#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
+#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
*
* Setup a VA for the Versatile Vectored Interrupt Controller.
*/
-#define VA_VIC_BASE IO_ADDRESS(VERSATILE_VIC_BASE)
-#define VA_SIC_BASE IO_ADDRESS(VERSATILE_SIC_BASE)
-
-static void vic_mask_irq(unsigned int irq)
-{
- irq -= IRQ_VIC_START;
- writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
- irq -= IRQ_VIC_START;
- writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE);
-}
-
-static struct irqchip vic_chip = {
- .ack = vic_mask_irq,
- .mask = vic_mask_irq,
- .unmask = vic_unmask_irq,
-};
+#define __io_address(n) __io(IO_ADDRESS(n))
+#define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE)
+#define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE)
static void sic_mask_irq(unsigned int irq)
{
irq += IRQ_SIC_START;
desc = irq_desc + irq;
- desc->handle(irq, desc, regs);
+ desc_handle_irq(irq, desc, regs);
} while (status);
}
void __init versatile_init_irq(void)
{
- unsigned int i, value;
+ unsigned int i;
- /* Disable all interrupts initially. */
+ vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
- writel(0, VA_VIC_BASE + VIC_INT_SELECT);
- writel(0, VA_VIC_BASE + VIC_IRQ_ENABLE);
- writel(~0, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
- writel(0, VA_VIC_BASE + VIC_IRQ_STATUS);
- writel(0, VA_VIC_BASE + VIC_ITCR);
- writel(~0, VA_VIC_BASE + VIC_IRQ_SOFT_CLEAR);
-
- /*
- * Make sure we clear all existing interrupts
- */
- writel(0, VA_VIC_BASE + VIC_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- value = readl(VA_VIC_BASE + VIC_VECT_ADDR);
- writel(value, VA_VIC_BASE + VIC_VECT_ADDR);
- }
-
- for (i = 0; i < 16; i++) {
- value = readl(VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
- writel(value | VICVectCntl_Enable | i, VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
- }
-
- writel(32, VA_VIC_BASE + VIC_DEF_VECT_ADDR);
-
- for (i = IRQ_VIC_START; i <= IRQ_VIC_END; i++) {
- if (i != IRQ_VICSOURCE31) {
- set_irq_chip(i, &vic_chip);
- set_irq_handler(i, do_level_IRQ);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
- }
-
- set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
- vic_unmask_irq(IRQ_VICSOURCE31);
+ set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
/* Do second interrupt controller */
writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
}
static struct map_desc versatile_io_desc[] __initdata = {
- { IO_ADDRESS(VERSATILE_SYS_BASE), VERSATILE_SYS_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SIC_BASE), VERSATILE_SIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_VIC_BASE), VERSATILE_VIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SCTL_BASE), VERSATILE_SCTL_BASE, SZ_4K * 9, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_SYS_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_VIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_VIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
+ .length = SZ_4K * 9,
+ .type = MT_DEVICE
+ },
#ifdef CONFIG_MACH_VERSATILE_AB
- { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_IB2_BASE), VERSATILE_IB2_BASE, SZ_64M, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
#endif
#ifdef CONFIG_DEBUG_LL
- { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_UART0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
+#endif
+#ifdef CONFIG_PCI
+ {
+ .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_BASE),
+ .length = VERSATILE_PCI_BASE_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_CFG_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
+ .length = VERSATILE_PCI_CFG_BASE_SIZE,
+ .type = MT_DEVICE
+ },
+#if 0
+ {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
#endif
-#ifdef FIXME
- { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE },
- { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE },
- { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_512K, MT_DEVICE },
- { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE },
#endif
};
iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
}
-#define VERSATILE_REFCOUNTER (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
/*
* This is the Versatile sched_clock implementation. This has
}
-#define VERSATILE_FLASHCTRL (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
static int versatile_flash_init(void)
{
.resource = smc91x_resources,
};
-#define VERSATILE_SYSMCI (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
{
static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
- unsigned long sys_lock = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
+ void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
#if defined(CONFIG_ARCH_VERSATILE_PB)
- unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
+ void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
#elif defined(CONFIG_MACH_VERSATILE_AB)
- unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
+ void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
#endif
u32 val;
*/
static struct clcd_panel *versatile_clcd_panel(void)
{
- unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+ void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
struct clcd_panel *panel = &vga;
u32 val;
*/
static void versatile_clcd_disable(struct clcd_fb *fb)
{
- unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+ void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
*/
if (fb->panel == &sanyo_2_5_in) {
- unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+ void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
*/
static void versatile_clcd_enable(struct clcd_fb *fb)
{
- unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
+ void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
*/
if (fb->panel == &sanyo_2_5_in) {
- unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
+ void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
};
#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
static void versatile_leds_event(led_event_t ledevt)
{
/*
* Where is the timer (VA)?
*/
-#define TIMER0_VA_BASE IO_ADDRESS(VERSATILE_TIMER0_1_BASE)
-#define TIMER1_VA_BASE (IO_ADDRESS(VERSATILE_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE IO_ADDRESS(VERSATILE_TIMER2_3_BASE)
-#define TIMER3_VA_BASE (IO_ADDRESS(VERSATILE_TIMER2_3_BASE) + 0x20)
-#define VA_IC_BASE IO_ADDRESS(VERSATILE_VIC_BASE)
+#define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE)
+#define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
+#define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE)
+#define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
+#define VA_IC_BASE __io_address(VERSATILE_VIC_BASE)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD (TIMER_INTERVAL >> 8) /* Divide by 256 */
-#define TIMER_CTRL 0x88 /* Enable, Clock / 256 */
+#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
-#define TIMER_CTRL 0x84 /* Enable, Clock / 16 */
+#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TIMER_RELOAD (TIMER_INTERVAL)
-#define TIMER_CTRL 0x80 /* Enable */
+#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
-#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */
-
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
- unsigned long TimerLoad;
- unsigned long TimerValue;
- unsigned long TimerControl;
- unsigned long TimerClear;
-} TimerStruct_t;
-
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
static unsigned long versatile_gettimeoffset(void)
{
- volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE;
unsigned long ticks1, ticks2, status;
/*
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
- ticks2 = timer0->TimerValue & 0xffff;
+ ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
do {
ticks1 = ticks2;
- status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
- ticks2 = timer0->TimerValue & 0xffff;
+ status = __raw_readl(VA_IC_BASE + VIC_RAW_STATUS);
+ ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
} while (ticks2 > ticks1);
/*
*/
static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-
write_seqlock(&xtime_lock);
// ...clear the interrupt
- timer0->TimerClear = 1;
+ writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
timer_tick(regs);
static struct irqaction versatile_timer_irq = {
.name = "Versatile Timer Tick",
- .flags = SA_INTERRUPT,
- .handler = versatile_timer_interrupt
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = versatile_timer_interrupt,
};
/*
*/
static void __init versatile_timer_init(void)
{
- volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
- volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
- volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
- volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE;
+ u32 val;
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
* VERSATILE_TIMCLK is 1MHz
*/
- *(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |=
- ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
+ val = readl(__io_address(VERSATILE_SCTL_BASE));
+ writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+ __io_address(VERSATILE_SCTL_BASE));
/*
* Initialise to a known state (all timers off)
*/
- timer0->TimerControl = 0;
- timer1->TimerControl = 0;
- timer2->TimerControl = 0;
- timer3->TimerControl = 0;
-
- timer0->TimerLoad = TIMER_RELOAD;
- timer0->TimerValue = TIMER_RELOAD;
- timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE; /* periodic + IE */
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+ writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+ writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
+ writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
+ TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
/*
* Make irqs happen for the system timer
git://git.onelab.eu / linux-2.6.git / blobdiff