 
+config MACH_NAS100D
+       bool
+       prompt "NAS100D"
+       select PCI
+       help
+         Say 'Y' here if you want your kernel to support Iomega's
+         NAS 100d device. For more information on this platform,
+         see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
+
 #
 # Avila and IXDP share the same source for now. Will change in future
 #
@@ -80,6 +103,7 @@ config CPU_IXP46X
 config MACH_GTWX5715
        bool "Gemtek WX5715 (Linksys WRV54G)"
        depends on ARCH_IXP4XX
+       select PCI
        help
                This board is currently inside the Linksys WRV54G Gateways.
 
@@ -94,11 +118,16 @@ config MACH_GTWX5715
                "High Speed" UART is n/c (as far as I can tell)
                20 Pin ARM/Xscale JTAG interface on J2
 
-
 comment "IXP4xx Options"
 
+config DMABOUNCE
+       bool
+       default y
+       depends on PCI
+
 config IXP4XX_INDIRECT_PCI
        bool "Use indirect PCI memory access"
+       depends on PCI
        help
           IXP4xx provides two methods of accessing PCI memory space:
 
@@ -112,7 +141,7 @@ config IXP4XX_INDIRECT_PCI
           2) If > 64MB of memory space is required, the IXP4xx can be 
             configured to use indirect registers to access PCI This allows 
             for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-            The disadvantadge of this is that every PCI access requires 
+            The disadvantage of this is that every PCI access requires 
             three local register accesses plus a spinlock, but in some 
             cases the performance hit is acceptable. In addition, you cannot 
             mmap() PCI devices in this case due to the indirect nature