#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/gpio.h>
#include <asm/arch/tc.h>
#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-
-static int innovator_keymap[] = {
- KEY(0, 0, KEY_F1),
- KEY(0, 3, KEY_DOWN),
- KEY(1, 1, KEY_F2),
- KEY(1, 2, KEY_RIGHT),
- KEY(2, 0, KEY_F3),
- KEY(2, 1, KEY_F4),
- KEY(2, 2, KEY_UP),
- KEY(3, 2, KEY_ENTER),
- KEY(3, 3, KEY_LEFT),
- 0
-};
static struct mtd_partition innovator_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
.resource = &innovator_flash_resource,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "OMAP Innovator AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // aic23_configure,
- .codec_set_samplerate = NULL, // aic23_set_samplerate,
- .codec_clock_setup = NULL, // aic23_clock_setup,
- .codec_clock_on = NULL, // aic23_clock_on,
- .codec_clock_off = NULL, // aic23_clock_off,
- .get_default_samplerate = NULL, // aic23_get_default_samplerate,
-};
-
-static struct platform_device innovator_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
-static struct resource innovator_kp_resources[] = {
- [0] = {
- .start = INT_KEYBOARD,
- .end = INT_KEYBOARD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct omap_kp_platform_data innovator_kp_data = {
- .rows = 8,
- .cols = 8,
- .keymap = innovator_keymap,
-};
-
-static struct platform_device innovator_kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &innovator_kp_data,
- },
- .num_resources = ARRAY_SIZE(innovator_kp_resources),
- .resource = innovator_kp_resources,
-};
-
-
#ifdef CONFIG_ARCH_OMAP15XX
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
{
.resource = innovator1510_smc91x_resources,
};
-static struct platform_device innovator1510_lcd_device = {
- .name = "lcd_inn1510",
- .id = -1,
-};
-
-static struct platform_device innovator1510_spi_device = {
- .name = "spi_inn1510",
- .id = -1,
-};
-
static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device,
&innovator1510_smc91x_device,
- &innovator_mcbsp1_device,
- &innovator_kp_device,
- &innovator1510_lcd_device,
- &innovator1510_spi_device,
};
-static int innovator_get_pendown_state(void)
-{
- return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
-}
-
-static const struct ads7846_platform_data innovator1510_ts_info = {
- .model = 7846,
- .vref_delay_usecs = 100, /* internal, no capacitor */
- .x_plate_ohms = 419,
- .y_plate_ohms = 486,
- .get_pendown_state = innovator_get_pendown_state,
-};
-
-static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
- /* FPGA (bus "10") CS0 has an ads7846e */
- .modalias = "ads7846",
- .platform_data = &innovator1510_ts_info,
- .irq = OMAP1510_INT_FPGA_TS,
- .max_speed_hz = 120000 /* max sample rate at 3V */
- * 26 /* command + data + overhead */,
- .bus_num = 10,
- .chip_select = 0,
-} };
-
#endif /* CONFIG_ARCH_OMAP15XX */
#ifdef CONFIG_ARCH_OMAP16XX
.resource = innovator1610_smc91x_resources,
};
-static struct platform_device innovator1610_lcd_device = {
- .name = "inn1610_lcd",
- .id = -1,
-};
-
static struct platform_device *innovator1610_devices[] __initdata = {
&innovator_flash_device,
&innovator1610_smc91x_device,
- &innovator_kp_device,
- &innovator1610_lcd_device,
};
#endif /* CONFIG_ARCH_OMAP16XX */
};
static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+ .panel_name = "inn1510",
.ctrl_name = "internal",
};
#endif
};
static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+ .panel_name = "inn1610",
.ctrl_name = "internal",
};
#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
- spi_register_board_info(innovator1510_boardinfo,
- ARRAY_SIZE(innovator1510_boardinfo));
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
git://git.onelab.eu / linux-2.6.git / blobdiff