--- /dev/null
+/* lcd-panel.h
+ $Id$
+
+ written by Marc Singer
+ 18 Jul 2005
+
+ Copyright (C) 2005 Marc Singer
+
+ -----------
+ DESCRIPTION
+ -----------
+
+ Only one panel may be defined at a time.
+
+ The pixel clock is calculated to be no greater than the target.
+
+ Each timing value is accompanied by a specification comment.
+
+ UNITS/MIN/TYP/MAX
+
+ Most of the units will be in clocks.
+
+ USE_RGB555
+
+ Define this macro to configure the AMBA LCD controller to use an
+ RGB555 encoding for the pels instead of the normal RGB565.
+
+ LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11
+
+ These boards are best approximated by 555 for all panels. Some
+ can use an extra low-order bit of blue in bit 16 of the color
+ value, but we don't have a way to communicate this non-linear
+ mapping to the kernel.
+
+*/
+
+#if !defined (__LCD_PANEL_H__)
+# define __LCD_PANEL_H__
+
+#if defined (MACH_LPD79520)\
+ || defined (MACH_LPD79524)\
+ || defined (MACH_LPD7A400)\
+ || defined (MACH_LPD7A404)
+# define USE_RGB555
+#endif
+
+struct clcd_panel_extra {
+ unsigned int hrmode;
+ unsigned int clsen;
+ unsigned int spsen;
+ unsigned int pcdel;
+ unsigned int revdel;
+ unsigned int lpdel;
+ unsigned int spldel;
+ unsigned int pc2del;
+};
+
+#define NS_TO_CLOCK(ns,c) ((((ns)*((c)/1000) + (1000000 - 1))/1000000))
+#define CLOCK_TO_DIV(e,c) (((c) + (e) - 1)/(e))
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+
+ /* Logic Product Development LCD 3.5" QVGA HRTFT -10 */
+ /* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */
+
+#define PIX_CLOCK_TARGET (6800000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "3.5in QVGA (LQ035Q7DB02)",
+ .xres = 240,
+ .yres = 320,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 16,
+ .right_margin = 21,
+ .upper_margin = 8, // line/8/8/8
+ .lower_margin = 5,
+ .hsync_len = 61,
+ .vsync_len = NS_TO_CLOCK (60, PIX_CLOCK),
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IPC | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#define HAS_LCD_PANEL_EXTRA
+
+static struct clcd_panel_extra lcd_panel_extra = {
+ .hrmode = 1,
+ .clsen = 1,
+ .spsen = 1,
+ .pcdel = 8,
+ .revdel = 7,
+ .lpdel = 13,
+ .spldel = 77,
+ .pc2del = 208,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02
+
+ /* Logic Product Development LCD 5.7" QVGA -10 */
+ /* Sharp PN LQ057Q3DC02 */
+ /* QVGA mode, V/Q=LOW */
+
+/* From Sharp on 2006.1.3. I believe some of the values are incorrect
+ * based on the datasheet.
+
+ Timing0 TIMING1 TIMING2 CONTROL
+ 0x140A0C4C 0x080504EF 0x013F380D 0x00000829
+ HBP= 20 VBP= 8 BCD= 0
+ HFP= 10 VFP= 5 CPL=319
+ HSW= 12 VSW= 1 IOE= 0
+ PPL= 19 LPP=239 IPC= 1
+ IHS= 1
+ IVS= 1
+ ACB= 0
+ CSEL= 0
+ PCD= 13
+
+ */
+
+/* The full horozontal cycle (Th) is clock/360/400/450. */
+/* The full vertical cycle (Tv) is line/251/262/280. */
+
+#define PIX_CLOCK_TARGET (6300000) /* -/6.3/7 MHz */
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "5.7in QVGA (LQ057Q3DC02)",
+ .xres = 320,
+ .yres = 240,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 11,
+ .right_margin = 400-11-320-2,
+ .upper_margin = 7, // line/7/7/7
+ .lower_margin = 262-7-240-2,
+ .hsync_len = 2, // clk/2/96/200
+ .vsync_len = 2, // line/2/-/34
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343
+
+ /* Logic Product Development LCD 6.4" VGA -10 */
+ /* Sharp PN LQ64D343 */
+
+/* The full horozontal cycle (Th) is clock/750/800/900. */
+/* The full vertical cycle (Tv) is line/515/525/560. */
+
+#define PIX_CLOCK_TARGET (28330000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "6.4in QVGA (LQ64D343)",
+ .xres = 640,
+ .yres = 480,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 32,
+ .right_margin = 800-32-640-96,
+ .upper_margin = 32, // line/34/34/34
+ .lower_margin = 540-32-480-2,
+ .hsync_len = 96, // clk/2/96/200
+ .vsync_len = 2, // line/2/-/34
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368
+
+ /* Logic Product Development LCD 10.4" VGA -10 */
+ /* Sharp PN LQ10D368 */
+
+#define PIX_CLOCK_TARGET (28330000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "10.4in VGA (LQ10D368)",
+ .xres = 640,
+ .yres = 480,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 21,
+ .right_margin = 15,
+ .upper_margin = 34,
+ .lower_margin = 5,
+ .hsync_len = 96,
+ .vsync_len = 16,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41
+
+ /* Logic Product Development LCD 12.1" SVGA -10 */
+ /* Sharp PN LQ121S1DG41, was LQ121S1DG31 */
+
+/* Note that with a 99993900 Hz HCLK, it is not possible to hit the
+ * target clock frequency range of 35MHz to 42MHz. */
+
+/* If the target pixel clock is substantially lower than the panel
+ * spec, this is done to prevent the LCD display from glitching when
+ * the CPU is under load. A pixel clock higher than 25MHz
+ * (empirically determined) will compete with the CPU for bus cycles
+ * for the Ethernet chip. However, even a pixel clock of 10MHz
+ * competes with Compact Flash interface during some operations
+ * (fdisk, e2fsck). And, at that speed the display may have a visible
+ * flicker. */
+
+/* The full horozontal cycle (Th) is clock/832/1056/1395. */
+
+#define PIX_CLOCK_TARGET (20000000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "12.1in SVGA (LQ121S1DG41)",
+ .xres = 800,
+ .yres = 600,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 89, // ns/5/-/(1/PIX_CLOCK)-10
+ .right_margin = 1056-800-89-128,
+ .upper_margin = 23, // line/23/23/23
+ .lower_margin = 44,
+ .hsync_len = 128, // clk/2/128/200
+ .vsync_len = 4, // line/2/4/6
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_HITACHI
+
+ /* Hitachi*/
+ /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET (49000000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "Hitachi 800x480",
+ .xres = 800,
+ .yres = 480,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 128,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+
+#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE
+
+ /* AU Optotronics A070VW01 7.0 Wide Screen color Display*/
+ /* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET (10000000)
+#define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK (HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+ .mode = {
+ .name = "7.0in Wide (A070VW01)",
+ .xres = 480,
+ .yres = 234,
+ .pixclock = PIX_CLOCK,
+ .left_margin = 30,
+ .right_margin = 25,
+ .upper_margin = 14,
+ .lower_margin = 12,
+ .hsync_len = 100,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IPC | TIM2_IHS | TIM2_IVS
+ | (PIX_CLOCK_DIVIDER - 2),
+ .cntl = CNTL_LCDTFT | CNTL_WATERMARK,
+ .bpp = 16,
+};
+
+#endif
+
+#undef NS_TO_CLOCK
+#undef CLOCK_TO_DIV
+
+#endif /* __LCD_PANEL_H__ */
git://git.onelab.eu / linux-2.6.git / blobdiff