*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/fb.h>
#include <asm/hardware.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
#include <asm/arch/poodle.h>
#include <asm/arch/pxafb.h>
.resource = poodle_scoop_resources,
};
+static void poodle_pcmcia_init(void)
+{
+ /* Setup default state of GPIO outputs
+ before we enable them as outputs. */
+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+ GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+ GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+ GPIO_bit(GPIO53_nPCE_2);
+
+ pxa_gpio_mode(GPIO48_nPOE_MD);
+ pxa_gpio_mode(GPIO49_nPWE_MD);
+ pxa_gpio_mode(GPIO50_nPIOR_MD);
+ pxa_gpio_mode(GPIO51_nPIOW_MD);
+ pxa_gpio_mode(GPIO55_nPREG_MD);
+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
+ pxa_gpio_mode(GPIO52_nPCE_1_MD);
+ pxa_gpio_mode(GPIO53_nPCE_2_MD);
+ pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
+static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
+{
+ .dev = &poodle_scoop_device.dev,
+ .irq = POODLE_IRQ_GPIO_CF_IRQ,
+ .cd_irq = POODLE_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},
+};
+
+static struct scoop_pcmcia_config poodle_pcmcia_config = {
+ .devs = &poodle_pcmcia_scoop[0],
+ .num_devs = 1,
+ .pcmcia_init = poodle_pcmcia_init,
+};
+
+EXPORT_SYMBOL(poodle_scoop_device);
+
/* LoCoMo device */
static struct resource locomo_resources[] = {
.resource = locomo_resources,
};
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static struct pxamci_platform_data poodle_mci_platform_data;
+
+static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+ int err;
+
+ /* setup GPIO for PXA25x MMC controller */
+ pxa_gpio_mode(GPIO6_MMCCLK_MD);
+ pxa_gpio_mode(GPIO8_MMCCS0_MD);
+ pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
+ pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
+
+ poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+ err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if (( 1 << vdd) & p_d->ocr_mask)
+ GPSR1 = GPIO_bit(POODLE_GPIO_SD_PWR);
+ else
+ GPCR1 = GPIO_bit(POODLE_GPIO_SD_PWR);
+}
+
+static void poodle_mci_exit(struct device *dev, void *data)
+{
+ free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
+}
+
+static struct pxamci_platform_data poodle_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = poodle_mci_init,
+ .setpower = poodle_mci_setpower,
+ .exit = poodle_mci_exit,
+};
+
+
+/*
+ * Irda
+ */
+static void poodle_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+ } else {
+ GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
+ }
+}
+
+static struct pxaficp_platform_data poodle_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = poodle_irda_transceiver_mode,
+};
+
+
+/*
+ * USB Device Controller
+ */
+static void poodle_udc_command(int cmd)
+{
+ switch(cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
+ break;
+ }
+}
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+ /* no connect GPIO; poodle can't tell connection status */
+ .udc_command = poodle_udc_command,
+};
+
+
/* PXAFB device */
static struct pxafb_mach_info poodle_fb_info __initdata = {
.pixclock = 144700,
{
int ret = 0;
+ /* setup sleep mode values */
+ PWER = 0x00000002;
+ PFER = 0x00000000;
+ PRER = 0x00000002;
+ PGSR0 = 0x00008000;
+ PGSR1 = 0x003F0202;
+ PGSR2 = 0x0001C000;
+ PCFR |= PCFR_OPDE;
+
/* cpu initialize */
/* Pgsr Register */
PGSR0 = 0x0146dd80;
GPSR2 = 0x00000000;
set_pxa_fb_info(&poodle_fb_info);
+ pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
+ pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
+ pxa_set_udc_info(&udc_info);
+ pxa_set_mci_info(&poodle_mci_platform_data);
+ pxa_set_ficp_info(&poodle_ficp_platform_data);
+
+ platform_scoop_config = &poodle_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
-}
-
-static struct map_desc poodle_io_desc[] __initdata = {
- /* virtual physical length */
- { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
-};
-
-static void __init poodle_map_io(void)
-{
- pxa_map_io();
- iotable_init(poodle_io_desc, ARRAY_SIZE(poodle_io_desc));
-
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x00008000;
- PGSR1 = 0x003F0202;
- PGSR2 = 0x0001C000;
- PCFR |= PCFR_OPDE;
+ mi->nr_banks=1;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (32*1024*1024);
}
MACHINE_START(POODLE, "SHARP Poodle")
- BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
- FIXUP(fixup_poodle)
- MAPIO(poodle_map_io)
- INITIRQ(pxa_init_irq)
- .timer = &pxa_timer,
- .init_machine = poodle_init,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = fixup_poodle,
+ .map_io = pxa_map_io,
+ .init_irq = pxa_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = poodle_init,
MACHINE_END
git://git.onelab.eu / linux-2.6.git / blobdiff