vserver 1.9.5.x5

[linux-2.6.git] / arch / arm / mach-ixp4xx / Kconfig

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 46b72e1..aacb5f9 100644 (file)
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -13,22 +13,37 @@ config ARCH_AVILA
        help
          Say 'Y' here if you want your kernel to support the Gateworks
          Avila Network Platform. For more information on this platform,
-         see Documentation/arm/IXP4xx.
+         see <file:Documentation/arm/IXP4xx>.
 
 config ARCH_ADI_COYOTE
        bool "Coyote"
        help
          Say 'Y' here if you want your kernel to support the ADI 
          Engineering Coyote Gateway Reference Platform. For more
-         information on this platform, see Documentation/arm/IXP4xx.
+         information on this platform, see <file:Documentation/arm/IXP4xx>.
 
 config ARCH_IXDP425
        bool "IXDP425"
        help
          Say 'Y' here if you want your kernel to support Intel's 
          IXDP425 Development Platform (Also known as Richfield).  
+         For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_IXDPG425
+       bool "IXDPG425"
+       help
+         Say 'Y' here if you want your kernel to support Intel's
+         IXDPG425 Development Platform (Also known as Montajade).
+         For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_IXDP465
+       bool "IXDP465"
+       help
+         Say 'Y' here if you want your kernel to support Intel's
+         IXDP465 Development Platform (Also known as BMP).
          For more information on this platform, see Documentation/arm/IXP4xx.
 
+
 #
 # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
 # number from the bootloader due to marketing monkeys, so we just enable it 
@@ -44,16 +59,42 @@ config ARCH_PRPMC1100
        help
          Say 'Y' here if you want your kernel to support the Motorola
          PrPCM1100 Processor Mezanine Module. For more information on
-         this platform, see Documentation/arm/IXP4xx.
+         this platform, see <file:Documentation/arm/IXP4xx>.
 
 #
 # Avila and IXDP share the same source for now. Will change in future
 #
 config ARCH_IXDP4XX
        bool
-       depends on ARCH_IXDP425 || ARCH_AVILA
+       depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
+       default y
+
+#
+# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+#
+config CPU_IXP46X
+       bool
+       depends on MACH_IXDP465
        default y
 
+config MACH_GTWX5715
+       bool "Gemtek WX5715 (Linksys WRV54G)"
+       depends on ARCH_IXP4XX
+       help
+               This board is currently inside the Linksys WRV54G Gateways.
+
+               IXP425 - 266mhz
+               32mb SDRAM
+               8mb Flash
+               miniPCI slot 0 does not have a card connector soldered to the board
+               miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
+               npe0 is connected to a Kendin KS8995M Switch (4 ports)
+               npe1 is the "wan" port
+               "Console" UART is available on J11 as console
+               "High Speed" UART is n/c (as far as I can tell)
+               20 Pin ARM/Xscale JTAG interface on J2
+
+
 comment "IXP4xx Options"
 
 config IXP4XX_INDIRECT_PCI
@@ -64,7 +105,7 @@ config IXP4XX_INDIRECT_PCI
           1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
              To access PCI via this space, we simply ioremap() the BAR
              into the kernel and we can use the standard read[bwl]/write[bwl]
-             macros. This is the preffered method due to speed but it
+             macros. This is the preferred method due to speed but it
              limits the system to just 64MB of PCI memory. This can be 
              problamatic if using video cards and other memory-heavy devices.