#include "common.h"
-extern void __init omap_init_time(void);
+static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
#ifdef CONFIG_ARCH_OMAP1510
-extern int omap_gpio_init(void);
-
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
#endif /* CONFIG_ARCH_OMAP1510 */
-#ifdef CONFIG_ARCH_OMAP1610
-
-static struct map_desc innovator1610_io_desc[] __initdata = {
-{ OMAP1610_ETHR_BASE, OMAP1610_ETHR_START, OMAP1610_ETHR_SIZE,MT_DEVICE },
-{ OMAP1610_NOR_FLASH_BASE, OMAP1610_NOR_FLASH_START, OMAP1610_NOR_FLASH_SIZE,
- MT_DEVICE },
-};
+#ifdef CONFIG_ARCH_OMAP16XX
static struct resource innovator1610_smc91x_resources[] = {
[0] = {
- .start = OMAP1610_ETHR_START, /* Physical */
- .end = OMAP1610_ETHR_START + SZ_4K,
+ .start = INNOVATOR1610_ETHR_START, /* Physical */
+ .end = INNOVATOR1610_ETHR_START + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 0, /* Really GPIO 0 */
- .end = 0,
+ .start = OMAP_GPIO_IRQ(0),
+ .end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ,
},
};
&innovator1610_smc91x_device,
};
-#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* CONFIG_ARCH_OMAP16XX */
+
+static void __init innovator_init_smc91x(void)
+{
+ if (cpu_is_omap1510()) {
+ fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+ OMAP1510_FPGA_RST);
+ udelay(750);
+ } else {
+ if ((omap_request_gpio(0)) < 0) {
+ printk("Error requesting gpio 0 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
+ }
+}
void innovator_init_irq(void)
{
omap_init_irq();
+ omap_gpio_init();
#ifdef CONFIG_ARCH_OMAP1510
if (cpu_is_omap1510()) {
- omap_gpio_init();
omap1510_fpga_init_irq();
}
#endif
+ innovator_init_smc91x();
}
#ifdef CONFIG_ARCH_OMAP1510
static struct omap_usb_config innovator1510_usb_config __initdata = {
- /* has usb host and device, but no Mini-AB port */
+ /* for bundled non-standard host and peripheral cables */
+ .hmc_mode = 4,
+
.register_host = 1,
+ .pins[1] = 6,
+ .pins[2] = 6, /* Conflicts with UART2 */
+
.register_dev = 1,
- /* Assume bad Innovator wiring; Use internal host only with custom cable */
- .hmc_mode = 16,
.pins[0] = 2,
};
#endif
-#ifdef CONFIG_ARCH_OMAP1610
+#ifdef CONFIG_ARCH_OMAP16XX
static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
}
#endif
-#ifdef CONFIG_ARCH_OMAP1610
+#ifdef CONFIG_ARCH_OMAP16XX
if (!cpu_is_omap1510()) {
platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
}
if (cpu_is_omap1510())
innovator_config[0].data = &innovator1510_usb_config;
#endif
-#ifdef CONFIG_ARCH_OMAP1610
+#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610())
innovator_config[0].data = &h2_usb_config;
#endif
fpga_read(OMAP1510_FPGA_BOARD_REV));
}
#endif
-#ifdef CONFIG_ARCH_OMAP1610
- if (!cpu_is_omap1510()) {
- iotable_init(innovator1610_io_desc, ARRAY_SIZE(innovator1610_io_desc));
- }
-#endif
+ omap_serial_init(innovator_serial_ports);
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
MAPIO(innovator_map_io)
INITIRQ(innovator_init_irq)
INIT_MACHINE(innovator_init)
- INITTIME(omap_init_time)
+ .timer = &omap_timer,
MACHINE_END